How To Fix Epson Printer Not Printing After Router Change (2026)
You swapped your router or changed internet provider, and now your Epson printer will not print over Wi-Fi.
This is common, because the printer still remembers the old network name and password, so it never joins the new network.
Follow the steps below in order, and plan on about 20 minutes if you need to reinstall the software.
Note: Epson’s router-change guides were written for specific models and older Windows and macOS versions, so menu names on your computer may differ slightly.
Quick answer: what to do first
| Printer’s Wi-Fi light | What it means | What to do |
|---|---|---|
| Shows connected | Printer joined a network | Restart the router, then the computer, then print |
| Not connected | Printer lost the old network | Reset network settings, then reinstall software and set up Wi-Fi again |
| Printer prints a test page but not from PC | Printer works, PC link is broken | Clear queue and untick Use Printer Offline |
Why does a router change stop an Epson printer printing?
A new router gives your home a new wireless network, and the printer has to be connected to it before anything can print.
That is why Epson’s guides have you reset the printer’s network settings and run wireless setup again rather than just restarting the computer.
Your computer may also need its printer software set up again, which is why the guides include a reinstall.
Step 1: test the printer without the computer
Epson’s first check is to print a nozzle check pattern from the printer’s own controls.
- If it prints, the printer hardware is fine and the problem is the connection.
- If it does not print, clear any error on the printer and try again.
- If it still will not print, contact Epson Support.
Step 2: clear the print queue
Delete any pending jobs from the Epson print queue, then try printing again.
An old stuck job from before the router change can block everything behind it.
Step 3: turn off offline mode
- Open the Epson print queue on your computer.
- Select the Printer menu.
- Deselect the Use Printer Offline checkbox.
- Try printing again.
If the printer still shows as offline in Windows 11, see our Windows 11 printer offline guide.
Step 4: check the printer’s Wi-Fi indicator
Epson tells you to check the printer’s Wi-Fi light before doing anything bigger.
- If it shows connected: unplug the router’s power cord, wait briefly and plug it back in.
- Try printing, and if that fails, restart your computer and try again.
- If it is not connected: go to the reinstall steps below.
After a router restart, other devices on your network may need to reconnect too.
Step 5: reset the printer’s network settings
When the printer is not connected, Epson starts by resetting its network settings, so it forgets the old router.
The reset procedure differs by model, so use the steps for your printer on Epson’s support site.
Step 6: turn the firewall off for setup
Epson asks you to disable your firewall while you install, and to turn it back on once Wi-Fi setup is finished.
| Computer | Where Epson says to find the firewall |
|---|---|
| Windows 10 (per Epson) | Settings > Network & Internet > Windows Firewall, or Control Panel > System and Security > Windows Firewall |
| Mac | Apple menu > System Preferences > Security & Privacy > Firewall tab |
| Third-party firewall software | Disable it too, or contact its maker |
Step 7: remove the old software and the old printer entry
- Windows: turn off the printer, disconnect any cables, then uninstall the Epson printer software from Programs and Features.
- Mac: open Apple menu > System Preferences > Printers & Scanners, select the printer and click the minus button.
Then unplug your router, wait briefly, and plug it back in.
Step 8: run the Drivers and Utilities Combo Package
- Go to your printer’s support page on Epson.com and open the Downloads tab.
- Download the Drivers and Utilities Combo Package and note where it saves.
- Open the file and follow the prompts.
- On Select Your Connection, choose Wireless connection.
- Choose Set up printer for the first time and follow the Wi-Fi instructions.
The installer normally sets up wireless automatically, so you usually do not need your network name or password.
If it asks, enter the network name (SSID) and password, which come from your router’s maker or whoever set up your network.
Does a new 5 GHz router cause problems?
Epson says that if your new router uses 5 GHz, you should set it to dual-band mode, with 2.4 GHz and 5 GHz both on.
Check your router’s documentation or your internet provider for how to change that setting.
Step 9: turn the firewall back on
Once Wi-Fi setup finishes, switch the firewall back on, along with any other firewall software you disabled.
If printing still fails, contact Epson Support, as Epson recommends at the end of each guide.
What to have ready before you reinstall
- Your printer’s exact model name, so you pick the right download.
- Your Wi-Fi network name (SSID) and password, in case the installer asks for them.
- Access to your router’s settings or documentation if it is a 5 GHz model.
Which Epson guide matches your computer?
| Your situation | Epson guide | Key difference |
|---|---|---|
| Windows PC, router replaced | Epson Windows router-replacement FAQ | Uninstall Epson software, firewall off, reinstall with Combo Package |
| Mac, router replaced | Epson Mac router-replacement FAQ | Delete old print queue, firewall off, reinstall with Combo Package |
| Printed wirelessly before, now cannot (newer models) | Epson troubleshooting FAQ for your model | Test print from printer, clear queue, restart router, then reinstall if needed |
Epson publishes separate versions of these pages per printer model, so search your exact model on Epson.com.
Do not leave the firewall off
Epson only asks you to disable the firewall for the setup, so turn it back on the moment wireless setup is complete.
What about phones and tablets?
Once the printer is back on the network, phones need to be on the same Wi-Fi to find it.
If an iPhone still cannot see the printer, use our No Printers Found on iPhone guide.
On a Mac that still will not talk to the printer, try our Mac printer communication fixes.