How To Print Double-Sided On A Canon PIXMA Printer (2026)

Canon PIXMA printers print on both sides from a Duplex Printing check box on the Page Setup tab of the Windows printer driver.

Some models flip the paper by themselves, and others stop after the first side and ask you to reload the sheet.

This guide follows Canon’s PIXMA manuals for the Windows driver, including the paper limits that make the check box turn gray.

Quick answer: automatic or manual

ModePage Setup tab settingWhat happens
AutomaticDuplex Printing checked, Automatic checkedThe printer prints both sides without you reloading
ManualDuplex Printing checked, Automatic uncheckedOne side prints, then a message tells you to reload the paper

Canon’s MG3500 page covers both modes, while its MG3000 page lists only a Duplex Printing (Manual) check box.

Look at your own model’s manual if your Page Setup tab looks different from the one described here.

Paper and layout limits

Canon’s pages list conditions that must be true before the Duplex Printing option is available.

ConditionWhat Canon says
Media typePlain Paper only, and the option is grayed out for other media types
Paper size (MG3500 page)Letter 8.5 x 11 in or A4 only, chosen in Page Size on the Page Setup tab
Page layoutNot available with Tiling/Poster or Borderless on the MG3500 page
BookletDuplex Printing and Stapling Side are grayed out

Canon’s MG3000 page does not list paper sizes, so size limits depend on the model.

Steps for automatic duplex printing

  1. Open the printer driver setup window.
  2. On the Page Setup tab, check Duplex Printing and confirm that Automatic is checked.
  3. Select a layout from the Page Layout list: Normal-size, Fit-to-Page, Scaled or Page Layout.
  4. Click Print Area Setup if needed, choose normal-size printing or reduced printing, and click OK.
  5. Choose the Stapling Side, or accept the side the driver selects from your Orientation and Page Layout settings.
  6. Click OK on the Page Setup tab, then print.

Canon says duplex printing slightly narrows the print area, so a document may not fit on one page the way it does single-sided.

You can also click Specify Margin to set the margin width before you print.

Steps for manual duplex printing

  1. Open the printer driver setup window.
  2. On the Page Setup tab, check Duplex Printing and uncheck Automatic, or check Duplex Printing (Manual) on models that show that name.
  3. Select a layout from the Page Layout list.
  4. Choose the Stapling Side, and set a margin with Specify Margin if you want one.
  5. Click OK on the Page Setup tab, then print.
  6. When the message appears, reload the paper correctly as it instructs, then click Start Printing to print the other side.

Canon says the machine prints one side first and then displays that message.

Another place to find the setting

Canon says duplex printing can also be set under Additional Features on the Quick Setup tab.

Use whichever tab your driver shows, since both set the same option.

If Duplex Printing is grayed out

Work through the limits from Canon’s pages in this order.

  1. Set Media Type to Plain Paper on the Main tab.
  2. Set Page Size to Letter or A4 if your model’s page lists only those sizes.
  3. Change the Page Layout away from Tiling/Poster, Borderless or Booklet.

Canon says the option stays unavailable while any one of these is set.

Fix smudges on the back side

Canon says the machine pauses after the first side so the ink can dry before it prints the back.

Do not touch the paper during that pause.

If the back smudges, Canon says to run Bottom Plate Cleaning from the Maintenance tab, and its manual recommends running it before you do duplex printing.

Maintenance tab itemWhat Canon says
Bottom Plate CleaningCleans the bottom plate to prevent smudges on the back of the paper
Custom SettingsOpens a dialog with the Ink Drying Wait Time slider
Roller CleaningCleans the paper feed rollers when paper does not feed properly

Change the ink drying wait time

Click Custom Settings on the Maintenance tab to find the Ink Drying Wait Time slider.

Moving the slider right lengthens the pause, and moving it left shortens it.

Canon says to increase the wait if pages get stained because the next page is ejected before the ink dries, and that reducing it speeds up printing.

Poor results after new ink cartridges

Canon says automatic duplex results may be poor if you have not aligned the print head since loading or replacing an ink cartridge.

Its fix is to adjust the print head position from your computer.

The Print Head Alignment item is on the same Maintenance tab.

Everything on the Maintenance tab

Canon’s MG3600 manual lists the full set of Maintenance tab items, and your model may show fewer or more.

  • Cleaning, Deep Cleaning, Print Head Alignment and Nozzle Check.
  • Ink Cartridge Settings, Bottom Plate Cleaning and Roller Cleaning.
  • Power Off, Auto Power, Quiet Settings and Custom Settings.
  • View Print History, View Printer Status and About.

The items used in this guide are Print Head Alignment, Bottom Plate Cleaning, Custom Settings and Roller Cleaning.

If paper will not feed

Canon’s roller cleaning steps apply when paper particles stick to the rollers and paper is not feeding properly.

  1. Remove all paper from the front tray.
  2. On the Maintenance tab, click Roller Cleaning and confirm, with the machine turned on.
  3. Click OK to start, and wait for the rollers to stop.
  4. Load one sheet of plain paper or a cleaning sheet, then click OK to finish.

If the second side comes out streaky, see how to fix Canon printer streaks and blurry prints.

If Windows says the printer is unavailable, try Canon printer shows offline.

If the printer dropped off your network, see how to reconnect a Canon PIXMA printer to Wi-Fi.

Sources

Leave a Reply

Your email address will not be published. Required fields are marked *