How To Fix Canon Printer Errors 5100, 5B00 And B202 (2026)
A Canon PIXMA printer that stops with a code such as 5100, 5B00 or B202 is telling you which kind of fault it has found.
Canon says the support code is the error number, and that the right action depends entirely on which code you see.
This guide sorts the codes Canon documents into the ones you can fix yourself and the ones that need a service center.
Quick answer: what each code means
| Support code | Canon’s guidance | Fix at home? |
|---|---|---|
| 5100, 5102 to 5105, C000 | Clear anything blocking the print head holder and reseat the ink tanks | Often yes |
| 5B00, 5B01 | Ink absorber is full or a printer error, so contact the service center | No |
| B202, B203, B204 | Turn off, unplug, and contact the service center | No |
| 1700, 1701 | Ink absorber almost full, so continue printing and contact the service center | No |
| 5011, 5012, 5200, 5400, 6000 and similar | Power off, unplug, plug in and power on again | Yes |
| 2500 | Automatic print head alignment failed | Yes |
Find the support code first
Canon says the code appears on the printer’s screen and on the computer screen together with an error message.
Write it down exactly, because 5100 and 5B00 look similar but need very different actions.
Canon’s pages differ slightly between PIXMA series, so check the page for your own series if the code is not listed here.
Error 5100 or C000: print head holder cannot move
Canon’s page for 5100 gives no specific cause beyond a printer error, but the actions point to something blocking the carriage.
- Cancel printing and turn off the printer.
- Check for anything stopping the print head holder from moving, such as protective material or jammed paper, and remove it.
- Push each ink tank in until it clicks into place.
- Turn the printer back on.
- If the error returns, contact the service center.
While you clear a jam, avoid touching the clear film or the white belt, because paper or your hands can smudge or scratch them and damage the printer.
Do not force the print head holder or touch it while it is moving.
Error 5B00: the ink absorber is full
For the TS3700 series, Canon says the ink absorber collects ink from cleaning and other maintenance, and that the printer cannot print once it is full.
Canon’s page offers no user steps for replacing it, so the action is a repair.
| What you need to do | What Canon says |
|---|---|
| Print or copy | The ink absorber must be replaced, so contact Canon for repair as soon as possible |
| Scan (TS9500 series page) | Press Stop on the printer to scan from it, or scan from a computer, smartphone or tablet using the matching app |
Canon notes that warnings caused by remaining ink levels also prevent printing and scanning.
Warnings 1700 and 1701: absorber almost full
These are the early warning for the same part.
Canon says to press OK to continue printing, and then contact the service center.
Treat them as a prompt to book a repair before the printer stops with 5B00.
Errors B202, B203 and B204
Canon lists these as errors that need service.
It says to turn off the printer, unplug the power cord, and contact the service center.
There is no user fix listed for them.
Codes that a power cycle can clear
For a long list of printer errors, including 5011, 5012, 5200, 5400, 6000 and many in the 6500 to 6946 range, Canon’s action is the same.
- Turn the printer off.
- Unplug the power cord, and wait a moment.
- Plug it back in.
- Turn the printer on.
Canon warns that unplugging the power cord deletes all faxes stored in the printer’s memory, so print any you need first if the printer can still do so.
For codes 6001 and 6003, Canon adds that you should open the paper output tray if it is closed before you power off.
Code 6910 on a network printer
This one is a network error rather than a hardware fault.
- Turn off other network devices for a while.
- Set IPv6 to Inactive under Setup, Device settings, LAN settings, Other settings, TCP/IP settings, IPv6.
- Move the printer to a different location.
If it continues, contact the service center.
Code 2500: alignment failed
Canon says the automatic print head alignment failed.
- Press OK.
- Print a nozzle check pattern.
- Load plain A4 or Letter paper and run the alignment again.
- Keep strong light away from the paper output slot.
If it still fails, Canon says to perform manual print head alignment.
Ink tank codes you may see alongside these
| Code | Meaning | Canon’s action |
|---|---|---|
| 1660 | Ink tank not installed | Install the tank |
| 1680, 1681 | Tanks in the wrong positions | Put each tank in its correct position |
| 1688 | Ink has run out | Replace the tank and close the panel |
| 1754 | Tank not installed properly | Open the cover, push the tank in, close the cover, and contact the service center if it continues |
| 1755 | Ink has run out and printing cannot continue | Cancel printing and replace the tank |
| 5500, 5501 | Ink tank not recognized | Contact the service center |
Canon cautions that overriding ink-level detection is not recommended, because printing with an empty tank may damage the printer.
When to contact the service center
Canon’s own pages send you to a service center for 5B00, 5B01, B202, B203, B204, 1700 and 1701, and for 5100 when clearing the carriage does not help.
Canon also says to contact service for 1401, 1403 and 1405, where the print head may be damaged, and for 5500 and 5501.
Before you call, note the exact support code and the printer series, because Canon’s guidance is organized by both.
Handling rules Canon repeats on its code pages
- Do not remove an ink tank until you have a replacement ready, because Canon says the printer will not operate after removal, even if you reinstall the same tank.
- Do not leave a removed tank lying open, and use each new tank within six months of first use.
- Do not print with the ink out, since Canon says it may damage the printer.
- Dispose of empty tanks according to local regulations.
These rules come from Canon’s New Zealand support page, and the codes themselves can differ slightly by series.
Related guides
If streaks or blank pages are the problem rather than an error code, see our Canon streaks guide once it is live, or our guide to printing with only colour ink.
If the printer only shows Offline, use our Canon printer offline guide.