How To Align The Print Head On An Epson Printer (2026)

If text on an Epson printout looks blurry or vertical lines do not line up, aligning the print head is one of the fixes Epson lists.

You can start the alignment from the printer’s own screen on most models, or from a utility on your computer.

This guide gives the menu paths from Epson’s support pages and explains which alignment to choose for which problem.

Quick answer: which alignment to run

What your printout looks likeAlignment Epson says to choose
Blurry or grainy printsVertical Alignment
Vertical ruled lines do not line upVertical Alignment (some models call it Ruled Line Alignment)
Dark or light horizontal bandsHorizontal Alignment

The menu path on most printer screens is Maintenance, then Print Head Alignment.

When Epson says to align the print head

On the ET-8500 series page, Epson says to align the print head if prints look grainy or blurry, if vertical lines do not line up, or if you see dark or light horizontal bands.

The same page adds that if alignment does not fix banding, cleaning the print head is the next step.

If your prints are only faint or have missing colors, start with the nozzle check instead, since that points to clogged nozzles rather than alignment.

Before you start

Epson’s pages ask for the same few things on every model.

  • Load a few sheets of plain paper.
  • Make sure the printer screen shows no errors.
  • Do not cancel the job while the alignment pattern is printing.

On the ET-8500 series, Epson says to load the plain paper in Cassette 2, the lower cassette, and to remove any CD or DVD tray.

On the ET-2750 series, Epson also says to extend the output tray before printing.

Run a nozzle check first

Epson’s page for white or dark lines in a printout lists a nozzle check as its first solution.

Several Epson alignment pages also note that banding can be caused by clogged nozzles, so cleaning may be needed instead.

Our Epson clogged nozzle guide walks through the nozzle check and head cleaning.

Align from the printer’s control panel

On Epson models with a menu screen, such as the XP and ET series, the steps follow this order.

  1. Load plain paper and press the home button if needed.
  2. Select Maintenance.
  3. Select Print Head Alignment.
  4. Choose the alignment type that matches your problem.
  5. Follow the prompts to print the alignment sheet.
  6. Pick the best pattern in each set and enter its number on the screen.
  7. Select Done or follow the final prompt.

The exact wording changes by model, so use the table below to see what Epson lists for each series.

Menu path by printer series

SeriesPath Epson listsChoices
ET-8500 / ET-8550Maintenance, then Print Head AlignmentVertical Alignment or Horizontal Alignment
XP-4200Maintenance, then Print Head AlignmentVertical Alignment, then Horizontal Alignment
WF-3720 / WF-4730Maintenance, then Print Head AlignmentRuled Line, Vertical or Horizontal Alignment
ET-2750Maintenance, then OK, then Print Head Alignment, then OKVertical Alignment or Horizontal Alignment
ET-2650Setup, then Maintenance, then Head AlignmentArrow buttons and OK; select the number for each set

These are the series Epson names on the pages used here, and other models follow a similar pattern.

Pick the best pattern on the sheet

Each alignment prints a sheet with numbered patterns.

AlignmentWhat to look for
Ruled Line AlignmentChoose pattern 1 or 2, whichever has the least misaligned vertical line
Vertical AlignmentChoose the pattern with the least separation or overlap in each set (1 through 4 on the WF-3720 and WF-4730 page)
Horizontal AlignmentChoose the pattern with the least separation or overlap

On the ET-2750, Epson says to look for the most solid-looking print in each set.

Enter the number on the printer screen for every set.

Align from Windows

Epson’s computer utility page says this for Windows.

  1. Load a few sheets of plain paper in the printer.
  2. Right-click your printer’s icon in the taskbar, and click the up arrow first if you do not see it.
  3. Select Print Head Alignment.
  4. Click Next, then click Print to print an alignment sheet.
  5. Choose the number of the best pattern in each vertical and horizontal set, then click Next.
  6. Click Finish.

If no pattern in a set looks aligned, choose the closest one and click Realignment, then print and check another sheet.

Epson also says a Skip button lets you skip a particular sheet where it is offered.

Align from a Mac

For macOS, Epson’s page describes the older System Preferences layout, so the names may differ on your version.

  1. Open System Preferences and select Print and Fax, Print and Scan, or Printers and Scanners.
  2. Choose your Epson printer.
  3. Select Options and Supplies, then Utility, then Open Printer Utility.
  4. Select Print Head Alignment and follow the same prompts as on Windows.

If you cannot find the printer utility on a newer Mac, use the printer’s own Maintenance menu instead.

If the print still looks wrong

Epson’s page for white or dark lines lists more solutions after alignment.

Next thing Epson listsDetail
Bidirectional settingIf alignment does not improve quality, turn off the bidirectional (high-speed) setting
Paper settingsMake sure the paper type setting matches the paper you loaded
Fine-tune the alignmentIf bands persist after cleaning and aligning, fine-tune the alignment in the Maintenance menu
Paper pathFor vertical banding or smeared paper, clean the paper path
Ink levelCheck the ink level visually and refill if needed
Power CleaningOnly for a printer unused for a long time, because it uses a lot of ink

Our Epson EcoTank ink not flowing guide covers the ink side of EcoTank models.

If the printer will not take ink cartridges, see our Epson cartridge not recognized guide.

If pages jam in the printer, read the Epson paper jam guide.

For double-sided pages, use our Epson double-sided printing guide.

Official Epson sources

Leave a Reply

Your email address will not be published. Required fields are marked *