How To Fix A Roku TV Antenna With No Channels Found (2026)
If you connected an antenna to your Roku TV and the Live TV scan finds few channels or none, the cause is usually the cable, the antenna position or the scan itself.
Roku’s support pages list a clear order of checks, and each one takes only a few minutes.
This guide follows that order and adds the Roku TV settings for wrong local channels and the Live TV guide.
Quick answer
| Symptom | What to try first |
|---|---|
| Antenna connected but no channels | Go to Home, Live TV, Scan for channels |
| Fewer channels than expected | Move the antenna near a window or higher up and rescan |
| Channels from the wrong area | Set the zip code under Settings, System, Zip code, then set up Live TV again |
| Live TV tile missing from the Home screen | Settings, TV inputs, Live TV, Set up input |
| No Signal after connecting a cable box | Check the HDMI cable and select the matching input |
What you need before scanning
- An HDTV antenna, plus its power source and coaxial cable (usually included).
- An internet connection for setup and Live TV features.
Roku notes that channel count depends on your location and antenna placement.
Connect the antenna correctly
- Connect the antenna’s coax cable to the Ant/Cable In port on the back of the TV.
- Plug the antenna into a power outlet or USB power source if it needs power.
- Press Home on the Roku remote, then select Live TV.
- Follow the on-screen steps to scan for channels.
Roku says the scan can take several minutes, so let it finish.
If Live TV is missing from the Home screen
Go to Settings, then TV inputs, then Live TV, and select Set up input.
Roku’s setup guide also says to connect the antenna to the Live TV input on the back of the TV and select the Live TV tile to run the scan.
Scan or rescan for channels
Go to Settings, TV inputs, Live TV, then select Scan for channels.
Roku advises rescanning after any antenna move, even if you scanned before.
Work through the antenna checks in order
| Step | What Roku says to do |
|---|---|
| 1. Coax connection | Make sure the cable is firmly seated in Ant/Cable In and look for bent or broken connectors, sharp bends, fraying or weather wear; try a different coax cable if you suspect damage |
| 2. Scan or rescan | Settings, TV inputs, Live TV, Scan for channels |
| 3. Raise and aim | Place the antenna near a window, higher up, facing your local broadcast towers when possible |
| 4. Clear obstructions | Keep it away from thick interior walls, metal, concrete and large buildings |
| 5. Avoid electronics | Keep it a few feet from Wi-Fi routers, LED bulbs, baby monitors, cellular boosters and large metal appliances |
| 6. Check the amplifier | It must be plugged in and on; near broadcast towers, try removing it and rescanning |
Why an amplifier can cause problems
Roku says an unpowered amplifier can block the signal.
It also says that if you live near broadcast towers, an overly strong signal can overload the tuner.
In that case, disconnect the amplifier and rescan.
Fix channels from the wrong area
- Press Home.
- Select Settings, then System, then Zip code.
- Enter your zip code and press OK.
- Set up the Live TV input again so the TV can re-scan over-the-air channels.
Use the Live TV Channel Guide
While watching a live streaming or over-the-air channel, press left on the directional pad to open the guide.
Roku says you can browse up to 7 days ahead and press replay to return to the current day and time.
| Detail | What Roku states |
|---|---|
| Live streaming listings | United States only |
| Over-the-air listings | United States and United Kingdom |
| Without internet | You still see a basic channel list, but not detailed listings |
| Cable TV | Not available for cable subscriptions, including set-top boxes or a direct connection to the Live TV input |
Show only over-the-air listings
- Press Home.
- Select Settings, TV inputs, Live TV.
- Select Hide streaming TV channels.
- Check Hide all.
Repeat the steps and uncheck the box to show streaming channels again.
If you use a cable or satellite box instead
- Turn off the Roku TV and the box.
- Connect an HDMI cable from the box to an open HDMI port on the TV.
- Turn both devices back on.
- Press Home and select the matching input, such as HDMI 1 or HDMI 2.
If you see No Signal, confirm the cable is fully seated and the correct input is selected, and try a different HDMI port or cable.
The Roku remote only controls Roku TV functions, so use the box’s own remote while on that input.
For an HDMI source that still shows nothing, see our HDMI no signal guide for the same cable and input checks.
Switch between antenna, cable and streaming
On a Roku TV, press Home, move down to Inputs, and choose the input you want, then press OK.
Roku says the list includes Live TV for an antenna or direct cable, plus HDMI inputs such as a cable box on HDMI 1 or a Roku player on HDMI 2.
To return to Roku streaming, press Home on the Roku remote.
If you connect a new device later, Roku says to go to Settings, Remotes & Devices, Add Devices.
The purple star on over-the-air shows
Some over-the-air programs show a purple star indicator, and pressing Star on the highlighted program shows ways to stream it from the beginning or find more episodes.
Roku notes that not every over-the-air show has the indicator, and it will not appear if Smart TV experience is disabled or was never enabled.
Remove the Live TV input if you have no antenna
Highlight the Live TV tile, press Star, and select Remove input.
Related Roku TV problems
If the screen stays dark, try our Roku TV black screen guide.
If the remote will not respond, see the Roku TV remote fix.