How To Fix Epson EcoTank Ink Not Flowing Or Air In Tubes (2026)

If your Epson EcoTank prints with gaps or blank lines after you refilled the tanks, air in the ink tubes is a likely reason.

Epson says the tubes may need to be primed with ink, and it offers a flushing routine for exactly that.

This guide follows Epson’s own FAQs and manuals, including the waiting times that are easy to miss.

Quick answer: the order Epson gives

StepWhat to do
1Refill each needed tank to the upper line and reset the ink levels on the screen
2Confirm there are no errors on the screen or error lights on the printer
3Run a nozzle check and, if needed, a print head cleaning
4Run Power Cleaning or Power Ink Flushing for your model
5Turn the printer off and wait before printing again
6If quality does not improve, contact Epson support

When this applies

Epson’s FAQs describe the same situation for several EcoTank models, including the ET-2650, ET-3600 and ET-3950 series.

The nozzle check pattern prints with gaps after the ink tanks were allowed to run empty and then refilled.

Epson’s answer is that the ink tubes may need to be primed with ink.

If your problem is streaks without a recent refill, start with our guide to Epson clogged nozzles instead.

Refill and reset the ink levels first

Epson’s ET-3600 FAQ lists the refill steps that come before any flushing.

  1. Fill each necessary tank to the upper line.
  2. Follow the LCD screen instructions to select and reset the ink levels of the tanks you refilled.
  3. Flush the ink tubes using the printer software or control panel.

Epson says to confirm that no printer lights or screen messages show an error before you flush.

Which flushing method your printer uses

Epson documents more than one routine, and the name and menu depend on the model.

RoutineWhere you start itWait Epson gives afterwards
Power CleaningPrinter screen or Windows and Mac utility (ET-3950 series)At least 12 hours before another cleaning
Power Ink Flushing, utilityMaintenance tab in the Windows or Mac utility (ET-2650, ET-3600)At least 12 hours before printing
Power Ink Flushing, taskbarWindows taskbar icon, Ink Change (one Epson series page)If no improvement, wait at least 6 hours
Power Ink Flushing, buttonsBack button plus power button at startup (one Epson series page)About 9 minutes of flushing; no wait stated

Run Power Cleaning from the printer screen

For the ET-3950 series, Epson’s FAQ gives this control panel routine.

  1. Confirm there are no errors on the LCD screen.
  2. Check that each ink tank is at least one-third full.
  3. Press the home button if needed.
  4. Select Maintenance, then Print Head Cleaning, then Power Cleaning.
  5. Follow the LCD instructions until a confirmation appears.
  6. Run a nozzle check.

Epson cautions that running a Power Cleaning when ink levels are low may damage the product.

Run it from a Windows or Mac utility

Epson’s ET-2650 and ET-3600 FAQs use the printer utility for Power Ink Flushing.

  1. On Windows, right-click the printer icon in the taskbar, choose Printer Settings and open the Maintenance tab.
  2. On a Mac, open System Preferences, choose Printers & Scanners, select the printer, then Options & Supplies, Utility and Open Printer Utility.
  3. Click the Power Ink Flushing button.
  4. Follow the on-screen instructions.

On the ET-3950 series, Epson’s Power Cleaning from the utility is under Print Head Cleaning, and it asks you to extend the output tray and load plain paper first.

Flushing from the printer buttons on some series

Epson’s flushing page for one business-series printer starts flushing at power-on instead of from a menu.

  1. Turn off the product.
  2. Hold down the back button, then press the power button to turn the product on.
  3. When a prompt asks whether to run Power Ink Flushing, select Yes and follow the on-screen instructions.
  4. Wait while flushing runs, which Epson says takes about 9 minutes.
  5. When it finishes, select Print Nozzle Check Pattern.

Check that your model is covered before using this routine, since the startup key combination is not the same on every printer.

Flushing from the Windows taskbar

Another Epson page uses the printer icon near the clock instead of the Maintenance tab.

  1. Make sure the control panel shows no warnings or errors.
  2. Right-click the product icon in the Windows taskbar, select Ink Change, then Power Ink Flushing.
  3. Follow the on-screen instructions.
  4. Run a nozzle check afterwards and clean the print head if needed.

Read the nozzle check after flushing

Epson’s flushing page explains how to judge the printed pattern.

What the pattern showsWhat it meansEpson’s next step
Continuous lines with no gapsThe print head is cleanSelect Done
Gaps or faint linesThe print head is dirtySelect Clean the Print Head

Do not skip the waiting time

Epson’s FAQs say to turn the printer off and wait at least 12 hours after a Power Ink Flushing before printing again.

Printing sooner defeats the purpose of the wait.

A different Epson page for another series says to wait at least 6 hours if quality does not improve, then check again.

Use the time given for your own model’s page when it differs.

What to do if gaps remain

On the ET-3950 series, Epson says to repeat the nozzle check and head cleaning up to three times, or run one Power Cleaning.

If white or dark lines persist, turn the product off, wait at least 12 hours, run a nozzle check and clean again if needed.

If quality still does not improve, Epson says to run Power Ink Flushing, and then to contact Epson support.

Flushing and the maintenance box

One Epson flushing page warns that Power Ink Flushing can reduce the maintenance box’s service life.

Run it only when you need to clear the nozzles, not as routine upkeep.

If your printer already asks for service, see our guide to the Epson ink pad end of service life error.

Sources

Epson pages used: ET-3950 FAQ, ET-2650 FAQ and ET-3600 FAQ.

Leave a Reply

Your email address will not be published. Required fields are marked *