|

How To Rescan Antenna Channels On Samsung, LG, Vizio, Sony (2026)

If your TV has an antenna plugged in and some channels are missing, run a new channel scan.

Each maker puts the scan in a different menu, so this guide lists the path for Samsung, LG, Vizio and Sony.

The paths come from each maker’s own support pages and manuals, and menus can differ a little by model year.

Quick answer: where the channel scan is

TV brandMenu path to the scan
SamsungSettings (All Settings) > Broadcasting > Auto Program > Start
LGSettings > All Settings > General > Channels > Channel Tuning (2021 and 2022 models)
VizioMenu > TV Channels > Find Channels
SonySettings > Channel & Inputs > Channels > Channel setup > Auto tuning (Google TV)

Before you scan

Samsung’s support page says to make sure the antenna is installed and the coax cable is firmly connected.

On a Samsung TV, plug the coax cable into the ANT IN port on the back of the TV, or on the One Connect Box if you have one.

Samsung also says the Broadcasting menu is greyed out unless the TV’s source is set to TV, so switch to the TV source first.

When you should rescan

LG says to run automatic channel setting during initial setup, after moving the TV, or when your cable provider changes its channels.

Vizio’s manual says that moving the TV to an area with different channels requires the TV to scan again.

Sony says to run Auto Program after moving to a new home, changing providers or checking for newly launched channels.

Samsung TV

  1. Change the source to TV.
  2. Press the Settings button and select Settings, or All Settings.
  3. Select Broadcasting, then Auto Program.
  4. Select Start.
  5. Choose Air for an antenna, Cable for a cable box, or Both.
  6. When the scan finishes, select Close.

Choose Air if you use an antenna only.

On a 2025 Samsung Smart TV, Samsung’s page gives a slightly different path: Settings, All Settings, General & Privacy, Broadcasting, Auto Program.

That page says Auto Program may be labeled Auto Tuning depending on your region.

It also says the Broadcasting menu appears only when an antenna cable is connected and Connected Devices is set to TV.

Samsung warns that a scan replaces your previously saved channels, so do not run it if you use a cable or satellite box.

LG TV

  1. Press the Settings button on the remote.
  2. Select All Settings.
  3. Follow the path for your TV year in the table below.
  4. Select Start to begin the search.
  5. When the search finishes, select End.
TV yearMenu path after All Settings
2022 (webOS 22)General > Channels > Channel Tuning, then choose your connected antenna
2021 (webOS 6.0)General > Channels > Channel Tuning
2017 to 2020 (webOS 3.5 to 5.0)Channels > Channel Tuning > Auto Tuning

LG adds that some models released since 2019 start Auto Tuning if you press the Mute button on the remote three times.

LG’s page lists paths up to the 2022 models, so check your TV’s manual if your menus look different.

Vizio TV

These steps come from the Vizio manual for its 2020 V-Series TVs.

  1. Press the Menu button on the remote.
  2. Go to TV Channels, then Find Channels, and press OK.
  3. Wait until the scan reaches 100%.
  4. Highlight Done and press OK.

To add channels without losing your current list, choose TV Channels, then Find New Channels instead.

Vizio says a channel scan is required for free over-the-air channels received with an antenna.

The manual also says you can run Find Channels from the SmartCast Mobile app at Menu Tab, SmartCast Devices, your TV name, Channels, Find Channels.

Sony TV

Sony’s menus depend on whether your TV runs Google TV or an older Android TV.

Sony TV typeMenu path
Google TVQuick Settings > Settings > Channel & Inputs > Channels > Channel setup > Auto tuning > Digital > Set up > Next
Android TV (2020 help guide)Home > Settings > BRAVIA Settings > Channel setup > Signal type > Antenna > Auto program > Yes

The Google TV path is from Sony’s UK retune page, and it says to enter your PIN code if the TV asks for one.

On the Android TV guide, Sony tells you to check the CABLE/ANTENNA connection first and then select Yes to continue.

If channels are still missing

Vizio’s manual suggests running Find Channels again if channels are missing.

For best reception, the same manual says to place the antenna near a window or move it around the room.

For a Samsung TV, Samsung’s 2025 page says to check that the coaxial cable is firmly connected and the antenna is positioned for a strong signal.

The same page says to update the TV software and restart the TV before scanning again.

If you cancel a Vizio scan, the channels already found are kept.

Extra notes by brand

  • Vizio says a scan is also required for cable channels connected directly to the wall without a cable box.
  • Vizio says removed channels can still be viewed by typing their number on the number pad, and a channel lock in Parental Controls is how you fully block one.
  • Sony’s Android TV guide lists Shown channels in the same Channel setup menu, which controls which channels appear when you channel surf.
  • Sony says that if a Google TV channel shows a scrambled or undecodable signal after tuning, you may need to insert a CI+ module in the slot on the back of the TV, depending on your provider.
  • LG says to use the external input instead if you watch through a set-top box.

If you have no antenna

Samsung says that instead of an antenna or cable, you can use Samsung TV Plus.

Press the Home button and select Samsung TV Plus, which needs a Samsung account and an internet connection.

Sources

Leave a Reply

Your email address will not be published. Required fields are marked *