How To Fix A Time Machine Backup That Failed On A Mac (2026)
A Time Machine backup that fails, stops or never finishes usually has a cause you can find: a full disk, a bad connection, a file that is not available or a disk error.
Apple has a long checklist for backups that will not complete, and a second page that names the common failure messages.
This guide puts them in order, starting with the checks that take a minute.
Quick answer: match the problem to the fix
| What Time Machine reports | Likely cause | First fix |
|---|---|---|
| Disk is full or nearly full | Backup disk too small | Exclude items, or use a larger disk |
| Cannot create a snapshot | Mac startup disk almost full | Free up space on the Mac |
| Error occurred while preparing the backup | Virus scanning software blocking it | Update it and exclude the backup disk from scans |
| Disk is read-only | Problem with the disk or its file system | Run First Aid in Disk Utility |
| Some files unavailable | Files cannot be read yet | Back up while the Mac is unlocked |
| Backup stops partway | Disk disconnected | Check the drive in Finder and remove USB hubs |
| Network backup fails | Network drop or firewall software | Stay on the same network as the backup disk |
Check the connection to the backup disk
Apple says the backup disk must be plugged in, turned on and firmly connected.
- Local disk: plug it straight into your Mac, not through a USB hub or another device.
- Network disk: make sure the connection is stable and your Mac is on the same network as the disk.
To confirm the disk is visible, open Finder and check that the backup drive is listed.
If it is missing, our guide to an external drive not showing up on a Mac covers that case.
Make sure the backup disk is big enough
Apple recommends a backup disk with at least twice the storage capacity of your Mac.
A Mac with 1 TB of storage should ideally back up to a disk of at least 2 TB.
Apple adds that the disk should be larger than the data you back up, because Time Machine keeps the last remaining backup.
If you cannot upgrade, you can exclude items from the backup, and that is the second option Apple gives for a full disk.
Free up space on your Mac
If the Mac’s own disk is almost full, Time Machine may not have the temporary space it needs.
Apple says this can show up as Time Machine being unable to create a snapshot.
Delete files you no longer need, and see our guide to freeing up space on a full Mac for the steps.
Restart the Mac if the disk is full but holds several backups
Apple says that if the disk is full and you have more than one backup, restarting your Mac may resolve the issue.
Restart, then start a backup again from the Time Machine menu in the menu bar.
Deal with files that are unavailable
Time Machine may report that a backup is delayed or incomplete because some files were unavailable.
Apple gives two ways forward.
- Back up while the Mac is unlocked: some protected files can only be read when it is unlocked.
- Wait: Time Machine tries again during a later automatic backup.
If you use a cloud sync or backup service, Time Machine may say some files cannot be backed up until syncing finishes.
Keep the Mac plugged in and online so syncing finishes sooner, or temporarily exclude your sync folders.
Verify a network backup
If you back up over a network and it keeps failing, Apple suggests verifying the backups.
Hold the Option key and choose Verify Backups from the Time Machine menu in the menu bar.
Apple says this only works if you have completed a network backup successfully before.
Check security software and VPNs
Apple says VPN software and other third-party security software can interfere with the connection to the backup disk.
For the preparing-the-backup error, Apple points to virus scanning software.
- Make sure your antivirus software is the latest version, especially after a macOS update.
- Exclude your Time Machine backup disk from virus scanning.
For a network backup that keeps dropping, Apple names third-party firewall software as a possible cause.
Repair the backup disk with First Aid
Apple says to repair the backup disk with Disk Utility when it is read-only or the backup keeps failing.
- Open Finder, then Applications > Utilities, and open Disk Utility.
- Open the View menu and choose Show All Devices.
- Select the last volume listed under your backup disk.
- Click First Aid, then click Run, and enter your administrator password if asked.
- Repeat for the item above it in the sidebar, working up through volumes, containers and the device itself.
| Order | What to select in the sidebar, then run First Aid |
|---|---|
| 1 | Each volume and volume group |
| 2 | Each container |
| 3 | The device itself |
If the First Aid button is dimmed, Apple says to skip that item.
Apple warns that Disk Utility may find errors it cannot fix, so keep any other copy of your files safe first.
Update the disk and your software
Apple also suggests checking the disk manufacturer’s website for firmware updates and instructions.
Install the latest macOS updates too, and if you use a Time Capsule, update its software and firmware.
If the macOS update will not install, see our guide to a Mac that will not update macOS.
If you are restoring a backup
| Backup made in | Mac you restore to must run |
|---|---|
| macOS Monterey 12 or later | macOS Big Sur 11 or later |
Start over as a last resort
If nothing works, Apple says to erase the backup disk in Disk Utility and then select it again in Time Machine.
Erasing removes everything on the disk, including existing backups, so only do this if you no longer need them.
You can also pick a different backup disk instead.
If backups work but take too long
Apple treats a slow backup as a separate problem and has its own article for it.
Search Apple Support for Time Machine is slow, or use its Get suggestions tool to describe the problem.