How To Fix A Mac Screen That Is Flickering Or Black (2026)

A Mac screen that flickers or turns black is often asleep, out of power or fed by a poor cable, and not broken.

Apple has separate support pages for a black screen, for a display that does not look right and for an external display that stays dark.

This guide combines them, starting with the checks that take seconds.

Quick answer: match the symptom to the fix

SymptomLikely causeFirst fix
Screen goes black and returns on a keypressThe Mac or display is asleepPress a key or click the trackpad
Laptop screen black, not asleepThe Mac is out of powerConnect the power adapter
Display flickersPoor cables or nearby interferenceUse good cables and move other electrical devices away
External display darkLoose cable, low brightness or not detectedReseat cables and choose Detect Displays
Blurry pictureDisplay not detected or a scaled resolutionDetect Displays, then try the native resolution

Wake the Mac or display first

Apple says the screen goes black when the Mac or display goes to sleep to save energy.

Press a key, or click or tap the mouse or trackpad, and the screen should come back.

The display wakes faster than the Mac, so Apple suggests setting the display to sleep before the Mac.

Check whether a Mac laptop is out of power

If the screen goes black but the Mac is not asleep, Apple says a laptop may be out of power.

  1. Connect the power adapter to the Mac and to a power outlet.
  2. Disconnect all devices from the Mac except the power adapter.
  3. Hold down Command and Control, then press the power button to restart the Mac.
  4. Let the battery charge to at least 10 percent before you reconnect devices.

The battery icon in the menu bar shows charging while the battery fills and full when it is done.

If the Mac will not turn on at all, Apple points to a separate support article, and we cover it in our guide to a Mac that will not turn on.

Turn the brightness up

A display that looks black may only be dim.

On an Apple keyboard or display, press the Brightness Up key, or use Apple menu > System Settings > Displays.

On a non-Apple display, use its built-in buttons and menu instead.

Fix a flickering display

Apple’s page for a display that does not look right gives two flicker checks.

  • Make sure the Mac and display are connected with good-quality cables and adapters.
  • Check for interference from a nearby power line, fluorescent light, radio, microwave oven, another computer or other electrical device.

If a device is the culprit, move it away, or move your Mac and display.

Reseat the cables on an external display

Apple’s external display page lists loose or unsuitable cables among the reasons for a dark screen.

  1. Reseat the display’s power and video cables at both ends.
  2. Connect the display directly to a port on the Mac and bypass any hub or dock.
  3. On a closed-lid laptop, connect power and attach an external keyboard and mouse.

Thunderbolt or USB-C adapters must support DisplayPort Alt Mode, Thunderbolt 3 or Thunderbolt 4.

Force the Mac to detect the display

  1. Unplug the display’s power and video cable, wait, then reconnect them.
  2. Sleep and wake the Mac, or close a laptop lid for a few seconds and reopen it.
  3. Open Apple menu > System Settings > Displays, hold Option and click Detect Displays.
  4. Restart the Mac.

If the Mac will not restart, hold the power button for about 10 seconds, then press it again to turn it on.

Our guide to a Mac not detecting an external display goes through that case further.

SettingWhere to find it
BrightnessBrightness Up key, or Apple menu > System Settings > Displays
Detect DisplaysApple menu > System Settings > Displays, then hold Option
Resolution, refresh rate and arrangementApple menu > System Settings > Displays

Approve the display on Apple silicon laptops

On Apple silicon laptops, the Mac may be waiting for you to approve the accessory.

If a prompt appears, allow the display to connect, because the screen stays dark otherwise.

Lower the resolution or refresh rate

A resolution or refresh rate that is too high for the cable, adapter or Mac can leave the screen dark.

What limits the displayWhat to check
Mac modelHow many displays and which resolutions and refresh rates it supports
DisplayThe modes the display itself supports
Cable or adapterWhether it can carry the resolution and refresh rate
Other connected displaysThey share the Mac’s limits

Lower the resolution or refresh rate to something your cable, adapter and Mac all support.

Sharpen a blurry picture

For a blurry display, Apple says to confirm the Mac has detected it in Apple menu > System Settings > Displays.

Press the Option key to reveal the Detect Displays button, then click it.

Use the display’s native resolution for the sharpest image, because a scaled resolution can look softer.

Install macOS updates

Apple says the latest macOS updates can include firmware updates for Apple displays.

For a non-Apple display, check the manufacturer’s website for newer firmware.

If the update itself fails, see our guide to a Mac that will not update macOS.

Bright or dark spots are a different problem

Bright or dark spots on a flat-panel or notebook screen may be pixel anomalies.

If you suspect an unusually high number on an Apple display, Apple says to take it to an Apple Authorized Service Provider.

When to contact Apple

If none of the steps help on an Apple display, contact an Apple Authorized Service Provider.

Apple says not to attempt to repair the display yourself and that damage you cause is not covered under warranty.

Sources

Leave a Reply

Your email address will not be published. Required fields are marked *