How To Fix A Mac That Won’t Update macOS (2026)
You click Software Update on your Mac and the update fails, freezes on a progress bar or never appears.
Apple says these errors have many causes and are sometimes temporary, so a short set of checks usually clears them.
Work through the steps below in order, and keep Recovery for last.
Quick answer: what to try first
| What you see | Try this first | Where |
|---|---|---|
| Not enough storage message | Free up space, then try again | Storage settings on your Mac |
| Download or preparation error | Check your internet connection and retry | Wi-Fi or Ethernet |
| No update listed | Press Check for Updates, or confirm your Mac supports the release | System Settings > General > Software Update |
| Installer says damaged or could not be verified | Delete the installer, repair the disk, download again | Disk Utility in macOS Recovery |
| Install keeps failing | Install from macOS Recovery | Startup options |
Step 1: Open Software Update and check again
Start by looking at what your Mac is actually offering.
- Click the Apple menu and choose System Settings.
- Click General in the sidebar.
- Click Software Update.
- Wait for the check to finish, then click the button to update or restart now.
Apple says you can run the check again by clicking Check for Updates, pressing Command-R, or closing and reopening Software Update.
Why no update shows up
Software Update only lists releases that are compatible with your Mac model.
Apple says incompatible or unneeded updates are not shown, so a missing upgrade often means your Mac is too old for that release.
Apple publishes a compatibility list for each release.
Updates also come in two kinds, as the table shows.
| Type | Example from Apple | What changes |
|---|---|---|
| Minor update | macOS 26 to 26.4 | Stays within the installed major version |
| Major update | macOS 26 to 27 | Moves your Mac to a new version |
Step 2: Free up storage space
If the message says there is not enough storage, the installer needs more room before it can continue.
Apple lists this as its first fix for installation errors, and it does not name a required number of gigabytes.
Our guide to freeing up storage on a Mac walks through the options.
Step 3: Check your internet connection
The installer needs a stable connection to download macOS and to get firmware and other information for your Mac model.
If the connection drops, the download can fail or stall, so confirm the Mac is online before you try again.
If the Mac keeps losing its network, see how to fix Wi-Fi not working on a Mac.
Step 4: Let the install finish and do not interrupt it
While macOS installs, Apple says not to let the Mac sleep or close its lid.
The Mac may restart several times and show a progress bar or a blank screen along the way.
Give it time before you decide it has frozen, and enter your administrator login password if the Mac asks for it.
If the Mac never finishes starting, use our guide for a Mac that won’t turn on or start up.
Step 5: Start in safe mode before you update
Apple says that when you install through Software Update or the App Store, it might help to start up in safe mode first.
The steps depend on your chip. Choose Apple menu > About This Mac to see whether it lists Chip (Apple silicon) or Processor (Intel).
| Mac type | How to start in safe mode |
|---|---|
| Apple silicon | Shut down fully, hold the power button until Loading startup options appears, select a volume, hold Shift and click Continue in Safe Mode |
| Intel | Turn on or restart the Mac and hold Shift until the login window appears, then log in (you may need to log in twice) |
You should see Safe Boot in the menu bar, and holding Option and choosing Apple menu > System Information shows Boot Mode as Safe under Software.
Step 6: Repair the startup disk
If a downloaded installer is reported as damaged or could not be verified, Apple says to delete it first.
Then repair the startup disk with Disk Utility from macOS Recovery, and download the installer from Apple again.
You can skip this step if you just erased the startup disk with Disk Utility.
Step 7: Install from macOS Recovery
Installing from Recovery keeps other software from interfering, which is why Apple recommends it for stubborn failures.
On a Mac with Apple silicon, shut down, hold the power button until startup options load, click Options, then Continue.
On an Intel Mac, shut down, press the power button, and immediately hold Command and R until you see an Apple logo or a spinning globe.
Choose Reinstall macOS from the Recovery window and follow the prompts.
Apple says reinstalling macOS from Recovery does not remove your apps or personal data, though a backup is still advisable.
Which macOS version Recovery installs
| Mac and key | Version you may get |
|---|---|
| Apple silicon, Recovery | Current version of the most recently installed macOS |
| Intel, Command-R | Current version of the most recently installed macOS |
| Intel, Option-Command-R | Possibly the latest macOS compatible with your Mac |
| Intel, Shift-Option-Command-R | Possibly the version that came with the Mac, or the closest still available |
Recovery needs a broadband connection that uses DHCP over Wi-Fi or Ethernet, and Apple says captive-network logins, 802.1X security or PPPoE can prevent installation.
Download the full installer from Terminal
If Software Update will not download the release, Apple documents a Terminal command for macOS Catalina 10.15 or later.
Open Terminal and run softwareupdate –fetch-full-installer –full-installer-version followed by the version number you want.
If Terminal says the update was not found, that version is not available for your Mac, and softwareupdate –list-full-installers shows what is.
The installer saves to the Applications folder, where you open the one named Install followed by the version name.
If nothing works
Apple lists two last steps for persistent problems.
- Revive or restore firmware: rarely needed, and only for Macs with Apple silicon or the Apple T2 Security Chip.
- Erase your Mac: resets it to factory settings, so back up first.
If the problem persists after that, contact Apple Support.