How To Fix USB-C Or Thunderbolt Not Working On A Mac (2026)
When a USB-C or Thunderbolt port on your Mac seems dead, the port is often fine and the cause is a prompt, a cable, a hub or a power problem.
Apple has separate pages for devices the Mac does not recognize, for Thunderbolt devices and for the accessory approval setting on Mac laptops.
This guide puts those checks in order, starting with the two-minute ones.
Quick answer: what to try first
| What you see | Likely cause | First fix |
|---|---|---|
| A message says USB Devices Disabled or the device needs more power | The device asked for more power than the port gives | Reconnect it, try another port, bypass the hub |
| A prompt asks to allow the accessory | Apple silicon Mac laptop is waiting for your approval | Unlock the Mac and click Allow |
| The device charges but nothing else happens | Don’t Allow was chosen, so no data is sent | Change it in Privacy & Security > Accessories |
| A Thunderbolt device is silent | Wrong cable or a broken chain | Use a Thunderbolt cable and connect it directly |
| The device is missing in the Finder | The Mac may still see it in System Information | Check the Hardware list |
Reconnect the device and try another port
Apple’s first step for a device the Mac does not recognize is to disconnect it and connect it again.
Apple’s second step is to plug the device into a different port on the Mac.
This separates a bad port from a bad device, because a device that works in one port but not the other points to the port or the cable.
Bypass the hub and power it
Apple says drives, cameras, keyboards, hubs and other devices can request a limited amount of power from the Mac.
If the device is connected through a USB or Thunderbolt hub, connect it directly to the Mac.
If the hub is self-powered, make sure it is connected to an AC adapter.
These steps are Apple’s advice for the messages that say a device needs more power, that the operation cannot be completed or that USB Devices Disabled.
Approve the accessory when the Mac asks
On Mac laptops with Apple silicon, macOS asks whether to allow a new or unknown USB accessory, Thunderbolt accessory or SD card to connect.
If the Mac is locked, you must unlock it before you can allow the accessory.
Apple says that if the Mac has been locked for 3 or more days, you may need to unlock it to use a previously allowed accessory again.
Choosing Don’t Allow stops the Mac from recognizing the accessory or giving it access to your data, and you are asked again the next time you connect it.
Change the Allow accessories to connect setting
- Choose Apple menu > System Settings.
- Click Privacy & Security.
- Scroll down and click Accessories.
- Use the menu next to Allow accessories to connect to pick an option.
| Option | What it does |
|---|---|
| Always ask | You approve every accessory, every time |
| Ask for new accessories | You approve new accessories the first time they connect (the default) |
| Automatically allow when unlocked | Accessories are approved when they connect to an unlocked Mac |
| Always allow | All accessories are approved automatically |
Apple says this setting applies only to Mac laptops with Apple silicon.
Why a device charges but does not work
Apple’s port guide says Allow transmits both power and data, while Don’t Allow lets the accessory charge but blocks data.
That explains a phone or drive that gets power from the Mac yet never shows up.
Apple suggests Allow is generally fine for your own devices and Don’t Allow is the better choice for public charging stations.
Using the Mac with the lid closed
Apple says to allow an external display, a mouse and a keyboard to connect first.
After that, you can use the Mac with the lid closed, including in a docking station, and allow other accessories without opening the lid.
Check the cable and adapter
Apple says to use the correct cable for each port, or an adapter if you do not have one.
For a Thunderbolt device, Apple warns not to use a Mini DisplayPort cable, and says to use a Thunderbolt cable, which has a Thunderbolt icon on the connector.
Apple also lists adapters for the Thunderbolt or USB-C port when you need to reach Thunderbolt 2 devices or DVI, HDMI or VGA displays.
Check a chain of Thunderbolt devices
- Disconnect the device from the chain and connect it directly to the Mac.
- Make sure every other device in the chain has its own power cord plugged in.
- Check that the device connected directly to the Mac has power too, if it needs a power cord.
- If a Mini DisplayPort device is in the chain, put it at the end and use a Mini DisplayPort cable for it.
Apple also says to install any software that came with the device and check the maker’s site for the latest version.
See whether the Mac detects it
Hold the Option key and choose Apple menu > System Information, then look for the device under Hardware.
If it appears there but still does not work, Apple says to check the device’s own documentation.
If it does not appear at all, the cable, the port or the device is the next suspect.
Restart the apps, then the Mac
Quit and reopen any app that uses the device.
If that does nothing, restart the Mac and connect the device again.
Which port is which
| Port | What Apple says it connects |
|---|---|
| USB-C | A USB device, Thunderbolt device or Mini DisplayPort display, depending on the port; no icon |
| Thunderbolt 3, Thunderbolt/USB 4, Thunderbolt 4 and Thunderbolt 5 (USB-C) | Same USB-C shape; USB devices, Thunderbolt devices or Mini DisplayPort displays |
| Thunderbolt and Thunderbolt 2 | Thunderbolt devices or a Mini DisplayPort display |
| USB-A | USB 3 or USB 2 devices |
Apple’s Identify the ports on your Mac article shows which ports your model has.
Related Mac guides
If a drive is the problem, see our guide to an external drive not showing up on a Mac.
If a screen is the problem, see our guide to a Mac not detecting an external display.
If the Mac itself is behind on software, see our guide to a Mac that will not update macOS.
When to contact Apple
Apple says to contact Apple Support if the problem continues after you reconnect the device, try another port, bypass the hub and power the hub.
If the issue is with a third-party device, Apple says to contact that device’s maker.