How To Fix An LG TV That Won’t Turn On (2026)
An LG TV that will not turn on is usually a power cord, outlet or remote problem before it is a hardware failure.
LG’s own support pages start with the standby light and the power cord, so that is where this guide starts too.
Work down the steps in order and stop as soon as the TV comes on.
Quick answer: what to try first
| What you see | Likely cause | First move |
|---|---|---|
| Standby light on, TV ignores the remote | Remote or remote sensor | Press the power button on the TV itself |
| Standby light off | No power at the cord, outlet or breaker | Reseat the cord and test the outlet |
| Sound but no picture | Screen, input or service issue | Press Volume and look for the volume bar |
| TV has power but no standby light | Power Indicator setting is off | Turn on Power Indicator in the TV settings |
Where is the standby light and what should it do?
In standby mode, the light on the lower edge of the screen should be on.
If it is off, LG tells you to check the power cord connection first.
LG also says a TV that has power but a dark standby light may simply have Power Indicator switched off in its settings.
The menu path for that setting varies by model, so check your user manual if you cannot find it.
Step 1: reseat the power cord
- Unplug the cord from the back of the TV.
- Unplug it from the wall outlet.
- Plug both ends back in securely.
If your TV has a built-in cord, unplug and reconnect it at the wall outlet only.
Step 2: test the outlet and the breaker
Plug another device into the same outlet to see whether it has power.
LG’s guide suggests a small appliance such as a hair dryer for this test.
| Outlet test result | What it means | Next step |
|---|---|---|
| Other device works | The outlet is fine | Go to step 3 |
| Other device does not work | No power at the outlet | Check the circuit breaker and reset it if it tripped |
| TV is on an energy-saving recessed outlet | The outlet may cut power | Move the TV to an always-on outlet |
Step 3: press the power button on the TV
Press the power button under the logo or on the back of the TV, because its location depends on the model.
If the TV turns on, LG says the remote or the TV’s remote sensor is the likely problem.
Step 4: test the remote
- Replace the remote batteries.
- Point the remote at the camera of an Android phone.
- Press a button and watch the phone screen for a flashing light.
If no light flashes, the remote may not be working, though LG notes this test may not work on iPhones.
| Phone camera test | What it means |
|---|---|
| Light flashes on screen | The remote is sending a signal |
| No light flashes | The remote may be faulty |
Once the TV is on, our LG TV slow remote guide covers remote response problems.
What if the TV has sound but no picture?
Press the Volume button and check whether the volume bar appears on screen.
If it does, the screen is working, so LG says to check the input source and any connected devices.
If the screen stays black, the TV may need service, and our LG TV black screen guide covers the checks before that.
TV turns on, then shuts off again?
That is a different fault from a TV that never starts.
- LG TV turns on then off immediately covers a TV that cuts out right after starting.
- LG TV keeps turning on and off covers repeated power cycling.
- How to hard reset your LG TV explains the reset options.
What usually stops an LG TV from turning on?
LG lists four possible causes in its guide.
| Cause | What it looks like | Where to start |
|---|---|---|
| Loose power connection | Standby light off | Reseat the cord at the TV and the wall |
| Depleted remote batteries or signal interference | TV works from its own button but not the remote | Replace the batteries and run the phone camera test |
| Outlet or circuit breaker problem | Other devices on the same outlet are dead too | Reset the breaker or use another outlet |
| Hardware issue | Nothing above changes the result | Contact LG for service |
Where is the power button on an LG TV?
It varies by model, and LG says it is usually under the logo on the front or on the back of the TV.
Look for it before you test the remote, because a working button is the fastest way to split a remote fault from a TV fault.
Why the order of the checks matters
LG’s quick fix goes from the cheapest check to the most involved one.
- Power connection and standby light: costs nothing and rules out a loose cord.
- TV power button, then batteries: separates the TV from the remote.
- Outlet and breaker: rules out the house wiring before you blame the TV.
- Chatbot or technician: the last step when the first three fail.
Skipping ahead can send you to service for a problem that was only a tripped breaker.
What to do once the TV starts again
If a loose cord or a tripped breaker was the cause, the TV should behave normally without any settings changes.
If the problem comes back, note what the standby light was doing and which button you pressed, because it makes the problem easier to describe to LG.
- How to clear the cache on an LG TV helps if apps are slow after the TV comes back.
- How to fix an LG TV that will not connect to Wi-Fi covers network problems after a power loss.
Keep the model number from the label on the back of the TV handy, since LG’s troubleshooting tool asks you to select your model.
When should you contact LG?
If the checks above fail, LG says to schedule a service visit for diagnosis and repair.
| Option | What LG lists |
|---|---|
| Request a Repair | Online repair request, including a technician visit |
| Online chat | 24/7 chat support and the LG chatbot |
| Contact Us page | Phone, chat or email support |
LG’s TV sound guide adds that a service fee may apply if the product is out of warranty.
LG also notes its power guide covers all models, so images and menu names may differ on yours.
Sources
Steps come from LG’s if your LG TV won’t turn on guide, its TV power issues guide and its TV sound guide.