How To Fix A Printer In Error State In Windows 11 (2026)
When Windows says your printer is in an error state, it is reporting a problem it has found with the printer itself or with the way your PC talks to it.
Microsoft’s printer support page says to start with the simplest physical causes, such as low paper or ink, an open cover or a paper jam.
This guide follows Microsoft’s order for Windows 11 and Windows 10, from the printer’s own lights to the print spooler.
Quick answer: what to try first
| Step | What to do | Where it comes from |
|---|---|---|
| 1 | Check for low paper, low ink, an open cover or a paper jam | Microsoft’s note on the error state message |
| 2 | Turn the printer off, unplug it for 30 seconds, plug it in and turn it on | Microsoft general troubleshooting |
| 3 | Run the printer troubleshooter in the Get Help app (Windows 11) | Microsoft, aka.ms/PrinterConnection |
| 4 | Remove the printer in Settings and add it again | Microsoft general troubleshooting |
| 5 | Install the latest driver from the maker’s website | Microsoft general troubleshooting |
| 6 | Clear the print queue and restart the Print Spooler service | Microsoft spooler pages |
If the first two steps do not clear the message, Microsoft says the problem may be with the printer itself.
Check the printer for a physical problem
Microsoft lists three things to look for when Windows shows the error state message.
- Low paper or low ink.
- An open cover.
- A paper jam.
Look at the printer’s own display or lights too, because a printer that is waiting on you will often say why.
If a jam is the cause on a Brother machine, our Brother paper jam guide walks through clearing it.
Turn the printer off and on again
- Turn the printer off and unplug it.
- Wait 30 seconds.
- Plug it back in and turn it on.
This clears a printer that has frozen in a bad state, and Microsoft makes it step one of its general fix.
Check the connection
| Printer type | What Microsoft says to check |
|---|---|
| USB | The cable is firmly connected to both the printer and the PC |
| Wireless | The printer’s wireless is on, and its own connectivity test passes if it has one |
| Wireless with extenders or several routers | The PC and the printer are on the same network name (SSID) |
| Bluetooth | Follow Microsoft’s Bluetooth problem guide |
Many wireless printers have a button that shows a blue wireless icon, so check the printer’s manual for where it is.
If the printer shows as offline instead, read our guide to fixing a printer offline in Windows 11.
Run the Windows 11 printer troubleshooter
Microsoft says Windows 11 users should start with the automated printer troubleshooter in the Get Help app.
It runs diagnostics and tries to fix most printer problems automatically, and Microsoft links it at aka.ms/PrinterConnection.
Microsoft says Windows 10 and older versions skip this part and go to the general steps.
Remove the printer and add it again
- Select Start, then Settings, then Bluetooth & devices, then Printers & scanners.
- Select the printer.
- Select Remove, then select Yes to confirm.
- Make sure the printer is on and connected, then select Add device.
- Wait while Windows searches, then select Add device next to your printer.
- If it does not appear, select Add manually.
Microsoft says to print a test page afterwards to confirm the printer works.
Add it manually if Windows cannot find it
On the Add manually screen, Microsoft shows five options under Find a printer by other options.
For a printer plugged directly into your PC, choose Add a local printer or network printer with manual settings, then select Next.
- Select Use an existing port, pick the port the printer uses, and select Next.
- Select Have Disk if the printer came with a driver disc, or select Windows Update if not.
- Choose the manufacturer on the left and the model on the right, then select Next.
- If asked which driver to use, Microsoft says to usually select Replace the current driver.
- Name the printer, choose whether to share it, and select Next.
- Select Print a test page, then Finish.
On an ARM PC, Microsoft says some printers cannot be added with the maker’s installer, so use this Windows method instead.
Install the latest driver
Microsoft says most printers need the latest driver to work properly.
Its spooler guide adds that conflicting drivers are a common cause of spooler crashes.
- Select Start, type Device Manager, and open it.
- Expand Print queues or Printers.
- Uninstall printer drivers that are old, duplicated or no longer needed.
- Download and install the latest driver for your exact printer from the maker’s website.
Clear the queue and restart the print spooler
Microsoft says clearing the spooler’s files and restarting the service can fix stuck or failed print jobs.
| Part | Steps from Microsoft |
|---|---|
| Cancel jobs | Settings, Bluetooth & devices, Printers & scanners, select the printer, Open print queue, then right-click each job and select Cancel |
| Stop the service | Search for services, open Services, double-click Print Spooler, select Stop, then OK |
| Delete spool files | Search for %WINDIR%\system32\spool\printers, open the folder, and delete all files inside it |
| Start the service | Open Services again, double-click Print Spooler, select Start, set Startup Type to Automatic, then OK |
| Quick restart | Press Windows key + R, type services.msc, press Enter, right-click Print Spooler and select Restart |
Delete only the files inside the folder, not the folder itself.
For a queue that stays stuck on an HP machine, see how to fix print jobs stuck in the queue.
Print a test page
After each fix, print a test page so you know which step solved it.
If the printer is installed but still does not work, Microsoft says to check the manufacturer’s website for troubleshooting information or driver updates.
When to contact the printer maker
If the error state returns after a restart, a new driver and a clean reinstall, the fault is likely in the printer, so use the maker’s support page for your model.
Official sources: Fix printer connection and printing problems in Windows and Fix print spooler service not running errors in Windows.