How To Align A Canon Print Head And Fix Error 2900 (2026)

When color edges look shifted or lines look jagged on a Canon PIXMA printout, the print head position may be out of alignment.

Canon’s manuals describe two ways to fix it from a Windows computer: automatic alignment that scans a printed sheet, and manual alignment where you pick the best patterns yourself.

This guide covers both, plus support codes 2900 and 2901, which appear when the printer cannot finish the automatic method.

Quick answer: automatic or manual alignment

MethodPaper Canon says to loadWhere you start it
Automatic alignmentOne sheet of A4 or Letter plain paperPrinter driver, Maintenance tab, Print Head Alignment
Manual alignment, MG3600 seriesThree sheets of A4 or Letter plain paper in the front trayMaintenance tab, Custom Settings, Align heads manually, then Print Head Alignment
Manual alignment, TS5000 seriesTwo sheets of A4 or Letter plain paper in the rear traySame path as above

Canon recommends automatic alignment first on the models we checked, and manual alignment when its results are unsatisfactory.

How to align the print head automatically

These steps come from Canon’s manuals for the MG3600 and MX490 series, so button names can differ slightly on your model.

  1. Open the printer driver setup window.
  2. On the Maintenance tab, click Print Head Alignment, which opens the Start Print Head Alignment dialog box.
  3. Load one sheet of A4 or Letter plain paper in the tray your manual names.
  4. Make sure the printer is on, then click Align Print Head, and the adjustment pattern prints.
  5. When the message appears, place the printed pattern on the platen glass as instructed.
  6. Press the Start button on the printer, and alignment begins.

Canon warns you not to open the paper output cover while printing is in progress.

On the MX490 series, Canon also says the paper information registered for the cassette must be A4 and plain paper, or an error may occur.

What support code 2900 means

Canon’s G2000 series page says code 2900 means the printer could not scan the print head alignment sheet.

The page lists these actions in order.

  1. Press the printer’s Black or Color button, then run automatic print head alignment again.
  2. Check that the alignment sheet is placed correctly on the platen glass, in the right position and orientation.
  3. Check that the platen glass and the alignment sheet are clean.
  4. Load A4 or Letter plain paper, which automatic alignment requires.
  5. Print a nozzle check pattern to confirm the print head nozzles are not clogged.
  6. If the error persists, perform manual print head alignment.

Our guide to Canon printer streaks and blurry prints covers cleaning when the nozzle check shows gaps.

What support code 2901 means

Code 2901 is not a fault, because Canon says the alignment pattern has printed and the printer is waiting to scan it.

  1. Place the printed alignment sheet on the platen glass with the printed side down.
  2. Line up the mark in the sheet’s upper-left corner with the alignment mark on the glass.
  3. Close the document cover slowly.
  4. Press the Black or Color button, and the printer scans the sheet and adjusts the print head position.

How to align the print head manually

Use this method when automatic alignment gives unsatisfactory results or keeps failing.

  1. Open the printer driver setup window and go to the Maintenance tab.
  2. Click Custom Settings, check Align heads manually, and click OK.
  3. Click OK on the confirmation message.
  4. On the Maintenance tab, click Print Head Alignment.
  5. Load the plain paper your manual calls for and click Align Print Head, with the printer on.
  6. For the first pattern, enter the number of the pattern with the least noticeable streaks in each box, then click OK.
  7. Click OK on the message, and the next pattern prints.
  8. Enter the best number for each remaining pattern, then click OK.

Canon says you can also click a pattern in the preview window to fill in its number.

How to choose when two patterns look alike

Canon gives a tie-breaker for the manual patterns on the pages we checked.

PatternIf you cannot decide, Canon says to pick
First patternThe one with the least noticeable vertical streaks
Second pattern (MG3600 series)The one with the least noticeable vertical streaks
Third pattern (MG3600 series)The one with the least noticeable horizontal stripes
TS5000 series second sheetThe least prominent horizontal stripes for the cyan sample or horizontal streaks for the black sample

The number of patterns and sheets depends on your series, so follow the on-screen messages.

Check the alignment you set

Open the Start Print Head Alignment dialog box and click Print Alignment Value to print the current settings.

Canon lists this check on its automatic and manual pages.

Cautions Canon lists during alignment

  • On the MG3600 series, do not open the paper output cover while printing is in progress.
  • On the TS5000 series, do not open the scanning unit or cover while the printer is printing.
  • On the MG7700 series, do not open the operation panel while printing is in progress.
  • If the printer is off or cannot reach the computer, the Custom Settings dialog can show an error, and clicking OK shows the settings last saved on your computer.

If the printer shows a print head error instead, see our guide to Canon print head errors 1401, 1403 and 1405.

If the printer is not responding on your computer, try the Canon printer offline fix.

Official Canon sources

Leave a Reply

Your email address will not be published. Required fields are marked *