How To Fix Sony TV No Sound Or Low Volume (2026)
A Sony TV with no sound or very low volume is usually a setting, a cable or a stuck TV rather than a dead speaker.
Sony has a support article for exactly this problem, and it works through the checks in a fixed order.
This guide follows that order, so you can stop as soon as the sound comes back.
Quick answer: what to check first
| Check | Where | What you want to see |
|---|---|---|
| Volume and mute | Remote or TV | Volume raised and the mute icon off |
| Speaker output | Display & Sound → Audio Out → Speakers, or Sound → Speakers | TV Speakers selected |
| Headphone jack | 3.5mm port on the TV | Nothing plugged in |
| Source device | Cables and the other device | Firmly seated, and sound on another source |
| Audio settings | Sound menu | Advanced auto volume off, Surround off |
| Restart and update | Power button and system update | TV restarted and software current |
Check volume and mute first
Raise the volume on the remote and make sure the TV is not muted.
This sounds too simple, but Sony lists it as step one for a reason.
If the volume bar moves and you still hear nothing, move on to the output setting.
Make sure the TV speakers are the output
If the TV is sending sound somewhere else, the built-in speakers stay silent.
Sony says to set the output to the internal speakers, and the menu path depends on the model.
- Open the TV settings.
- Go to Display & Sound, then Audio Out, then Speakers, and choose TV Speakers.
- On models with a different layout, go to Sound, then Speakers, and choose TV Speakers.
Sony says this setting covers speakers that are disabled, set as a center channel speaker or routed to a stereo system.
Unplug anything from the headphone jack
Sony tells owners to remove any headphones from the 3.5mm jack.
If your TV has a headphone or audio-out setting, set it to Audio-Out so the internal speakers stay active.
A cable left in that jack is an easy thing to forget about.
Check the cables and the source device
Make sure the audio and video cables from your set-top box, DVD player or other device are firmly in the correct ports on the TV.
Then try a different device or a different streaming app to see whether the problem is the TV or one source.
If only one input has no sound, Sony says to power cycle that set-top box.
Adjust the audio settings
Two sound features can make the TV seem quiet or strange, and Sony suggests turning both off while you test.
| Setting | Menu path | Sony suggestion |
|---|---|---|
| Advanced auto volume | Sound → Advanced auto volume | Off |
| Surround | Sound → Sound customisation → Surround | Off |
| Volume offset | Settings → Display & Sound → Sound → Volume level → Volume offset | Raise to the maximum, if your TV has it |
Not every model shows every item, so skip any entry your TV does not have.
Restart the TV and run a power reset
Sony recommends a power reset for Google TV and Android TV models, and it has a separate guide for them.
Its restart guide describes the remote method first.
- If a USB hard drive is connected, unplug it from the TV.
- Point the remote at the TV and hold the POWER button for about 5 seconds until a Power off message appears.
- If a Cancel or Restart screen appears after a few seconds, choose Restart.
- Wait about one minute for the TV to start again.
If that does not help, Sony describes a power reset by unplugging the TV.
- Turn off the TV and unplug the power cord from the wall outlet.
- Press the TV power button once and release it.
- Leave the TV unplugged for 2 minutes, then plug it back in.
Sony notes that on some Google TV models, holding the TV power button for about 40 seconds has the same effect.
Update the software, then factory reset only if needed
Sony lists a software update as the next step after the reset.
Its update guide says to open Quick Settings, go to Settings, then System, then About, then System software update, on Google TV models.
A factory reset is the last step in Sony’s list, so back up anything you care about first because it returns the TV to its original state.
If only one setup has no sound
Sony’s TV audio index shows that some no-audio cases have their own articles.
| Your setup | Sony article topic |
|---|---|
| Soundbar on HDMI ARC with Control for HDMI off | No sound from a soundbar connected via HDMI (ARC) |
| AV receiver or soundbar on ARC or eARC | No sound with ARC or eARC |
| Optical audio cable | No sound through the DIGITAL AUDIO (OPTICAL) OUT jack |
| Muffled or unclear voices | Unclear dialogue or distorted sound |
If your sound is distorted rather than missing, read our guide to Sony TV distorted sound quality.
If you use a soundbar, receiver or Bluetooth
Sony’s TV audio index also has separate articles for people who send sound to other equipment.
If the TV is set to output sound to an outside device, the built-in speakers may be silent by design.
| What you want to do | Sony article topic |
|---|---|
| Connect a soundbar | How to connect a Sound Bar to the TV |
| Hear TV sound through a stereo receiver or home theater system | How to hear TV sound through a stereo receiver or home theater system |
| Use Bluetooth audio on Google TV | Can I use Bluetooth audio devices with an Android TV or Google TV |
| Get sound from headphones and TV speakers together | How to get sound from headphones and the TV speakers at the same time |
| Understand fixed and variable output | The difference between FIXED and VARIABLE audio output |
Search for those titles on Sony’s support site if one matches your setup.
If you changed the audio output recently, undoing that change is the fastest test.
Related Sony TV problems
If you hear sound but the screen stays dark, see Sony TV with sound but no picture.
If the TV locks up while you troubleshoot, how to fix a frozen Sony TV covers that.
A TV that cuts out on its own may be the issue in Sony TV turns on then off.
When to contact Sony support
If the TV is still silent after the reset, the update and a factory reset, Sony’s article points owners to its support contact page.
Tell the agent which input has no sound, which steps you tried and whether the problem happens on every source.