|

How To Fix Printer Offline In Windows 11 (2026)

Your printer is sitting right there, powered on, yet Windows 11 insists it is offline and your document will not print.

This is one of the most common printer problems on Windows, and it is almost always a connection or queue issue rather than a dead printer.

Work through the steps below in order, and most people are printing again in about 10 minutes.

Quick answer: what to try first

SymptomTry this firstWhere to do it
Printer was working an hour agoPower-cycle the printer (30 seconds unplugged)Printer itself
Wireless printer, new router or extenderConfirm PC and printer are on the same networkPrinter menu and Windows Wi-Fi
Documents stuck, printer shows offlineCancel all jobs, then restart Print SpoolerPrinters & scanners and Services
Nothing above helpsRemove the printer and add it againSettings > Bluetooth & devices > Printers & scanners

Why does Windows 11 say my printer is offline?

Windows marks a printer offline when it cannot get a reply from it, and Microsoft points to several common causes.

  • Wireless trouble: the printer dropped off Wi-Fi or is on a different network than your PC.
  • Printer error state: low paper or ink, an open cover or a paper jam.
  • A stuck queue: old jobs jam the Print Spooler service.
  • A bad driver or setup: the printer entry itself is damaged.

The fixes below follow Microsoft’s own order, from quickest to most involved.

Do not skip the early steps, because a simple power cycle or network check can clear an offline status on its own.

Step 1: run the Windows printer troubleshooter

Microsoft says Windows 11 users should start with the printer troubleshooter in the Get Help app.

  1. Open the Get Help app from the Start menu.
  2. Search for the printer troubleshooter, or open Microsoft’s printer connection shortcut.
  3. Follow the prompts and let it apply any fix it finds.

Step 2: power-cycle the printer

  1. Turn the printer off and unplug it.
  2. Wait about 30 seconds.
  3. Plug it back in and turn it on.

Wait for the printer to finish starting up before you test a print.

Step 3: check the printer’s Wi-Fi connection

Use the printer’s own menu to confirm it is connected, because Windows can only reach it if it is on the network.

  • Look for the wireless icon, which many printers show in blue when active.
  • Run the printer’s built-in wireless connectivity test (see your manual or the maker’s website).
  • Confirm your PC is online too.

Step 4: make sure the PC and printer share one network

If you use access points, range extenders or several routers with separate network names, Microsoft warns that the PC must be on the same network as the printer.

A laptop on a guest network or a second router is a classic reason for a printer that looks offline.

If Windows also reports network discovery problems, see our guide to fixing network discovery is turned off.

Step 5: set the printer as default

  1. Open Settings and go to Bluetooth & devices > Printers & scanners.
  2. Select your printer and choose Set as default.
  3. If that option is missing, turn off “Let Windows manage my default printer” first.

Step 6: cancel stuck print jobs

  1. In Printers & scanners, select your printer and open the print queue.
  2. Click the ellipsis (…) menu.
  3. Choose Cancel all.

Step 7: restart the Print Spooler

  1. Type services in the taskbar search box and open Services.
  2. Find Print Spooler in the list.
  3. Right-click it and select Restart.

If jobs still will not clear, Microsoft’s longer procedure stops the spooler, deletes the files in the folder %WINDIR%\system32\spool\printers, then starts the spooler again with Startup Type set to Automatic.

Step 8: remove the printer and add it again

  1. Go to Settings > Bluetooth & devices > Printers & scanners.
  2. Select the printer, choose Remove, then confirm with Yes.
  3. Make sure the printer is on and connected, then select Add device.
  4. If Windows cannot find it, choose Add manually.

On ARM-based PCs, Microsoft says to use Add device to add the printer manually unless the maker gives other instructions.

Step 9: install the latest driver and restart

Download the newest driver from the printer maker’s support site and install it.

Then restart the PC and print a test page.

If you have an HP printer showing certificate warnings instead, use our HP printer certificate guide.

Is “Use Printer Offline” switched on?

Microsoft’s Windows 10 steps tell you to open the print queue and make sure Pause Printing and Use Printer Offline are both cleared.

Epson’s support pages give the same advice: open the print queue, select the Printer menu and untick Use Printer Offline.

If your Windows 11 print queue window has a Printer menu with that option, clear it and try printing again.

If you do not see the option, simply move on to the next step.

Where each setting lives in Windows 11

SettingPathUsed in step
Printer listSettings > Bluetooth & devices > Printers & scanners5, 6, 8
Set as defaultSelect the printer in Printers & scanners5
Cancel all jobsPrint queue > ellipsis (…) menu > Cancel all6
Print SpoolerSearch “services” > Print Spooler > Restart7
ARM checkSettings > System > About > System type8

One mistake to avoid when deleting spooler files

Only delete the files inside the printers folder, not the folder itself.

Follow Microsoft’s order exactly: stop the Print Spooler, delete the files, then start the service again.

Set Startup Type back to Automatic when you start it, so printing keeps working after a restart.

Skipping the restart of the service leaves every printer on the PC unable to print until you start it.

Which fix matches your situation?

What you seeLikely causeStep
Offline right after a router or Wi-Fi changeDifferent network or lost connection3 and 4
Jobs sit in the queue and never printStuck queue or spooler6 and 7
Wrong printer is selected in appsDefault printer setting5
Printer entry is damaged or listed twiceCorrupt setup8 and 9

What if the printer is still offline?

Check the printer for a paper jam, an open cover or empty ink, since Microsoft lists these as reasons for an error state.

If it still fails, contact the printer maker, and compare with our Brother printer fix if you own one.

Official sources

Leave a Reply

Your email address will not be published. Required fields are marked *