How To Fix Samsung TV Anynet+ (HDMI-CEC) Not Working (2026)
Anynet+ is the Samsung TV setting that lets one remote control your soundbar, Blu-ray player or streaming stick.
When it stops working, the TV ignores the connected device, or the device ignores the TV remote.
This guide follows Samsung’s own support pages and covers the menu path for each TV model year, plus every fix Samsung lists.
Quick answer: what to check first
| Symptom | Likely cause | First fix |
|---|---|---|
| Device does not appear on the TV | Anynet+ (HDMI-CEC) is off on the TV or on the device | Turn it on in both places, then wait up to 2 minutes |
| Remote does nothing after connecting | The TV is still setting up the device | Wait until the on-screen message clears |
| Device never responds | It does not support HDMI-CEC, or the cable does not | Check the device manual and try another HDMI cable |
| Device turns on or off with the TV | HDMI-CEC is active on that device | Turn off HDMI-CEC in the device settings |
| Used to work, now does not | Cable change, standby state or old software | Restart the TV, then update its software |
What Anynet+ does
Anynet+ is Samsung’s version of HDMI-CEC, the standard that lets HDMI devices send control commands to each other.
With it on, the TV remote can operate compatible devices such as soundbars, streaming sticks, Blu-ray players and game consoles.
Samsung’s Australian page says it is enabled on most Samsung TVs made after 2008.
What the connected device needs
- It must connect to the TV with an HDMI cable.
- It must support HDMI-CEC, which you can confirm in its manual.
- It must be powered on or in standby to respond.
- It needs an HDMI cable that supports HDMI-CEC, because Samsung notes that some cables do not.
A device without HDMI-CEC cannot be controlled through Anynet+ at all.
Where to turn Anynet+ on for your TV
Samsung moved the setting between model years, so use the row that matches your TV.
| TV model year | Menu path |
|---|---|
| 2025 to 2026 | Settings > All Settings > General & Privacy > External Device Manager > Anynet+ (HDMI-CEC) |
| 2023 to 2024 | Settings > All Settings > Connection > External Device Manager > Anynet+ (HDMI-CEC) |
| 2022 | Settings > General & Privacy > External Device Manager > Anynet+ (HDMI-CEC) |
| 2017 to 2021 | Settings > General > External Device Manager > Anynet+ |
| 2016 | Settings > System > Expert Settings > Anynet+ |
| 2014 to 2015 | Menu > System > Anynet+ |
Menu names can differ slightly by model and region, so check your TV manual if a label is missing.
Turn Anynet+ on step by step
- Press Home on the remote.
- Open Settings, then All Settings.
- Go to the External Device Manager using the path for your model year.
- Select Anynet+ (HDMI-CEC) and switch it on.
- Wait up to 2 minutes while the TV detects connected devices.
Connect a new HDMI device
- Confirm Anynet+ (HDMI-CEC) is on in the TV settings.
- Connect the HDMI-CEC device to an HDMI port on the TV.
- Turn the device on, and it connects automatically.
- Open the device menu on the TV with the TV remote.
Samsung says the connection can take up to 2 minutes.
If the device is not detected
- Confirm the device supports HDMI-CEC and that its own HDMI-CEC option is switched on in its settings.
- Confirm Anynet+ (HDMI-CEC) is on in the TV settings.
- Check the device power cord and the HDMI connection at both ends.
- Turn the TV off and back on after you connect or disconnect an HDMI cable.
- Replace the HDMI cable if it is damaged or does not support HDMI-CEC.
Anynet+ does not work while the TV is scanning channels or performing a factory data reset, so wait for those to finish.
For ports that show no device at all, see our guide to Samsung TV HDMI devices not detected.
The “Connecting to Anynet+ device” message
While the TV shows “Connecting to Anynet+ device…” or “Disconnecting from Anynet+ device”, the remote will not respond.
Wait until setup finishes or the TV returns to the normal viewing screen, then try again.
Stop devices turning on or off with the TV
Some owners want the opposite result, with the soundbar or console staying independent of the TV.
- Open the settings of the connected device.
- Turn off its HDMI-CEC option.
Samsung warns that switching Anynet+ off on the TV does not turn off a soundbar that is connected through the HDMI eARC port.
That is why the setting on the device itself is the one to change, and it also applies to a TV that wakes up on its own, covered in why a Samsung TV turns on by itself.
Anynet+ versus the universal remote setup
A cable box, Blu-ray player or home theater without HDMI-CEC needs the TV’s Universal Remote setup instead.
If a device is set up for both Anynet+ and a universal remote, Samsung says the universal remote alone controls it.
Samsung’s UAE support page also lists a universal remote as a cause of conflicts, so disable it if Anynet+ misbehaves.
Device limits
| Limit | Value |
|---|---|
| Total Anynet+ devices | Up to 12 |
| Devices of the same type | Up to 3 |
| Home theater systems | Only 1 |
If you exceed these numbers, disconnect devices you rarely use.
Update the software and restart
Samsung’s troubleshooting list includes updating the TV through Settings > Support > Software Update.
It also says to restart both the TV and the external device if Anynet+ stops responding.
If the soundbar still has no sound after this, work through Samsung TV ARC not working.
If the TV remote itself is the problem
Anynet+ relies on the TV remote, so a weak remote makes every connected device seem unresponsive.
Check the remote first with our Samsung TV remote not working guide.
When to contact Samsung
If the device still fails with a known HDMI-CEC cable and device, contact Samsung Support through its website.
Have the TV model code and the connected device name ready.