|

How To Fix Sony Google TV Software Update Not Working (2026)

A Sony Google TV software update that will not download or finish is usually a connection or restart problem, and Sony has a fixed set of steps for it.

Sony also offers a USB method that works without internet, so you are not stuck if the TV cannot reach its servers.

This guide covers how to update normally, what to try when it stalls and how to install from a USB drive.

Quick answer: fixes in order

StepWhat to doSource
1Restart the TV with the remote, then try the update againSony update troubleshooting
2Power reset: unplug for 60 seconds, plug into the wallSony update troubleshooting
3Run a Network Diagnosis and check every result is OKSony update troubleshooting
4Install from a USB flash driveSony software update guide

How to update a Google TV normally

Sony recommends the automatic update over the internet.

  1. Press the Quick Settings button, then open Settings.
  2. Go to System, then About, then System software update.
  3. Confirm that Automatically check for updates is on.
  4. When a notification appears, choose UPDATE or UPDATE NOW and follow the prompts.

On some models Sony says to select Details, then Download, and choose OK when asked to install.

Check for an update manually

You can also ask the TV to look for an update yourself.

TV typeMenu path
Most Google TV modelsQuick Settings → Settings → System or Device Preferences → About → System Update → Check for update
BRAVIA 6 (A60)Home → Dashboard (gear) → All Settings → System → About → System update
Android TV and other modelsHELP → Status & Diagnostics → System Software Update → Software Update

If you see Your software is up to date, there is nothing to install.

If an update is found, the TV shows that the update is ready and walks you through it.

Update prompts differ by model

Sony says the wording and buttons are not the same on every TV.

Model groupWhat Sony says happens
Most modelsA notification appears, then choose UPDATE or UPDATE NOW
Some Google TV models (W8, X7, X74H and X75H series)Choose Details, then Download, then OK to install
Some modelsThe TV updates automatically with no settings change
Certain exclusion modelsPress and hold HOME, select the System software update banner, then choose Restart Now

If the prompt on your screen does not match the first row, look for your model group in the table.

Sony also says direct updates need an internet connection, so use the USB method when the TV is offline.

What to avoid while it installs

Sony warns not to press buttons, turn off the TV or unplug it during installation.

Interrupting power may leave the TV unresponsive or in need of repair.

Sony says updates typically take about 15 to 30 minutes, and the update continues even if you switch the TV off.

After an update, the remote may not respond for 2 to 3 minutes if you turn the TV off.

Restart or power reset the TV first

When an update will not complete from the menu, Sony starts with a restart or reset.

  1. Hold POWER on the remote until Power off appears, or until a menu appears and you can choose Restart.
  2. Or restart through Quick Settings → Settings → System, or HOME → Settings → About, then choose Restart.
  3. If that fails, turn off the TV, unplug it for 60 seconds and plug it back in.

If you use a power strip or surge protector, Sony says to plug the TV directly into the wall.

Try the update again after each step.

Check the network connection

Sony says likely causes are connection problems, server errors or an unstable internet connection.

Run a Network Diagnosis on the TV and confirm every Connection result shows OK or Found.

If the diagnosis fails, how to fix a Sony TV that will not connect to Wi-Fi is the next place to look.

Automatic download on older TVs

On some TVs from 2019 or earlier, Sony says to turn on Automatic software download so updates can download in standby.

TVMenu path
Android TVHELP → System software update → Automatic software download → On
Other TVsHOME → Settings → Customer Supports → Automatic software download → On

Sony says this does not apply to Google TV models.

Install the update from a USB drive

The USB method needs no internet connection on the TV.

  1. On a computer, open Sony’s support site, search for your TV model and open Downloads.
  2. If you do not know the model, check the sticker at the lower left of the back panel.
  3. Copy the update file to a USB flash drive, in the root folder and not inside another folder.
  4. Follow the download page instructions to install it on the TV.

Sony says the drive must be formatted as FAT16, FAT32, exFAT or NTFS and have enough free space.

If the USB update fails

Sony lists three steps for a USB update that fails.

  1. Delete other files so only the update file is in the root folder, then try again.
  2. Format the drive as FAT32 and retry.
  3. Try a different FAT32-formatted drive.

Update error codes and forced updates

Sony has separate articles for a forced system software update and for errors 1106, 1107 and 2123.

It also has one for an update that fails or takes a long time.

Search for those titles on Sony’s support site if the steps above do not work.

If the TV locks up during or after an update, see Sony TV is frozen.

If it hangs at the boot screen, Sony TV stuck on logo screen is the better match.

A TV that restarts on its own is covered in Sony TV keeps rebooting.

When to contact Sony support

Sony’s article does not name a point at which to call, but it links to Sony’s Contact Support, Product Repair and Community pages.

Mention which steps you tried and any error code, because Sony treats those codes as separate cases.

Sources

Leave a Reply

Your email address will not be published. Required fields are marked *