How To Fix A Brother Printer Offline On Windows Or Mac (2026)

A Brother printer that shows as offline is one your computer has stopped being able to reach, even if the printer looks fine.

Brother’s online user guides treat this as a printing or network problem and give a short list of checks for each.

This guide follows those pages for Windows and Mac, starting with the quickest checks.

Quick answer: what to try first

What you seeTry this first
Printer shows offline in WindowsOpen See what’s printing and make sure Use Printer Offline is not ticked
Printer shows offline on a MacRemove the printer in Printers & Scanners and add it again
A failed job is stuckDelete it from the queue, or cancel all documents in the printers folder
Wireless printer, no connectionPrint the WLAN Report and look up the error code
Printing and scanning both fail on the networkRun a ping test and check firewall rules
Nothing else worksUninstall and reinstall the Brother drivers and software

Why a Brother printer shows offline

Windows and macOS label a printer offline when the computer cannot get a reply from it.

Brother’s guides list causes such as the machine being switched off, the wrong driver being selected, a failed job still in the queue, a firewall blocking traffic, or the machine and computer sitting on different networks.

Work through the checks below in order, because the early ones take a minute and rule out the most common causes.

Check the printer itself first

Brother’s network checklist starts with the physical basics.

  • The machine, router and hub (if you have one) are powered on, and the link light on the router or hub is blinking.
  • The power cord is connected and the machine is switched on.
  • All protective packaging has been removed from the machine.
  • Covers are fully closed and paper is loaded correctly in the tray.
  • On a wired network, the network cable is firmly connected at both ends.

If the machine shows an error on its display or in the Status Monitor, clear that first, because Brother tells you to check the Status Monitor or control panel when nothing prints.

Also make sure the machine is not in Power Off mode, since Brother says to turn it on and resend the print data.

Turn off Use Printer Offline in Windows

On Windows, Brother says to confirm the printer is not set to work offline.

  1. Open Control Panel and choose View devices and printers.
  2. Right-click your Brother model and choose See what’s printing.
  3. Open the Printer menu in the window that appears.
  4. Make sure Use Printer Offline is not selected.

Brother notes that the menu path differs a little between Windows versions.

If you are on Windows 11, our guide to fixing printer offline in Windows 11 covers the same status from the Windows side.

Remove and re-add the printer on a Mac

For a Mac, Brother’s instruction is short: open Printers & Scanners in System Preferences, and if the machine shows as offline, remove it and add it again.

Adding it again makes the Mac look for the machine afresh instead of using a stale connection.

Do this after the printer is on and connected to the same network as the Mac.

Clear a stuck print job

A failed job left in the queue can stop everything behind it.

Brother says to delete the job from the queue, and if it is not listed, to open the printers folder and cancel all documents.

SystemWhere the printers folder is
Windows 10Start > Windows System > Control Panel > Hardware and Sound > View devices and printers
Windows 7Start > Devices and Printers
MacSystem Preferences > Printers & Scanners

Brother’s page lists these paths for the versions it covers, so newer Windows releases may differ slightly.

Run a ping test

If the printer is on the network, a ping test shows whether your computer can reach it.

  1. Find the machine’s IP address; Brother’s Network Configuration Report lists the machine’s network details.
  2. On Windows open Command Prompt, or on a Mac open Terminal.
  3. Type ping followed by a space and the machine’s IP address, then press Enter.

If the replies come back, Brother says the machine is working and is on the same network as the computer.

If they fail, the machine is not on the same network, so check that the IP address and subnet mask on both devices match.

Read the WLAN Report for Wi-Fi errors

For a wireless Brother printer, Brother says to print the WLAN Report and check the error code it shows.

The page for HL-L2460DW and related models lists these codes.

CodeMeaning and what Brother says to do
TS-01Wi-Fi is off; turn on WLAN and unplug any network cable
TS-02Router not detected; check it is on, move the machine closer, check MAC filtering, restart the router
TS-03Network or security settings may be wrong; verify the SSID and security details
TS-04Router uses an unsupported authentication or encryption method; change it to a supported one
TS-05SSID or network key is incorrect; re-enter it with exact capitals
TS-06Security details are wrong; confirm the key, restart router and machine, turn off stealth mode
TS-07 / TS-08WPS not found, or more than one WPS router in range; set up WPS on one router only

Our separate guide to a Brother printer that will not print covers the printing side.

Check firewall and security software

Security software can block a Brother machine without showing any alert.

Brother’s page lists the ports to allow when network scanning or PC-Fax receive is blocked.

FunctionProtocol and ports
Network scanning (Windows)UDP 54925, 137 and 161
Network PC-Fax Receive (Windows)UDP 54926

On a Mac, Brother says to open Brother iPrint&Scan, click Select your Machine, and follow the prompts to pick the network machine again.

Use the repair tool or reinstall the software

On Windows, Brother points to its Network Connection Repair Tool when the wireless connection was interrupted or the IP address does not match.

If printing and scanning still fail, Brother’s last resort is to uninstall the drivers and Brother software, then install the latest versions of both.

If you use an iPhone and your printer does not appear at all, try our no printers found on iPhone guide instead.

When to contact Brother support

If the printer is still offline after reinstalling, the machine may have a fault that settings will not fix.

Brother says technical help is available by calling the support number for the country where the machine was bought.

Model-specific answers are on the FAQs and Troubleshooting page for your model at support.brother.com.

Sources

Brother online user’s guides: Printing Problems (MFC-L9610CDN), Wireless and Network Troubleshooting (MFC-J series) and Wireless LAN Report Error Codes (HL-L2460DW).

Leave a Reply

Your email address will not be published. Required fields are marked *