How To Update A TCL TV And Fix Failed Updates (2026)
A TCL TV updates itself on most setups, but the manual check is easy to find once you know your platform.
The steps below come from TCL support pages for Google TV, Roku TV and Fire TV models.
They also cover what to do when the update will not start, fails, or the TV is not online.
Quick answer: where the update setting lives
The menu path depends on which operating system your TCL TV runs.
| TV platform | Where to check | Message when nothing is pending |
|---|---|---|
| TCL Google TV | Settings > System > About > System update | Your System Is Up to Date |
| TCL Roku TV | Settings > System > System update > Check now | All Software Is Up to Date |
| TCL Fire TV | Settings > My Fire TV (or Device & Software) > About > Check for System Update | No update found |
Menu names can vary slightly by model and software version, according to TCL.
Before you start
TCL lists a few requirements that apply to every platform.
- Connect the TV to the internet, using Ethernet if your model has a LAN port.
- Keep the TV powered on, and do not unplug it or cut power at the outlet while it updates.
- Use a strong Wi-Fi signal, and restart when the TV asks you to.
- Check again after the restart in case another update is waiting.
Update a TCL Google TV
TCL gives one standard path for Google TV models.
- Press Home on the remote.
- Open Settings, then System, then About, then System update.
- Select Check for update if it is shown.
- Choose Download, Install, or Update when an update appears.
- Wait for the download, follow the prompts, and let the TV restart.
Some software versions label the button Network Update instead of Check for update.
After the restart, return to the same screen to confirm the TV is up to date.
Update a TCL Roku TV
Roku TV models use a shorter path.
- Press Home on the remote.
- Go to Settings, then System, then System update.
- Select Check now, which checks for both system software and channel updates.
- Select Update now if an update is offered.
- Let the TV restart, then run Check now again to confirm nothing else is pending.
The same screen can show the current software version, the build number, and when the TV last checked.
Automatic updates
Both platforms can update without you doing anything.
| Platform | What TCL says |
|---|---|
| Roku TV | An activated, internet-connected TV checks every 24 to 36 hours and installs updates without interrupting viewing |
| Google TV | Turn on Auto Update under Settings > System > About > System update if the option appears |
| Google TV, no option | The TV may already update itself in the background |
A TV that says it is up to date may simply have no newer software for its model yet, because updates roll out by model and platform.
If the update will not start or fails
TCL recommends working through these checks in order.
- Confirm the TV is on the right Wi-Fi network and that the password is correct.
- Restart the router and modem by unplugging them for about 30 seconds, or switch to Ethernet.
- Restart the TV, or unplug it for at least 60 seconds, plug it back in, and check again.
- Free up space by uninstalling apps you do not use, because low storage can stop a download or install.
- Wait a while and try again if the update server is busy or your connection is unstable.
A factory reset is not normally needed to check for or install updates.
Give it enough time
Updates can take several minutes and may include more than one restart.
A stuck-looking screen is not a reason to pull the plug, because interrupting an update is exactly what TCL warns against.
Roku TV update by USB (TV not connected)
This method is for a Roku TV that has not been activated, where you chose Connect to the internet later during setup.
- On a computer, not a smartphone, open tvupdate.roku.com and pick TCL from the brand list.
- Enter your model number, which you can find on the TV under Home > Settings > System > System update > I can’t connect.
- Select Download Software to save the update.roku file.
- Copy update.roku to the top-level folder of a USB 2.0 flash drive of 256MB or larger.
- Plug the drive into the TV, then open Home > Settings > System > System update > I can’t connect.
- Enter the 12-digit code the TV shows into the website to get a 6-digit code.
- Type the 6-digit code on the TV, and remove the drive after it restarts.
The model number is four digits followed by a letter, for example 6104X.
USB error messages
| Message on the TV | What it means |
|---|---|
| Update file could not be opened. Please try again. | The drive format is not recognized, so reformat it |
| Contents of the update file are invalid | The TV already has the latest software |
Formatting the USB drive
Formatting erases everything on the drive, so back up anything you need first.
| Computer | Where to format | Format to choose |
|---|---|---|
| Windows | Control Panel > Administrative Tools > Computer Management > Disk Management, right-click the drive, Format | FAT32 above 2GB, FAT16 below |
| Mac | Disk Utility, select the drive, Erase tab | MS-DOS (FAT) |
System updates versus app updates
A system update changes the operating system, while app updates are handled separately.
On a Google TV, app updates live in the Google Play Store settings.
On a Roku TV, Check now covers channel updates alongside system software.
Only use official update methods
TCL says to install updates only through the TV menu or TCL Support.
Do not install software files from unofficial sites.
When to contact TCL support
If the TV still will not update, TCL asks you to have a few details ready.
- The model number
- The serial number, on the back label or in the settings menu
- The current software version, if available
- A description of the problem
- Any error message shown on screen
Related guides on this site: TCL TV Wi-Fi problems, clearing the cache on a TCL TV, hard resetting a TCL TV, and updating a Sony TV.
Sources: the TCL support page for Google TV updates, the TCL Roku TV update page, and TCL general update guide.