|

How To Stop A Samsung TV Turning On By Itself (2026)

If your Samsung TV switches itself on at night, while you are out or the moment you start another device, something is sending it a power-on signal.

It is rarely a sign that the TV is broken, and Samsung lists a short set of usual suspects.

This guide helps you find the trigger and shut it off in about 15 minutes.

Quick answer: what turns a Samsung TV on by itself?

Likely triggerHow to confirmWhere to switch it off
HDMI device (Anynet+ / HDMI-CEC)TV wakes when a console or box powers upSettings, General, External Device Manager, Anynet+ (HDMI-CEC)
Phone or SmartThings appTV wakes when a phone joins the networkSettings, Connections, Network, Expert Settings, Power On with Mobile
Ambient Mode sensor, Bluetooth, Wake-on-LAN, voice or appsEvent log shows the power-on reasonTurn off the device or feature the log names
Damaged power cord or loose cableTV turns on and off at randomReplace the cord or reseat cables

Why does a Samsung TV turn on by itself?

Samsung says connected HDMI devices can turn the TV on when they power up, which is how Anynet+ is meant to work.

It also lists unwanted wireless power-on signals from devices on your network, including phones using SmartThings.

Other triggers named on Samsung support pages include the Ambient Mode sensor, a paired Bluetooth device, Wake-on-LAN signals, voice control and apps such as YouTube on the same network.

Step 1: Unplug the TV for 30 seconds

Samsung US recommends a simple power cycle first.

  1. Turn the TV off and unplug it.
  2. Wait at least 30 seconds.
  3. Plug it back in and watch whether it wakes up again.

Step 2: Check the power cord and outlet

Visible damage to the power cord can cause the TV to cycle on and off.

  • Look along the whole cord for cuts or crushed sections.
  • Plug the TV straight into a wall outlet instead of a surge protector.
  • If the cord is damaged, Samsung points owners to samsungparts.com for a replacement.

Step 3: Read the TV event log

On 2019 and newer models with current firmware, Samsung says the TV records why it powered on.

  1. Open Menu, then Support, then About TV.
  2. Select Event logs.
  3. Look at the Power-on reason entry.
Power-on reasonWhat it meansWhat to do
YouTube or appAn app or SmartThings on another device on your networkSign out or disable that app on the other device
SensorThe Ambient Mode brightness sensorTurn off the Ambient Mode feature
WOLA Wake-on-LAN Magic PacketDisable the device or app sending it
BLEA Bluetooth device wake-upUnpair or disable the device
CEC commandAn HDMI device turned the TV onTurn off Anynet+ (HDMI-CEC)

Samsung also lists voice control as a trigger that the log may not name.

An entry reading One Invisible connection points to a poor connection between the TV and its connected device, so check those cable connections too.

The About TV menu is only available on 2019 and later models.

Step 4: Turn off Anynet+ (HDMI-CEC)

This stops game consoles, soundbars and streaming boxes from waking the TV.

  1. Press Home and open Settings.
  2. Select General, then External Device Manager.
  3. Turn Anynet+ (HDMI-CEC) off.

After this, your TV remote will no longer control both devices, according to Samsung.

If your devices stop being detected afterward, see our guide to Samsung TV HDMI devices not detected.

Step 5: Isolate each HDMI device

Samsung Australia suggests unplugging every HDMI cable, then reconnecting devices one at a time.

The device that makes the TV wake up again is the culprit, and a firmware update from its maker often cures it.

Step 6: Turn off Power On with Mobile

This option lets phones and the SmartThings app wake the TV.

  1. Open Settings, then Connections or General, depending on your model.
  2. Select Network, then Expert Settings.
  3. Turn Power On with Mobile off.

Samsung notes that this also stops you from powering the TV on with SmartThings.

What if the TV switches HDMI inputs by itself?

Samsung says some connected devices send a signal in error even when idle, and the usual fix is a firmware update for that device.

The same page lists a hidden remote sequence on some TVs that was added by software update, so update the TV first.

Remote typeSequence to press (TV on its own source)
Standard IR remoteMute, 7, 2, 9, Exit
Smart remoteMute, Vol Down, Ch Down, Mute

No on-screen message appears, so turn on an HDMI device afterward to test it.

Does the TV also switch itself off?

Samsung Australia says three timer settings can turn the TV off automatically, so check them if yours shuts down on a schedule.

SettingMenu path
Sleep TimerSettings, All Settings, General & Privacy, System Manager, Time, Sleep Timer
Auto Power OffSettings, All Settings, General & Privacy, Power and Energy Saving, Auto Power Off
Off TimerSettings, All Settings, General & Privacy, System Manager, Time, Off Timer

Menu paths may vary by model, and the same page also blames weak cable connections for random on and off behavior.

Step 7: Update the software

  1. Open Settings and select Support.
  2. Select Software Update, then Update Now.

Samsung recommends running the latest TV software before trying the deeper steps.

Step 8: Reset the TV as a last resort

Samsung Saudi Arabia lists Home, Settings, General, Reset for restoring the original settings.

You will need to set the TV up again, so only do this once the earlier steps have failed.

If the opposite happens and the TV will not stay off, read our guide to a Samsung TV that will not turn off.

For a TV that restarts in a loop, see Samsung TV power cycling, and for soundbar audio trouble see Samsung TV ARC problems.

When to request service

If the problem continues after these steps, Samsung US says to request service through its Support Center.

Menu paths can vary by model, so check your manual if a setting is missing.

Official sources

Leave a Reply

Your email address will not be published. Required fields are marked *