How To Fix Bluetooth Not Connecting On A Mac (2026)

Your Bluetooth mouse, keyboard or headphones will not connect to your Mac, or they connect and then drop off.

The cause is usually a switched-off device, a flat battery, a stale pairing or radio interference, and all of those are fixable.

The steps below follow Apple’s own guidance and take about 10 minutes.

Quick answer: match your symptom to a fix

SymptomTry this firstWhere
Device missing from the listTurn it off and on, then make it discoverableThe device
Bluetooth will not turn onRestart the Mac and try againSystem Settings > Bluetooth
Magic Mouse or Keyboard will not pairConnect it with a cable for 1 minuteMac USB-C port
Headphones paired but silentSelect them as the output deviceSystem Settings > Sound
Keeps dropping or skippingReduce wireless interferenceAround your desk and router
Stuck on a bad pairingForget the device and pair it againControl-click it in the Bluetooth list

Step 1: Make sure Bluetooth is on

Use your laptop’s built-in trackpad or a USB mouse for this step.

  1. Click the Apple menu and choose System Settings.
  2. Click Bluetooth in the sidebar (scroll down if you do not see it).
  3. Make sure Bluetooth is turned on.

If Bluetooth still will not turn on, restart your Mac and try again.

What if my Bluetooth keyboard works but I have no mouse?

Apple has a keyboard-only way to switch Bluetooth on.

  1. Press Command-Space bar to open Spotlight.
  2. Type Bluetooth File Exchange and press Return.
  3. Press Return again to turn Bluetooth on.

Step 2: Turn the device off and on

A quick power cycle clears many failed connections.

  • Magic Mouse: slide the switch on the bottom until no green shows, then slide it back to show green.
  • Magic Keyboard and Magic Trackpad: slide the switch on the back edge the same way.
  • Earlier Apple Wireless Keyboard and Magic Trackpad: hold the power button on the right side until the green LED turns off, then press it again until the LED lights.

For any other brand, use the power switch or button described in its manual.

Step 3: Check the battery

A device with a weak battery may refuse to connect or keep dropping.

Charge it or fit fresh batteries before you try anything else.

Earlier Apple Wireless models do not charge over a Lightning cable and use replaceable batteries, so fit new ones if the device will not pair.

To check the charge level of an Apple accessory, click the Control Center icon in the menu bar, then click Bluetooth.

Step 4: Pair a Magic accessory with a cable

Apple’s fix for a Magic Keyboard, Magic Mouse or Magic Trackpad that will not connect is to use a cable.

  1. Connect the accessory to your Mac with a Lightning to USB cable, a USB-C to Lightning cable or a USB-C to USB-C cable.
  2. Make sure the device’s power switch shows green.
  3. Wait 1 minute.
  4. Wait for the notification that you can disconnect the cable and use it wirelessly.

This pairs the accessory with your Mac and charges its built-in battery.

You need to unplug a Magic Mouse to use it, while a Magic Keyboard or Trackpad can stay plugged in.

Step 5: Pair any other Bluetooth device

For third-party mice, keyboards and headphones, follow these steps.

  1. Turn the device on and make it discoverable, using the device’s own documentation.
  2. Open Apple menu > System Settings and click Bluetooth.
  3. Hover over the device in the list and click Connect.
  4. If prompted, click Accept, or type the number sequence shown and press Return.

You can also pick the device from the Bluetooth icon in Control Center.

Step 6: Choose the headphones for sound

Bluetooth headphones can be connected yet silent if your Mac is still sending sound elsewhere.

  1. Open System Settings and click Sound in the sidebar.
  2. Click Output for headphones or speakers, or Input for a microphone or headset.
  3. Select your device in the list.

Apple also says to check that the headset is turned on, in range and charged.

Step 7: Forget the device and pair it again

If a device keeps failing, remove the old pairing.

  1. Open System Settings > Bluetooth.
  2. Control-click the device’s name in the list and choose Forget.
  3. Put the device back in pairing mode and connect it as in Step 5.

After you forget a device you must pair it again before you can use it.

Why does Bluetooth keep dropping or skipping?

Apple says interference can make devices fail to connect, drop off, skip audio, buzz or move a pointer erratically.

Common interference sourceWhat Apple suggests
Power cables, microwave ovens, fluorescent lightsDo not use wireless devices right next to them
Wireless video cameras, cordless phonesKeep them away from your Mac and Bluetooth devices
USB 3 and Thunderbolt 3 devices, including hubsUse shielded cables, move them away from the Mac and turn off USB 3 devices you are not using
Crowded 2.4 GHz bandMove compatible Wi-Fi devices to 5 GHz on a dual-band router, or change the router channel

Keep your paired Bluetooth devices close to each other and to the Mac.

Do walls and desks matter?

Physical obstructions weaken wireless signals, and metal has the highest impact.

MaterialInterference potential
Wood, glass, many synthetic materialsLow
Water, brick, marbleMedium
Plaster, concrete, bulletproof glassHigh
MetalVery high

For example, a metal surface between a Bluetooth mouse and the computer can degrade the mouse’s performance.

AirPods are the most common Bluetooth headphones on Macs, so see how to fix AirPods not connecting to iPhone or Mac.

For a Logitech mouse or keyboard, read fixing Logitech Bluetooth not connecting.

If Wi-Fi is also acting up, try fixing Wi-Fi not working on a Mac.

Official sources

Leave a Reply

Your email address will not be published. Required fields are marked *