How To Fix An Epson Printer Paper Jam Or Not Feeding (2026)

An Epson printer that shows a paper jam message or will not pull paper in usually has a sheet trapped in one of a few known places.

Epson’s support pages give a clear order for clearing it, starting with the on-screen prompts.

This guide follows those pages, from the quick checks to the last-resort steps, and notes where your model may differ.

Quick answer: what to do first

ProblemWhat Epson says to do
Paper jam messageCancel the print job, then clear the jam by following the LCD instructions
Paper does not feedRemove the paper, fan it, reload it below the edge-guide tabs and adjust the guides
Several sheets feed at onceFan the edges apart and reload, or load one sheet at a time
Jam during two-sided printingLoad fewer sheets
Error stays after removing paperCheck the other jam locations, then contact Epson support

Start with the cancel and the screen prompts

Epson’s jam pages begin with cancelling the print job from your computer, if needed.

On models with a screen, Epson’s guide says to follow the LCD instructions to clear the jam first.

If the message is still there afterwards, work through the locations below.

Where the paper can be trapped

Epson has a separate page for each place paper can stick, and the right one depends on your model.

LocationHow you reach it
Rear paper feed slotPull the paper out gently from the back
Inside the productLift the scanner unit
Rear cover or duplexerRelease and remove the cover from the back
Front cover areaOpen the front cover (L1110-style models)
Output tray and sheet feederRemove paper gently from both (XP-400)
Paper cassettePull out the cassette

Clear a jam inside the printer

Epson’s WF-3620 and WF-7620 page gives these steps for paper inside the product.

  1. Cancel the print job, if necessary.
  2. Remove any jammed paper from the rear paper feed slot.
  3. Lift the scanner unit.
  4. Remove any paper inside, including torn pieces.
  5. Close the scanner unit.
  6. Follow the LCD prompts to clear the error.

Epson warns not to touch the translucent film inside the printer.

It also warns not to lift the scanner unit while the document cover is open.

Clear a jam on a smaller XP model

Epson’s XP-400 page uses a shorter routine that starts at the trays.

  1. Cancel the print job from your computer if necessary.
  2. Gently remove jammed paper from the output tray and the sheet feeder.
  3. Press the start button to resume printing.
  4. If the error remains, press the power button to turn the product off.
  5. Lift the scanner unit and remove the jammed paper and any torn pieces.
  6. Lower the scanner unit and turn the product back on.

Epson adds that you should follow the paper loading instructions carefully when you load new paper.

Clear a jam through the rear cover

On the ET-2700 and ET-2750, Epson tells you to remove the rear cover to reach the paper.

  1. Cancel the print job, if necessary.
  2. Press the buttons to release the rear cover and remove it.
  3. Carefully remove any jammed paper from inside the product.
  4. Remove any jammed paper from the rear cover.
  5. Press in the buttons and reattach the rear cover.
  6. Press the B&W copy or color copy button to clear the error.

If the error persists, Epson says to try its other paper jam solutions.

Clear a jam from the rear paper feed and front cover

Epson’s L1110 page covers printers that load paper at the back.

  1. Gently pull jammed paper out of the rear paper feed slot.
  2. Open the front cover.
  3. Gently remove any jammed paper.
  4. Close the front cover.

Epson says not to touch the parts shown in its inside-of-printer illustration, or you may damage the product.

If the error continues after you turn the power off and on, paper may still be inside.

In that case Epson says to load letter or A4 paper in the rear paper feed and press the stop button.

If the paper is still stuck

Epson’s WF-630 guide has a last-resort routine for jams you cannot reach.

  1. Turn off the product, unplug it and disconnect all cables.
  2. Pull out the paper cassette.
  3. Carefully stand the product on its side.
  4. Remove the jammed paper carefully.
  5. Return the product to its base and reinsert the cassette.
  6. Plug the power cord back in.

Epson also cautions you not to damage the internal cables and not to move the print head by hand.

Paper will not feed or several sheets feed together

Epson’s feeding pages group the common causes and fixes together.

SymptomEpson’s fix
Paper does not feedPush the cassette all the way in, reload the paper and adjust the edge guides
Stack too highKeep the stack below the tab or arrow mark on the edge guides
Multiple sheets at onceFan the edges apart and reload, or feed one sheet at a time
Damp paperLoad new, dry paper
Paper out error with paper loadedReload the paper in the center of the tray (cassette models)
Wrinkled outputMatch the paper type setting to the paper you loaded

Load paper the way Epson recommends

Epson says to use new, smooth, high-quality paper that is not curled, creased, old, too thin or too thick.

Load paper printable side down in a cassette, and printable side up in a rear paper feeder.

Do not load more than the recommended number of sheets, and load fewer for two-sided printing.

Epson also says to place the product on a flat, stable surface, since it will not operate properly if tilted.

Check the paper size and type settings on the control panel, and clean the paper path if feeding problems continue.

When to contact Epson support

If the paper jam error does not clear after you remove the paper and restart, Epson’s L1110 page says to contact Epson support.

If you have tried every location above and the message stays, contact Epson as well.

For ink and print quality problems that follow a jam, see our guides on clogged nozzles and an Epson printer that shows offline.

Sources

Epson support pages used: Paper Jam Problems Inside the Product, Paper Jam in the Rear Cover and Paper Feeding Problems.

Leave a Reply

Your email address will not be published. Required fields are marked *