How To Fix An External Drive Not Showing Up On A Mac (2026)

You plugged in an external hard drive, SSD or USB stick and nothing showed up on your Mac.

Most of the time the drive is fine and the Mac is simply hiding it, blocking it, or not getting a good connection.

The steps below run from the quickest checks to Disk Utility repairs and should take about 10 to 15 minutes.

Quick answer: where to look first

SymptomTry this firstWhere
Nothing on the desktopLook in the Finder sidebar under LocationsFinder
Never on the desktop, but works in FinderTurn on External disks on the desktopFinder > Settings > General
Not in Finder at allCheck the cable, port and powerDrive and Mac
Allow prompt on a MacBookClick AllowAlert on screen
Not in Finder, may still be detectedTurn on Show All DevicesDisk Utility > View
Shows up but you cannot save filesCheck the format, Time Machine and permissionsFinder > File > Get Info

Step 1: Look in the right places

Apple says connected storage devices appear in the Finder sidebar under Locations.

Open Finder from the Dock and check the sidebar before you assume the drive is missing.

To make drives show on the desktop too, follow these steps.

  1. Open Finder and choose Finder > Settings from the menu bar.
  2. Click General and select the items you want on the desktop, such as External disks or Hard disks.
  3. Click Sidebar and select the items you want listed under Locations or Favorites.

Step 2: Check the cable, port and power

Apple lists external hard drives, thumb drives, USB drives and flash memory cards as supported storage, connected by Thunderbolt, USB or USB-C.

  • Cable: use the cable that came with the drive.
  • Adapter: if the connector does not fit your Mac, check the drive’s documentation for the right adapter.
  • Power: check the cable, connections and power on an external drive that has its own power supply.
  • Card slot: if your Mac has no SDXC slot, use a card reader for memory cards.

Unplug the drive and plug it back in after each change.

Step 3: Allow the drive on an Apple silicon MacBook

On a Mac laptop with Apple silicon, an alert asks whether to allow a new USB accessory, Thunderbolt accessory or SD card.

If you click Don’t Allow, the Mac will not recognize the accessory or give it access to its data, and it asks again next time.

To change the behavior, go to System Settings > Privacy & Security > Accessories and use the menu next to Allow accessories to connect.

The default setting is Ask for new accessories, and you must unlock the Mac before you can answer the alert.

If the Mac has been locked for 3 or more days, you may need to unlock it before a previously allowed accessory works again.

Step 4: Check whether Disk Utility can see the drive

A drive can be detected by the Mac but not mounted, so look for it in Disk Utility.

  1. Open Applications > Utilities > Disk Utility.
  2. Choose View > Show All Devices, if it is available.
  3. Look for your drive in the sidebar, where each storage device is listed with its containers and volumes.

If the drive is listed there but not in Finder, run First Aid on it in the next step.

Step 5: Run First Aid to repair disk errors

Apple recommends a current backup before you repair a storage device in case Disk Utility finds errors it cannot fix.

  1. In Disk Utility, select the last volume of your drive in the sidebar.
  2. Click First Aid, then click Run (or Repair Disk).
  3. Enter your administrator password if you are asked to unlock the disk.
  4. When it finishes, select the item directly above it and run First Aid again.
  5. Work up the list: each volume, then each container, then the device itself.

If a First Aid button is dimmed, skip that item.

What if the drive still does not appear?

Apple gives this order for a device that is missing from Disk Utility even with Show All Devices on.

  1. Shut down the Mac.
  2. Unplug any nonessential devices.
  3. Start the Mac and try the drive again.
  4. For an external drive, check the cable, connections and power once more.

If it still does not appear, Apple says the Mac or the storage device may need service.

Which drive formats work on a Mac?

Open the drive’s Get Info window to see its format: select the drive in Finder and press Command-I.

FormatTypeMac can write to it?
APFSMacYes
Mac OS ExtendedMacYes
MS-DOS (FAT)Windows-compatibleYes
ExFATWindows-compatibleYes
NTFSWindowsOften read-only, since Disk Utility does not support NTFS

If the format is not on the list, you can erase and reformat the drive in Disk Utility.

Erasing permanently deletes everything on the drive, so copy your files off first.

Why can’t I save files to my external drive?

If the drive shows up but your Mac cannot write to it, Apple points to five possible causes.

CauseFix
Not enough free spaceDelete or compress files on the drive
Unsupported format, often NTFSCheck Get Info, then reformat in Disk Utility if needed
Drive used for Time MachineUse a different drive for files, or stop using this one for Time Machine
Ownership settingsSelect Ignore ownership on this volume in Sharing & Permissions
Disk errorsRun First Aid, then erase and reformat if errors cannot be repaired

For the ownership fix, select the drive, choose File > Get Info, open Sharing & Permissions at the bottom, and tick the box.

If the option is locked, click the lock icon and enter an administrator password.

How to eject the drive safely

Eject the drive before you unplug it so you do not leave files half-written.

  • Select the drive and choose File > Eject.
  • Or click the Eject button next to its name in the Finder sidebar.
  • Or drag the drive on the desktop to the Trash.

If ejecting fails, another app or user may be using files on the drive.

Low on space on the Mac itself? See how to free up storage on a Mac.

If the Mac will not start at all, try fixing a Mac that will not turn on or start up.

Moving photos from an iPhone to a drive is covered in transferring iPhone photos to a USB or external drive.

Official sources

Leave a Reply

Your email address will not be published. Required fields are marked *