How To Fix Canon Ink Not Recognized Errors 1410 And 1682 (2026)
When a Canon PIXMA refuses to print and shows a support code such as 1410 or 1682, it is telling you it cannot recognize an ink tank or cartridge.
Canon’s manuals give a short fix for each code, and most start with taking the ink out and putting it back in properly.
This guide groups the codes by printer type so you can follow the page that matches your machine.
Quick answer: which code means what
| Support code | What Canon says | First action |
|---|---|---|
| 1410, 1411, 1412, 1413, 1414 | The printer cannot recognize an ink tank | Remove the tank shown on the screen and reinstall it until it clicks |
| 1660 | The printer cannot recognize the ink tank | Check the tank is installed and compatible with this printer |
| 1684 | The ink tank cannot be recognized | Install the correct ink tank |
| 1682 | The printer cannot recognize the FINE cartridge | Replace the FINE cartridge |
| 1890 | Shipping tape may remain in the holder | Open the cover and remove tape or packing material |
Step 1: find out which type of ink your Canon uses
Canon PIXMA models use two different ink formats, and the fix depends on which one you have.
- Ink tanks, which click into a print head holder and show a lamp or a color on the touch screen.
- FINE cartridges, which sit in the left and right slots of the holder on models such as the TS3700 series.
The codes in this guide come from Canon’s TS6200 series and TS3700 series error pages, so look up your own model’s page if it differs.
Step 2: reseat the ink tank for codes 1410 to 1414
For codes 1410, 1411, 1412, 1413 and 1414, Canon’s TS6200 pages give the same three actions.
- Look at the touch screen to see the color of the tank the printer cannot recognize.
- Remove that tank and install it again.
- Press the tank in until it clicks into place.
- If the error continues, replace the ink tank.
Canon uses the same wording for all five codes, so you do not need to work out which number you have before trying this.
Step 3: replace the tank the right way
If reseating does not help, Canon’s replacement page for the TS6000 series lays out the full process.
- Make sure the printer is on, then open the scanning unit or cover.
- Wait until the print head holder stops moving, and do not hold it or move it by force.
- Remove only the tank whose lamp is flashing fast, one tank at a time.
- Take the new tank out of its packaging and remove the orange tape and the protective film completely.
- Hold the tank with the orange cap facing up and remove the cap gently, then throw the cap away.
- Insert the front end into the print head at an angle, matching the label on the holder.
- Press the top until it clicks firmly and the ink lamp lights.
- Lower the cover gently and select OK if a message appears.
If the cover stays open for more than 10 minutes, Canon says the holder shifts to the right, and you close and reopen the cover to reset it.
What Canon says to avoid
| Do not | Reason |
|---|---|
| Leave orange tape on the Y-shaped air hole | It can cause ink splashing or poor printing |
| Squeeze the sides of the tank | Ink can splash if the air hole is blocked |
| Touch the inside of the cap or the open ink port | Canon warns against it when you remove the cap |
| Install a used ink tank | It may cause the nozzles to clog |
| Leave the printer without a tank | Replace a removed tank immediately |
Canon also says a tank in the wrong position prevents printing, and that printing will not work until all tanks are installed.
Codes 1660 and 1684
These two codes are less specific than 1410 to 1414.
For 1660, Canon says to check that the ink tank is installed and that it is compatible with this printer, because printing cannot continue otherwise.
For 1684, Canon says the printer cannot print because the tank may not be installed correctly or may not be compatible, and it tells you to install the correct ink tank.
On both pages you can cancel the print job by pressing the printer’s Stop button.
FINE cartridge models: code 1682 and E05
On the TS3700 series, Canon’s error list pairs the on-screen error E05 with support codes 1401, 1403, 1430 and 1485 for a cartridge that is not recognized.
| Screen error | Support code | Canon’s description |
|---|---|---|
| E04 | 168A | Cartridge not installed, not installed properly, or possibly the wrong type |
| E05 | 1401, 1403, 1430, 1485 | Cartridge not recognized |
| E09 | 1890 | Shipping tape or packing material may remain in the holder |
| E14 | 1684 | Cartridge not recognized |
| E15 | 1682 | FINE cartridge not recognized |
Its fix for E05 has three parts.
- Check that the color FINE cartridge is installed on the left and the black FINE cartridge is installed on the right.
- Check the model number of each FINE cartridge.
- If that does not fix it, replace the FINE cartridge with a new one.
For code 1682, Canon says to replace the FINE cartridge, and if the error persists the cartridge may be damaged, so you should contact a Canon service center.
Code 1890: leftover packing tape
On a new printer, Canon says shipping tape or protective material may still be in the cartridge holder.
- Retract the output tray extension and close the paper output tray.
- Open the cover and look at the FINE cartridge holder for tape or packing material.
- Remove anything you find, then close the cover.
When the code is not about ink
Some similar-looking codes point to other parts, so check which family yours belongs to.
- Codes 1401, 1403 and 1405 on many models mean the print head may be damaged, and Canon says to switch the printer off and on and then contact a service center if it stays.
- Code 1700 or 1701 is the ink absorber, covered in our Canon ink absorber guide.
- Codes 5100, 5B00 and B200 are covered in our Canon error codes guide.
If the ink is recognized but the page is streaky, see our Canon streaks and blurry prints guide.
Brother owners can read the matching Brother Cannot Detect Ink guide instead.