How To Clear The Print Queue In Windows 11 (2026)
A print job that will not go away can block everything behind it, so the whole queue just sits there.
Windows 11 gives you three ways to clear it, from cancelling jobs one by one to deleting the spooler’s files by hand.
This guide follows Microsoft’s steps in order, so you can stop as soon as printing works again.
Quick answer: clear a stuck print queue
| Step | What to do |
|---|---|
| 1. Cancel the jobs | Start > Settings > Bluetooth & devices > Printers & scanners, select the printer, then Open print queue and cancel each job |
| 2. Restart the spooler | Press Windows key + R, type services.msc, right-click Print Spooler, then Restart |
| 3. Clear the spool folder | Stop Print Spooler, delete everything in C:\Windows\System32\spool\PRINTERS, then start Print Spooler again |
| 4. Restart | Turn the printer off for at least 60 seconds, then restart the PC |
What the print spooler does
Microsoft describes the Print Spooler as the part of Windows that handles your print jobs.
When it hangs, documents stay in the queue, the printer stops responding, and apps can freeze when you press Ctrl + P.
Clearing the queue lets the spooler start again with nothing left in the way.
Microsoft’s stuck-queue page has Windows 10 and Windows 11 tabs, and the paths and steps are the same on both.
Work through the steps in order, because each one is more drastic than the one before it.
Step 1: Cancel the print jobs in Settings
- Open Start > Settings > Bluetooth & devices > Printers & scanners.
- Select your printer, then select Open print queue.
- Right-click each print job and select Cancel.
Try printing again once the list is empty.
Step 2: Restart the Print Spooler service
- Press Windows key + R, type
services.msc, and press Enter. - Scroll down to Print Spooler.
- Right-click Print Spooler and select Restart.
Microsoft says this can fix temporary printer recognition problems.
Step 3: Clear the spool folder by hand
Use this step only if cancelling the jobs did not clear the queue.
- Press Windows key + R, type
services.msc, and press Enter. - Right-click Print Spooler and select Stop.
- Open File Explorer and go to
C:\Windows\System32\spool\PRINTERS. - Delete all the files in that folder, because they are the stuck print jobs.
- Go back to Services, right-click Print Spooler, and select Start.
Stopping the spooler first matters, because Windows will not let you delete its files while the service is running.
Check that the spooler starts automatically
A separate Microsoft page on resetting the spooler adds one more setting to check.
- Search the taskbar for Services and open it.
- Double-click Print Spooler.
- Set Startup type to Automatic, select Start, then select OK.
Microsoft says to make sure it is Automatic so the spooler starts with Windows.
Step 4: Restart the printer and the PC
- Turn the printer off.
- Wait at least 60 seconds.
- Turn the printer back on.
- Select Start > Power > Restart to restart the PC.
- Try printing again.
Power-cycle the printer before you clear anything
Microsoft’s general printing steps start by restarting the printer itself.
- Turn off the printer and unplug it.
- Wait 30 seconds.
- Plug it back in and turn it on.
This is different from the 60-second wait in Step 4, which comes after you have cleared the queue.
Check the connection if jobs go stuck again
Microsoft lists connection checks that matter when the queue keeps filling up.
- For a USB printer, make sure the cable is firmly connected at both ends.
- For a wireless printer, turn on its wireless option and run the printer’s built-in wireless connectivity test from its menu.
- If you use access points, extenders or several routers with separate network names, the PC must be on the same network as the printer.
If the printer’s display says Printer in error state, Microsoft says to check for low paper or ink, an open cover or a paper jam, then try again.
Which fix to use
| Situation | Start with |
|---|---|
| One or two jobs are stuck | Cancel them in Open print queue |
| The queue will not empty after cancelling | Restart the Print Spooler service |
| Restarting the spooler changed nothing | Stop the spooler and delete the PRINTERS folder files |
| The spooler keeps stopping or crashing | Check for old or duplicate printer drivers in Device Manager |
If the Print Spooler keeps crashing
Microsoft says conflicting or outdated drivers are a common cause of spooler crashes.
- Select Start, type Device Manager, and open it.
- Expand Print queues or Printers.
- Uninstall any unnecessary, old, or duplicate printer drivers.
- Install the latest driver for your printer model from the maker’s website.
Our guide on adding a printer in Windows 11 shows how to put the printer back after removing it.
Run the Windows 11 printer troubleshooter
For Windows 11, Microsoft says to begin with the automated printer troubleshooter in the Get Help app.
It runs diagnostics and tries to fix the problem automatically.
If it does not, return to the steps above.
If the queue is clear but the printer still will not print
- If Windows says the printer is offline, see how to fix a printer offline in Windows 11.
- If the status reads error, see how to fix a printer in an error state in Windows 11.
- For an HP printer that will not print at all, see the HP printer won’t print guide.
Quick troubleshooting table
| Problem | What to try |
|---|---|
| Cancel does nothing | Restart the Print Spooler service |
| Cannot delete files in PRINTERS | Stop the Print Spooler first |
| Jobs come back after a restart | Clear the PRINTERS folder with the spooler stopped |
| Spooler is not running after restart | Set Startup type to Automatic and select Start |
| Apps freeze on Ctrl + P | Clear the queue and check for duplicate drivers |
Sources
Steps come from Microsoft Support’s Fix print job stuck in queue errors in Windows, Fix print spooler service not running errors in Windows, and Fix printer connection and printing problems in Windows.