How To Fix HP Print Jobs Stuck In The Queue (2026)

A print job that will not cancel can block every document behind it, so nothing prints from your HP printer.

HP describes this exact fault, including Cancel and Delete buttons that are grayed out or do nothing.

This guide follows HP’s steps for Windows and Mac in the order the company gives them.

Quick answer: which fix fits your computer

ComputerFix to try firstFallback
WindowsStop the Print Spooler and delete the spooled filesUninstall the HP driver and use the HP app
MacRun Cancel -a in Terminal, then restartReset the printing system
Windows or MacRun Diagnose & Fix in the HP appRemove old HP software and reinstall the HP app

What a stuck print job looks like

  • A document sits in the queue and never prints.
  • The Cancel and Delete buttons are grayed out or do not respond.
  • Newer jobs wait behind the stuck one and never start.

HP says to work through its tasks in order and test the printer after each one.

Why print jobs get stuck

HP says a job sticks when a device stops printing in the middle of the job.

Cause named by HPWhat to check
Sudden power outageRestart the printer and clear the queue
Low inkCheck the ink levels on the printer or in the HP app
No paperReload paper and resume
Paper jamClear the jam and restart the job
Third-party firewall softwareCheck whether firewall software is blocking the printer

HP calls its Diagnose & Fix tool the fastest way to identify and fix these issues on a Windows PC.

Reset the Windows printing environment

This is HP’s first fix on Windows, and it deletes the files that hold the stuck job.

  1. Turn off the printer and unplug its power cord.
  2. In Windows, search for and open Services.
  3. Right-click Print Spooler and click Stop, then close the Services window.
  4. Open File Explorer and browse to C: > Windows > System32 > spool > PRINTERS.
  5. Delete all files in the PRINTERS folder.
  6. Shut down the computer.
  7. Plug the printer back in and turn it on.
  8. Turn on the computer.

HP also offers a video for this fix on its page.

What each part of the Windows reset does

StepWhy it matters
Turn off and unplug the printerRestarts the printer before the queue is cleared
Stop Print SpoolerLets you delete the job files the spooler is using
Delete files in the PRINTERS folderRemoves the stuck print job files
Restart the computer and printerStarts both with a clean queue

Reinstall the printer through the HP app on Windows

If the queue keeps jamming, HP says to replace the print driver with the HP app.

  1. Disconnect any USB cable from the printer.
  2. Search Windows for Add or remove programs.
  3. Find your HP printer and click Uninstall.
  4. If it is not listed, open Printers & scanners, click the printer and choose Remove device.
  5. Click Yes if a User Account Control message appears.
  6. Finish the removal steps and restart the computer.
  7. Download the HP app from 123.hp.com or your app store and connect the printer.

Run Diagnose & Fix in the HP app

HP lists this tool for both Windows and Mac queue problems.

  1. Open the HP app and click your printer.
  2. Click Diagnose & Fix from the printer page, the Printers menu or the Diagnostics section.
  3. Click Start and keep the app open until the analysis ends.
  4. Follow the instructions on the results screen.

HP’s help page shortcut is the wrench icon in the bottom-left corner on Windows, or the printer drop-down in the top menu bar on a Mac.

Clear the print queue on a Mac

Close Image Capture, HP Easy Scan and HP Scan first if any of them are open.

  1. Open Terminal from Spotlight.
  2. Type Cancel -a and press Enter.
  3. Close Terminal and restart the Mac.

Reset the printing system on a Mac

HP warns that this removes all printers and scanners and clears print jobs and saved print settings.

  1. Open Printers & Scanners from Spotlight.
  2. Right-click, or Control-click, in the Printers list and select Reset printing system.
  3. Restart the printer.
  4. Click Add Printer, Scanner, or Fax, select your printer and click Add.

Remove HP software on a Mac and start over

  1. Download and install HP Easy Start from 123.hp.com/setup.
  2. Choose Uninstall HP Software from the HP Easy Start drop-down menu.
  3. Follow the prompts to remove everything.
  4. Install the HP app and reconnect the printer.

Which fix to run first

If this describes youRun this
One document is stuck on WindowsSpooler reset
Jobs are stuck on a MacCancel -a, then restart
The same jam returns after a restartReinstall with the HP app
You also see connection errorsDiagnose & Fix, then check the connection

If you use something other than Windows or a Mac

HP says its Virtual Assistant can guide you through clearing the queue on other operating systems.

The HP app also covers Android, and it requires Android 7.0 or later, iOS 14 or later, Windows 10 or later, or macOS 10.14 or later.

The order HP recommends

  • Run Diagnose & Fix first if you are on Windows or a Mac.
  • Use the manual spooler reset on Windows or the Cancel -a command on a Mac if the tool does not clear the job.
  • Reinstall the driver or HP software if jobs keep sticking.
  • Contact HP only after those steps fail.

After every step, send a short test page to see whether the queue moves.

If it does, stop there, because the later steps remove software and settings you may not need to touch.

When to contact HP support

If nothing clears the queue, HP offers its Virtual Assistant for guided help with printer issues.

You can also sign in or create an HP account to reach a live agent, though HP says that may require an active warranty.

Have your printer model name or serial number ready, because HP’s support pages use it to find the right drivers and manuals.

If the queue clears but the printer still will not respond, see how to fix an HP printer that shows offline.

Mac users can review old jobs with how to see the print history on a Mac.

Sources: HP: Print jobs stuck in print queue and HP: Print job stuck in queue.

Leave a Reply

Your email address will not be published. Required fields are marked *