How To Fix A Canon PIXMA Paper Jam Error 1300 Or 1303 (2026)
A Canon PIXMA paper jam shows up as a support code, and the code tells you where the paper is stuck.
Canon’s manuals list 1300, 1303, 1304 and 1313 as the main jam codes, each with its own removal steps.
This guide matches each code to the right place to look and walks through the steps Canon gives for the two most common ones.
Quick answer: pick your jam code
| Support code | Where the paper is stuck |
|---|---|
| 1300 | Paper output slot or rear tray, and you can see the paper |
| 1303 | Jammed while feeding from the cassette, and you cannot see it at the output slot or rear tray |
| 1304 | Jammed during automatic two-sided printing |
| 1313 | The printer pulled in printed paper and it jammed |
| Paper Is Jammed inside Printer | The paper tore, or it is stuck inside the printer |
| 2801 | An original is jammed in the automatic document feeder |
These meanings come from the paper jam list on Canon’s PIXMA TS6300 and Inkjet TR8600 manuals.
What the display or lamps show
On the TS3700 series, Canon’s table shows E03 on the printer display for code 1300 and for code 1203.
| Display code | Support code | Canon’s cause |
|---|---|---|
| E03 | 1203 | Cover open |
| E03 | 1300 | Paper jammed from the rear tray |
On printers without a display, Canon says the Alarm lamp lights, or the ON and Alarm lamps flash alternately.
On a Windows computer, a message with the support code can also appear on screen.
Fix code 1300: paper in the output slot or rear tray
Canon’s steps for 1300 on the TS3300 and G3000 series are the same in outline.
- Pull the jammed paper out slowly, from either the paper output slot or the rear tray, whichever is easier.
- Hold the paper with both hands so it does not tear.
- If it will not come out, turn the printer back on, because the paper may eject automatically.
- If you must turn the printer off during printing, press the Stop button first.
- If the paper tears and you cannot reach the rest from the slot or the tray, remove it from inside the printer.
Canon says to press Stop first whenever you have to switch the printer off during printing.
Resume printing after code 1300
Once the paper is out, load fresh paper and press the button Canon names for your model.
| Series | Button after clearing 1300 |
|---|---|
| PIXMA TS3300 | OK |
| PIXMA G3000 | Black or Color |
The printer then resumes, and you should reprint any page that did not come out correctly.
If you turned the printer off while clearing the jam, Canon says the print data was erased and you need to send the job again.
Fix code 1303: paper jammed feeding from the cassette
This code applies to printers with a front paper cassette, and Canon’s TS6100 page gives the order to check.
- Look at the paper output slot first, and follow the code 1300 steps if paper is visible there.
- Check inside the printer next, using Canon’s “Paper Is Jammed inside Printer” steps.
- Pull out the cassette and remove the paper slowly with both hands.
- If none of those shows the paper, open the rear cover using Canon’s “Removing Jammed Paper from Rear Side” steps and remove it there.
- Load the paper correctly in the cassette, and for A4 or Letter paper, extend the cassette first.
- Try printing or copying again.
On the TS8300 series, Canon adds that you should store the paper output tray and the paper output support before pulling out the cassette.
That model also asks you to select OK on the touch screen when you are done.
Fix code 1304: jam during two-sided printing
For 1304, Canon’s TS6000 page says to check the output slot and the inside of the printer first, as for the other codes.
If the paper is still not out, the steps move to the back of the printer.
- Turn the printer so the rear side faces you.
- Open the rear tray cover and pull up the paper support.
- Pull out the rear cover.
- Slowly pull out the paper without touching the printer’s inner parts.
- If the paper is still stuck, lift the transport unit cover and pull it out, then slowly remove the paper.
- Insert the transport unit cover slowly all the way back in.
- Reattach the rear cover by inserting the projections on its right side first, then pushing the left side until it closes.
Canon’s note says to press the Stop button first if you have to turn the printer off during printing.
What Canon says helps prevent jams
Canon’s 1300 pages give two practical rules.
- Use suitable paper and load it correctly.
- For documents with photos or graphics, use a paper size other than A5, because A5 can curl and jam as it leaves the printer.
If you print on both sides often, see our guide to printing double-sided on a Canon PIXMA.
If the jam message stays after the paper is out
Canon’s pages say that if the steps do not solve the problem, you should contact your nearest Canon service center for repair.
Before you do, make sure no torn pieces remain at the output slot, in the rear tray, in the cassette or at the rear cover.
Our Canon printer errors 5100, 5B00 and B202 guide covers the nearby printer errors if the code on your screen is different.
Paper jam guides for other brands
Epson owners can follow our Epson paper jam or not feeding guide.
Brother laser owners can use our Brother paper jam guide.