How To Fix An Epson Printer With Clogged Nozzles (2026)

Faded colors, missing lines and white streaks on an Epson print usually mean some print head nozzles are blocked with dried ink.

Epson’s guides fix this with a fixed routine of a nozzle check, a head cleaning, and a rest period, not with endless repeat cleanings.

The steps below follow that routine and flag where it uses extra ink.

Quick answer: the Epson routine

StepActionSource detail
1Print a nozzle checkMaintenance > Print Head Nozzle Check on the XP-8700
2Run Cleaning if the pattern has gapsPattern B or close to B
3Repeat check and cleaningUp to 3 rounds
4Stop and rest the printerAt least 12 hours without printing
5Try again, then Power CleaningUses more ink than normal cleaning
6Contact Epson supportIf quality still does not improve

Print a nozzle check first

On Epson’s XP-8700 guide, you start by selecting Maintenance on the control panel, then Print Head Nozzle Check.

Follow the on-screen prompts to load paper and print the pattern.

You can also run it from the driver, and on Windows that is the Nozzle Check button on the Maintenance tab.

On a Mac, go to the Apple menu > System Preferences > Printers & Scanners, pick your Epson, then Options & Supplies > Utility > Open Printer Utility > Nozzle Check.

Read the nozzle check pattern

What printsMeaningNext step
Pattern A: all lines printThe print head is fineNo cleaning needed
Pattern B or close to itSome nozzles are cloggedSelect Cleaning
Pattern C or close to itMost nozzles are cloggedSelect Power Cleaning

Menu wording and the exact pattern layout vary by model, so follow your own printer’s screen.

Run a head cleaning

After you choose Cleaning, follow the on-screen instructions.

When the cleaning ends, Epson’s XP-8700 guide says the nozzle check pattern prints automatically.

Repeat the cleaning and check until every line prints completely.

What not to do during cleaning

  • Do not open the scanner unit while the head is cleaning.
  • Do not turn the printer off mid-cycle, because an incomplete cleaning may prevent printing.
  • Do not run cleaning more than necessary, because it uses ink.

Epson also says that if ink is low, you may not be able to clean the print head at all.

Stop after three rounds and wait

If print quality has not improved after 3 rounds of nozzle check and head cleaning, Epson says to stop.

Leave the printer without printing for at least 12 hours.

The guide recommends turning it off with the power button during that wait.

After the wait, run the nozzle check again and clean the head again if the pattern still has gaps.

Use Power Cleaning as the last step

Epson’s guide says Power Cleaning is for when most nozzles are clogged, or when quality has not improved after the three rounds and the 12-hour wait.

It also warns that Power Cleaning uses more ink than normal head cleaning.

  1. On the control panel, select Maintenance.
  2. Select Power Cleaning.
  3. Follow the on-screen instructions.
  4. Run a nozzle check afterward to confirm the nozzles are clear.

On Windows, the driver route is Maintenance tab > Head Cleaning > Power Cleaning.

If quality still does not improve, wait another 12 hours without printing and repeat the check, then contact Epson support.

If the nozzle check pattern will not print right

Epson’s troubleshooting page for a bad pattern lists a few extra causes.

CauseWhat Epson says
Printer unused for a long timeNozzles may have dried and clogged; turn the printer on at least once every two weeks
Lint on the platenCheck near the print head and clean it with the maintenance kit
Still clogged after strongest cleaningTurn the product off and leave it overnight, then check again

If lines remain after the nozzles are clear

White or dark bands can come from settings and alignment as well.

Epson’s banding pages say to match the paper type setting to the paper you loaded.

They also say to turn off high-speed options in the software and to adjust print quality settings.

If bands remain after cleaning and aligning the print head, the ET-16650 page says to adjust the horizontal or vertical alignment in the Maintenance menu.

That same page says to check the ink levels visually and refill if needed on ink tank models.

Epson’s XP-4200 page also says to load the paper correctly and to wipe dust or dirt off any original you are copying.

If you see vertical banding or smeared paper, the same page says to clean the paper path.

Keep the nozzles from drying out

Epson gives two habits that protect the print head.

  • Turn the printer on at least once every two weeks, because nozzles can dry out when it sits unused.
  • Turn it off with the power button, and do not unplug it while the power is on, because that can dry out the print head.

The ET-16650 page also cautions that Power Cleaning consumes a lot of ink, and says to use it only if the product has been unused for a long time and normal cleaning did not help.

Cleaning and the ink pad warning

Every cleaning sends ink into the printer’s waste system, which is part of why Epson says not to overdo it.

If your printer eventually stops with a service-life message, see our guide to the Epson ink pad end of service life error.

When to contact Epson support

If the pattern is still broken after the 12-hour rest and a Power Cleaning, Epson’s guide says to contact Epson support.

Its pattern troubleshooting page says the same when nozzles stay clogged after an overnight rest.

If the printer is not responding to print jobs at all, read our guide to Epson printers that show offline first.

Official Epson sources

Leave a Reply

Your email address will not be published. Required fields are marked *