How To Fix An LG TV With No Sound (2026)
An LG TV with a good picture but no sound is usually sending audio to the wrong place or being muted by a connected box.
LG’s support pages treat it as a settings problem first, and most of the fixes take a minute.
This guide follows LG’s order, from the volume bar to the built-in sound test.
Quick answer: which fix matches your symptom
| Symptom | Likely cause | Fix |
|---|---|---|
| Volume bar does not appear when you press volume | Sound is routed to an external speaker | Set Sound Out to the TV speaker |
| Volume bar appears but nothing plays | Source, cable or TV audio fault | Run the sound self-diagnosis test |
| No sound on one cable box only | Set-top box muted, at 0 or in error | Raise volume with the box remote, then power cycle it |
| TV shows No Signal | Box is off or has a program error | Switch the box off, wait about 5 seconds, switch it on |
Why does an LG TV lose sound?
LG lists three common causes for no sound.
- Output still set to an external speaker after a soundbar was disconnected.
- A muted or zero-volume external device, such as a set-top box.
- A hardware problem in the TV.
The first two are settings problems you can fix yourself.
Step 1: check the volume on the TV and the box
- If the TV volume is at 0 or muted, raise it and test again.
- If you use a set-top box, raise the volume with its own remote.
- A set-top box program error can remove sound even while the picture plays.
Start here because LG lists a muted or zero-volume external device as one of its three causes.
It takes seconds and avoids changing any TV settings.
Step 2: change Sound Out to the TV speaker
If the volume bar does not appear on screen, LG says the output is probably set to an external speaker.
- Press Settings on the remote and open All Settings.
- Go to Sound, then Sound Out.
- Choose the TV speaker if it is not already selected.
- Press volume up and check the sound.
Step 3: reseat the HDMI cable and power cycle
LG’s steps for an external device are short and in a fixed order.
- Adjust the volume with both the TV remote and the device remote.
- Unplug both ends of the HDMI cable and reconnect them.
- Try a different HDMI cable.
- Unplug the power cords of the TV and the device, then plug them back in.
Step 4: run the built-in sound self-diagnosis
LG says to check your webOS version first by pressing the Settings gear or Mute three times in a row.
| TV | webOS version | Path to the sound test |
|---|---|---|
| 2024 or later OLED | webOS 24 or later | Settings > All Settings > Support > Sound Self-Diagnosis |
| 2021 to 2023 OLED | webOS 6.0 to 23 | Settings > All Settings > General > OLED Care > Device Self-Care > Sound Self-Diagnosis |
| 2021 or later (other TVs) | webOS 6.0 or later | Settings > All Settings > Support > Sound Self-Diagnosis |
| 2020 | webOS 5.0 | Settings > All Settings > Support > Additional Settings > Sound Test |
| 2019 or earlier | webOS 4.5 or earlier | Settings > All Settings > Sound > Sound Test |
The test plays a sound through the TV speakers on its own, so it separates a TV fault from a source fault.
LG says a normal test sound means the set-top box is the likely culprit.
What does the sound test result mean?
| Test result | What it means | Next step |
|---|---|---|
| Test sound plays | The TV speakers work and the problem is the source | Power cycle the set-top box, then contact your provider if there is still no sound |
| No test sound at all | The problem is in the TV | Contact LG customer support |
No sound on a cable or satellite box only
If the test sound plays but the box has no sound, LG says the TV is working.
Switch the box off, wait about five seconds, and switch it back on.
If a No Signal message shows even though the box is on, the same power cycle applies.
What does the volume indicator tell you?
LG uses the volume bar to split the problem into two branches.
| Volume bar on screen? | What it suggests | Where to go |
|---|---|---|
| No bar appears | The TV is sending sound to an external speaker | Step 2, Sound Out |
| Bar appears and moves | The TV accepts the volume change | Step 4, sound self-diagnosis |
No sound after changing channel or input
LG has a separate guide for sound that vanishes after you switch inputs or channels.
It names the same causes: an audio setting pointed at a different source, an external speaker set as the output, or a set-top box error.
- If the volume display does not change, set Sound Out to the TV speaker.
- If the volume controls work but nothing plays, run the sound test.
- If the test sound plays normally, contact the set-top box provider.
What if you removed a soundbar or speaker?
This is the most common trap, because the TV keeps sending audio to the old output.
LG lists audio still routed to an external speaker after it was disconnected as a cause on its sound page.
Open Sound Out and switch back to the TV speaker, then raise the volume to confirm.
How do you check your webOS version?
- Press the Settings (gear) button on the remote, or press Mute three times in a row.
- Read the webOS version shown on screen.
- Match it to the table in step 4 to find the right sound test path.
LG says its page content may differ from your model, so the menu names can vary slightly.
Still no sound after the checks?
A TV that fails the sound test may have a hardware fault, so use LG’s support options.
| Option | What LG lists |
|---|---|
| LG Chatbot | On the LG website |
| Technician visit | Request a repair online |
| Warranty note | A service fee may apply if the product is out of warranty |
Related LG TV fixes
- How to hard reset your LG TV if settings changes do not help.
- How to fix an LG TV that is frozen if the TV stops responding to the remote.
- How to clear the cache on an LG TV for slow apps.
- How to fix an LG TV that will not turn on if the TV will not start at all.
Steps come from LG’s what to check if your LG TV has no sound and OLED TV no sound guides.