How To Fix Smart View Screen Mirroring To A Samsung TV (2026)
Smart View lets a Galaxy phone or tablet show its screen on a Samsung TV.
When it fails, the TV does not appear in the list, the connection drops, or the picture is far too small.
This guide follows Samsung’s support pages and covers the requirements, every fix Samsung lists, and the other ways to put a phone on the TV.
Quick answer: what to check first
| Symptom | Likely cause | First fix |
|---|---|---|
| TV is not in the Smart View list | Phone and TV are on different Wi-Fi networks | Put both on the same network |
| Connection stalls after you pick the TV | Permission prompt waiting on the TV | Select Allow on the TV screen |
| Network error or video problems | A VPN or an unstable connection | Disconnect the VPN and check the Wi-Fi |
| Picture looks too small | Aspect ratio setting | Change the phone or tablet aspect ratio in Smart View |
| Worked before, fails now | Old software on the phone or the TV | Update both, then restart both |
What Smart View needs
- A Galaxy phone or tablet running Android 4.3 or later, or a device that supports Miracast.
- Both devices on the same network.
- A TV that supports Miracast or Samsung’s own protocol.
Samsung’s US page also warns that DRM-protected content cannot be mirrored.
It adds that Smart View screen mirroring is not available on all devices.
Put the phone and TV on the same network
- Swipe down from the top right of the phone screen to open Quick settings.
- Touch and hold the Wi-Fi icon to open Wi-Fi settings.
- Confirm the phone is on the same network as the TV, or switch it.
- If a VPN error appears, disconnect from the VPN.
Samsung says an unstable connection can cause network errors or video problems.
If the TV itself will not stay online, work through Samsung TV network connectivity failures.
Allow the connection on the TV
- Swipe down from the top right of the phone to open Quick settings.
- Tap the Smart View icon and select your TV.
- When the TV asks for permission, select Allow with the TV remote.
Samsung says some TVs need you to accept the connection on screen before mirroring starts.
Update the TV software
- Press Home on the remote and open Settings.
- Select Support, then Software Update, then Update Now.
- Wait for the download and install, and do not switch the TV off.
The TV restarts on its own when the update finishes, and Samsung says the path can vary slightly by model.
If the update will not start, read Samsung TV software update failures.
Update the phone or tablet
- Open Settings on the Galaxy phone or tablet.
- Tap Software update, then Download and install.
- Follow the prompts to install any update.
Samsung’s US page says to charge the device to at least 50 percent before installing.
The UAE page also suggests checking for app updates in the Galaxy Store or Google Play Store.
Fix a picture that looks too small
- On the phone or tablet, tap the blue Smart View icon.
- Tap Phone or tablet aspect ratio.
- Choose the setting that fills the TV best.
Restart both devices
Samsung says restarting often fixes the problem, so restart the phone and the TV before anything drastic.
| Device | How Samsung says to restart it |
|---|---|
| Samsung TV | Hold the Power button on the remote until the Samsung logo appears, or unplug the power cord and plug it back in |
| Galaxy phone or tablet | Hold the Side and Volume down buttons until the power menu appears, then tap Restart twice |
Other ways to put a phone on a Samsung TV
If Smart View keeps failing, Samsung’s UK page lists other methods.
| Method | Requirement |
|---|---|
| SmartThings | Phone and TV on the same Wi-Fi, with TVs from 2016 onward usually detected automatically |
| Tap View | Turn it on in SmartThings settings, then tap the phone to the TV bezel and choose Allow |
| AirPlay (Apple devices) | Samsung TV made after 2019, on the same Wi-Fi |
| HDMI adaptor | A USB-C device with an adaptor, with the TV set to that HDMI input |
| Casting apps | A cast-enabled app on both, signed in to the same account |
Samsung says older TVs that SmartThings does not detect should use Smart View instead.
Apple users can follow our Samsung TV AirPlay fix.
Mirror with SmartThings instead
- Connect the phone and TV to the same Wi-Fi network.
- Open SmartThings, tap +, then Add device.
- Select your TV and enter the PIN shown on the TV.
- Tap the three-dot menu, then Mirror screen (Smart View).
If the TV does not appear, Samsung says to make sure it is on, switch it off and on, restart the app and reboot the router if needed.
Start Smart View from the phone settings
Samsung’s UK page gives a second route to whole-screen mirroring that skips the Quick settings tile.
- Open Settings on the phone.
- Tap Connected Devices.
- Tap Smart View.
- Choose your TV and allow the connection.
The same page says mirroring must be active on both the device and the TV, and that a restart of both followed by a fresh Allow prompt fixes a missing permission.
Use Tap View to skip the device list
- Open SmartThings, tap Menu, then the Settings icon.
- Tap Tap View, Tap Sound and switch it on.
- Tap the back of the phone to the TV bezel, away from the screen and the corners.
- Tap Start now on the phone, then select Allow on the TV.
For model-specific steps on a newer phone, see how to cast from a Galaxy S25 to your TV.
Last resort: reset the phone
Samsung lists a factory data reset as the final step, and it erases all data on the phone.
Back up first, and note that a reset will not fix a problem caused by an app until that app is updated.
The path on the UAE page is Settings > General Management > Reset > Factory Data Reset.
When to contact Samsung
If mirroring still fails after these steps, Samsung suggests sending an error report or a question through the Samsung Members app.
You can also contact Samsung Support through its website with the TV model code ready.