How To Fix HDMI-CEC And ARC Not Working On A Roku TV (2026)
If your Roku TV remote will not turn the soundbar up, or the picture plays but the soundbar stays silent, two HDMI settings are usually responsible.
Those settings are HDMI-CEC, which lets connected devices send commands to each other, and ARC, which sends the TV’s sound back out over HDMI.
Roku’s own support pages cover both, and the fixes below follow them step by step.
Quick answer
| What you notice | Most likely cause | First thing to try |
|---|---|---|
| Roku remote cannot control the TV or another device | CEC is off | Turn on System audio control and 1-touch play |
| Picture works but the soundbar is silent | ARC or eARC is off, or the wrong HDMI port is used | Use the port labeled ARC or eARC and enable it |
| Devices power off or switch inputs on their own | CEC commands are conflicting | Unplug everything for about a minute and reconnect in order |
| No surround sound from the receiver | Audio format is not detected correctly | Check the S/PDIF and ARC setting |
What CEC and ARC actually do
According to Roku, HDMI-CEC lets connected HDMI devices send commands to each other, so you can control the TV with your Roku remote.
ARC, short for Audio Return Channel, sends TV audio back over HDMI to a soundbar or receiver.
Many TVs need CEC switched on before ARC works, so always check CEC first.
Turn on CEC on a Roku TV
- Press Home on the Roku TV remote.
- Select Settings, then System.
- Select Control other devices (CEC).
- Highlight System audio control and check the box.
- Highlight 1-touch play and check the box.
Turn on ARC or eARC on a Roku TV
- Enable CEC using the steps above.
- Stay in Settings, System, Control other devices (CEC).
- Highlight ARC (or eARC, if your model offers it).
- Press OK to check the box.
Roku says ARC is available on all Roku TVs, while eARC is available only on select models.
Plug the soundbar into the right port
Roku’s help page says to connect the soundbar or receiver to the TV HDMI port labeled ARC or eARC, and that no second audio cable is needed.
A soundbar in an ordinary HDMI port will not receive the TV’s sound back, so check the labels on the back of the TV.
Both the TV and the soundbar or receiver must support eARC, otherwise the connection falls back to ARC.
Check the HDMI cable type
Roku lists different cable requirements for each connection type.
| Connection | Cable Roku lists |
|---|---|
| ARC | Standard HDMI cable; Premium High Speed for 4K/HDR |
| eARC | High Speed HDMI cable with Ethernet; Premium High Speed with Ethernet or Ultra High Speed for 4K/HDR |
| ARC or eARC with 8K/HDR | Ultra High Speed HDMI cable |
Make sure each cable is fully inserted and in good condition before changing any settings.
If the Roku remote cannot control the TV or devices
The most likely cause, per the help page, is that CEC is off.
- Look in the TV settings for a label such as HDMI Control, CEC, or Control other devices.
- Turn it on.
- Confirm the HDMI cable is firmly connected between compatible devices.
- Restart the TV and the HDMI device if the change does not take effect right away.
If the picture works but the soundbar is silent
- Connect the soundbar to the ARC or eARC port.
- Set the TV sound output to HDMI ARC (or eARC).
- Make sure CEC is enabled.
- If an eARC mode setting appears, set it to Auto if available.
Our guide to a soundbar with no sound from the TV walks through the same idea on a Sonos bar.
Set the surround sound option
Go to Home, Settings, System, Audio, then S/PDIF and ARC to choose how the TV sends sound out.
| Option | What Roku says it does |
|---|---|
| Auto detect (default) | The TV detects the receiver or soundbar capabilities over HDMI |
| Auto passthrough | Sends unmodified Dolby Digital, Dolby Digital Plus or DTS when content and receiver support it; unsupported formats may be converted to stereo PCM |
| Specific audio formats | Pick a format manually if the receiver is not detected correctly and you know it supports that format |
ARC compared with optical
| Connection | What Roku says it supports |
|---|---|
| Optical (TOSLINK) | 2-channel uncompressed PCM or 5.1-channel compressed Dolby Digital or DTS |
| HDMI ARC | Compressed formats including Dolby Digital Plus and Dolby Atmos |
| HDMI eARC | Adds uncompressed formats (DTS-HD Master Audio, DTS:X, Dolby TrueHD, Dolby Atmos) and built-in lip-sync |
If optical is your only option, remove the protective caps from both cable ends first.
If your TV runs other software
Roku’s article also lists the CEC menu names on TVs that use a different operating system, which helps when a soundbar is paired with a non-Roku set.
| TV software | Where Roku says to enable CEC |
|---|---|
| Fire TV | Settings, Display & Sound, HDMI-CEC Devices; turn on 1-Touch Play and Power Control |
| Android TV or Google TV | Settings, Inputs or External devices control; turn on Control Other Devices (CEC) |
| Samsung | Settings, All Settings, Connections, External Device Manager; turn on Anynet+ (HDMI-CEC) |
| LG | Settings, General; set SIMPLINK (HDMI-CEC) to on |
| Vizio | Settings, All Settings, System, CEC; turn CEC on |
| Sony | Settings, Watching TV, External Inputs; turn BRAVIA Sync settings on |
The brand names on a Roku TV can differ, so use the Roku menu path from earlier if your set runs Roku OS.
If devices behave unpredictably
- Unplug all HDMI devices and the TV for about one minute.
- Plug in and power on only the TV.
- Plug in the HDMI audio device, then the other HDMI sources.
- If a receiver sits between the TV and other devices, connect the devices directly to the TV instead.
- Check for a TV software update, since Roku notes some CEC and ARC problems are fixed by updates.
If the whole TV is misbehaving, see our Roku TV black screen guide.
Final checklist
- Is the soundbar in the ARC or eARC port?
- Is HDMI-CEC on?
- Is HDMI ARC selected as the sound output?
- Were devices reconnected in the correct order?
- Is the cable seated properly and in good condition?
- Is the TV software current?
When to contact the manufacturer
Roku says that if problems continue you should contact the TV manufacturer and note which devices are connected.
For CEC and ARC settings on the soundbar or receiver itself, Roku says to consult that product’s manufacturer.
If the remote is the real problem, try our Roku TV remote fix.