How To Fix Logi Options+ Not Detecting Your Device (2026)
Logi Options+ can open normally and still show an empty home screen with no mouse, keyboard or webcam in it.
That usually means the computer is not seeing the device properly, or the app is missing a permission it needs.
The steps below follow Logitech’s own support pages and go from the quickest checks to the Windows and Mac settings that cause most of these cases.
Quick answer: what to try first
| What you see | Try this first |
|---|---|
| Device missing in Options+ on any computer | Update Options+, then unplug the USB receiver, wait 10 seconds and plug it back in |
| Receiver is in a USB hub, dock or KVM switch | Move the receiver to a port directly on the computer |
| Device connects, then drops out at intervals on Windows | Turn off USB power saving in Device Manager and Power Options |
| Mac never showed the receiver prompt, or you clicked Ignore | Set Allow accessories to connect to ask, then replug the receiver and click Allow |
| Mac cannot see a Bluetooth device that is not connected | Turn on Logi Options+ under Privacy & Security > Bluetooth |
| Still nothing after all of this | Test the device on a second computer |
Check that your computer sees the device
Options+ can only list hardware that the operating system already detects, so confirm that first.
For a mouse, the pointer should move on the desktop, and for a keyboard you should be able to type.
On Windows, open Device Manager and look for your product, because an error or unrecognized device is usually marked with a yellow exclamation mark.
On a Mac, click the Apple menu, choose About This Mac, open System Report, select the Hardware section and click USB to see the USB device tree.
Run the basic checks from Logitech
Logitech’s page for a device that is not detected in Options+ lists seven checks, and they fix a surprising number of cases.
- Install the latest version of Options+ and check the release notes for your device.
- Make sure cables, connectors and power sources are secure.
- Unplug the USB receiver, wait 10 seconds, then plug it back in.
- Try a different USB port, or connect the device directly to the computer.
- Test the device on another computer to see whether the device or the computer is at fault.
- Check that the device has enough power and look at its indicator lights.
- Update the operating system, the software and the device firmware.
Plug the receiver straight into the computer
Logitech says the receiver must be plugged directly into the computer, not into a USB hub or an unsupported device such as a KVM switch.
If the receiver is on a hub or extender, move it to a port on the computer itself and let Options+ rescan.
On Windows, also try a different port, and if that helps, Logitech suggests updating the motherboard USB chipset driver.
Our guide to USB ports not working in Windows 11 covers a port that stays dead for every device.
Rule out power and radio interference
| Likely cause | What to do |
|---|---|
| Low battery | Replace the batteries or charge the device, and make sure it is switched on |
| Receiver in a hub or KVM switch | Plug it into the computer directly |
| Keyboard used on a metal surface | Move the keyboard to a non-metal surface |
| Interference from wireless speakers or cell phones | Keep other wireless electronics away from the receiver |
| Device too far from the receiver | Move the device closer to the USB receiver |
| Windows USB port power settings | Change the power settings described in the next section |
Stop Windows from powering down the USB port
Logitech blames Windows power management when a device disconnects or stops responding at regular intervals, and it gives two parts to the fix.
First, change the USB controller setting:
- Click Start, type device manager and open Device Manager.
- Expand Universal Serial Bus controllers.
- Right-click USB Root Hub and choose Properties.
- Open the Power Management tab.
- Clear the box named Allow the computer to turn off this device to save power.
Windows reverses that change after a restart, so Logitech adds a second part to make it stick:
- Click Start, type power options and open Power Options.
- Click Change plan settings for your current plan, then Change advanced power settings.
- Expand USB settings, then USB selective suspend setting.
- On a laptop, set On battery to Disabled.
- Set Plugged in to Disabled and click OK.
If the device keeps dropping after this, see USB devices that keep disconnecting in Windows 11.
Unpair and pair the device again
A receiver with the Unifying logo can be unpaired and paired again by following Logitech’s article on unpairing a mouse or keyboard from the Unifying receiver.
A receiver without that logo cannot be unpaired, so Logitech says a replacement receiver has to be paired with the Connection Utility software.
If the mouse or keyboard is also paired to your laptop over Bluetooth, Logitech says that can stop the Unifying software from finding it, so remove that Bluetooth pairing first.
For the newer Bolt receiver, use our Logi Bolt receiver guide instead.
On a Mac, allow the receiver when asked
Newer versions of macOS ask you to approve USB and Thunderbolt accessories plugged into a USB-C port, and a Logi receiver triggers that pop-up.
Click Allow, because Logitech says that is what lets devices on the receiver work and be detected.
If you clicked Ignore, or the receiver was never detected, do this:
- Unplug the receiver.
- Open System Settings > Privacy & Security.
- Scroll down to the dropdown next to Allow accessories to connect and choose the option that asks every time (the menu names it Ask every time or Always ask, depending on your macOS version).
- Plug the receiver back in.
- Click Allow when the prompt appears.
Give Options+ its Mac permissions
Logitech lists several macOS permissions that Options+ needs, and the two that affect detection most are Bluetooth and Login Items.
| Setting | Where to find it | Why Options+ needs it |
|---|---|---|
| Bluetooth | System Settings > Privacy & Security > Bluetooth | Detects Bluetooth devices that are not connected right now, and is needed to Flow to that computer |
| Login Items | System Settings > General > Login items | Runs the background processes that detect devices; if disabled, Options+ can stay on the loading screen |
| Accessibility | System Settings > Privacy & Security > Accessibility | Scrolling, back and forward, gestures, volume and zoom |
| Input Monitoring | System Settings > Privacy & Security > Input Monitoring | Scrolling, back and forward, and gestures |
After you enable Bluetooth or Input Monitoring, click Quit & Reopen when macOS prompts you.
Bluetooth devices that will not pair at all are a different problem, which our Logitech Bluetooth guide and Mac Bluetooth guide cover.
Do not rely on the old Logitech apps
Logitech has ended support for Logitech Options, Unifying Software, SetPoint, Logitech Connection Utility, the Firmware Update Tool, Logitech Preference Manager and Logitech Control Center.
It recommends Logi Options+ for supported devices, so an old app that no longer sees your mouse is not a reliable test.
When to contact Logitech
If the device is not recognized on a second computer either, Logitech says the fault is most likely the USB receiver rather than the mouse or keyboard, so contact support.
Logitech’s support pages link to a Warranty FAQ and a File a Warranty Claim option, and they offer a Contact Us request form.