How To Fix No Sound On A Roku Player Or Stick (2026)
If your Roku player or stick shows a picture but plays no sound, the fault is usually in the volume chain, a cable, or the audio format setting.
Roku sorts the fixes by how the player is connected, so the right steps depend on whether you plug into a TV or into a soundbar or receiver.
This guide walks through each setup and ends with the audio format changes that solve most surround problems.
Quick answer: no sound fixes by setup
| Your setup | Check first | Next fix |
|---|---|---|
| Player straight into the TV | TV volume and mute | Try another TV input or a different cable |
| Player through a soundbar or receiver | Correct input and master volume on the soundbar or receiver | Move to another input and replace cables one at a time |
| Optical (S/PDIF) cable | Remove the plastic caps from the cable ends | Set Digital output format to Dolby Digital |
| Sound missing only on surround content | Whether your system supports that surround format | Set Digital output format to Stereo |
Roku’s page covers the case where you can see the picture but cannot hear anything.
If the picture is also missing, see our Roku black screen guide.
Player connected directly to the TV
- Check the TV volume and make sure mute is off.
- Confirm the volume is high enough to hear.
- If you use a composite cable, press the red and white audio connectors firmly into both ends.
Roku says the TV maker’s manual can help with TV-side volume settings.
Try a different TV input and cable
- Move the player to a different TV input that you know works.
- Note whether sound returns.
- Swap in a different cable.
If sound returns on another input, Roku says the original input is the problem, not the player.
Player connected through a soundbar or receiver
- Select the correct input on the soundbar or receiver.
- Check mute and volume on the TV, and the master volume on the soundbar or receiver.
- With composite cables, check both links, from player to soundbar or receiver and from there to the TV.
- Move the player to another input on the soundbar or receiver that you know works.
- Replace the cables one at a time.
Replacing cables one at a time shows you which one is faulty.
Optical cable: remove the protective caps
Roku says to take the protective plastic cap off each end of an optical cable before plugging it in.
A cap left on can cause a poor connection, or damage the cable or the port.
How do you set the Roku output to Dolby Digital?
- Press Home on the remote.
- Select Settings, then Audio.
- Select Digital output format.
- Select Custom.
- Highlight Dolby, then select Dolby Digital.
Roku lists this change for optical connections, where the default output may not suit your sound system.
No sound only on surround content
If sound drops out only when a show or movie plays in surround, your TV, receiver or soundbar may not support the format being sent.
Roku names Dolby Digital Plus and Dolby Atmos as examples of formats that some equipment cannot decode.
- Press Home.
- Select Settings, then Audio.
- Select Digital output format.
- Select Stereo.
Which audio formats does a Roku player pass through?
| Format | Roku player support |
|---|---|
| Stereo | All listed models |
| Dolby Digital | All listed models |
| Dolby Digital Plus | All listed models |
| Dolby Atmos | Some models only |
| DTS | Supported models only |
Roku’s surround guide adds that a stereo-only TV or soundbar will never produce surround sound.
The guide also recommends a Premium High-Speed HDMI cable and at least one audio format that both the Roku and your sound system support.
Auto or Custom: which output format setting should you use?
| Setting | What it does | When to use it |
|---|---|---|
| Auto | Default; the Roku chooses the output | Normal use |
| Custom | Lets you pick a format your system supports, such as Dolby Digital or DTS | You hear only stereo and want surround |
| Stereo | Sends two-channel sound | Surround content has no sound |
| Roku Volume Modes | A separate setting; turn it off if it forces stereo | Surround plays as stereo |
If you hear only stereo, Roku says to confirm every cable is firmly connected, and then restart both the TV and the sound system.
Change the setting from Auto to Custom and choose a format your system supports before you blame the equipment.
On streaming apps, pick a 5.1 audio track where one is offered, for example English 5.1 on Netflix.
Roku adds that some content is stereo-only, and some apps offer 5.1 only on certain titles.
How should a soundbar or receiver be wired?
| Setup | How Roku says to connect it |
|---|---|
| TV supports surround | Plug the Roku into an HDMI port on the TV |
| Soundbar or receiver with HDMI switching | Plug the Roku into an HDMI IN on the soundbar or receiver, then run a second HDMI cable from its HDMI OUT to the TV |
| ARC (audio return channel) | Plug the Roku into a TV HDMI port, then connect the TV HDMI-ARC port to the HDMI-ARC port on the soundbar or receiver |
Check your soundbar or receiver manual to confirm it supports HDMI switching before you use the second option.
A wrong HDMI path is a common reason for silence or for stereo-only sound.
Still no sound: reconnect everything
- Disconnect and reconnect every cable, including the power cable.
- Set Digital output format to Stereo with the menu path above.
- Restart the TV and the sound system.
If the player itself freezes or restarts, see our Roku restarting guide.
A remote that will not change volume is a separate issue, covered in our Roku remote guide.
If the picture disappears too
- Set the TV to the HDMI input where the Roku is connected.
- Check that every HDMI cable is secure.
- In a soundbar or receiver setup, make sure the Roku goes into the HDMI IN and a separate cable runs from the HDMI OUT to the TV.
Roku also recommends Premium High-Speed HDMI cables and a TV port that supports HDCP 2.2 and HDMI 2.0 for 4K and HDR.
When to contact Roku
Roku’s no-sound page sends you to the TV, receiver or soundbar maker’s documentation for settings on that equipment.
If the sound stays silent on a different input, a different cable and a different TV, the player may be faulty, so contact Roku support.