How To Fix A Mac Not Detecting An External Display (2026)
You plugged in a monitor, TV or projector and your Mac is acting like nothing is there.
This is usually a cable, adapter, port or setting problem, not a dead display.
Work through the steps below in order and most setups come back in about 10 minutes.
Quick answer: what to try first
| What you see | Try this first | Where |
|---|---|---|
| Display not listed at all | Hold Option and click Detect Displays | System Settings > Displays |
| Display is dark or black | Check the power and video cable at both ends | Display and Mac ports |
| Dark only on a MacBook | Allow the display when the Mac asks | System Settings > Privacy & Security > Accessories |
| Dark with the lid closed | Plug in power and use an external keyboard and mouse | Mac and display |
| Picture is low resolution | Check the cable or adapter supports your resolution and refresh rate | System Settings > Displays |
Step 1: Make your Mac detect the display
Your Mac normally finds a powered, properly connected display on its own, but you can force a new search.
- Click the Apple menu and choose System Settings.
- Click Displays in the sidebar (you may need to scroll down).
- Press and hold the Option key.
- Click the Detect Displays button that replaces the Night Shift button.
If the display still does not appear, move on to the cable checks below.
Step 2: Check the cable, port and power
Apple points out that different ports can look similar, so confirm the cable is in the right port.
- Power: make sure the display’s own power cable is firmly connected.
- Video cable: unplug it from the Mac and the display, then plug it back in.
- Right cable: use the cable your display is designed for, or one that does not need an adapter.
- Hub or dock: if the display goes through one, connect it straight to a port on the Mac instead.
Third-party displays can also need a specific connection method, so check the manual that came with the display.
Step 3: Use an adapter that supports video
A USB-C or Thunderbolt adapter only works if it can carry video.
Apple says an adapter should support DisplayPort Alt Mode, Thunderbolt 3 or Thunderbolt 4.
The cable or adapter must also support your display’s resolution and refresh rate, or the screen can stay dark or run at a lower setting.
Apple has a separate article on adapters for Thunderbolt 4, Thunderbolt 3 and USB-C ports if you are not sure which one you need.
Why is the display still dark? Check how many displays your Mac supports
A display stays dark when you connect more external displays than your Mac can drive at once.
The limit varies by Mac model, and the resolution and refresh rate of each connected display count toward it.
Open the Apple menu, choose System Settings, click Help in the menu bar, pick your Mac’s name followed by Specifications, and scroll to Display Support or Video Support.
Apple also publishes a spec page for each Mac family:
| Mac | Apple support page |
|---|---|
| MacBook Pro | support.apple.com/en-us/101571 |
| MacBook Air | support.apple.com/en-us/122212 |
| Mac mini | support.apple.com/en-us/102194 |
| Mac Studio | support.apple.com/en-us/101910 |
| iMac | support.apple.com/en-us/108054 |
| Mac Pro | support.apple.com/en-us/101829 |
When you connect several displays, Apple suggests connecting the highest-resolution one first.
Step 4: Allow the display to connect on a MacBook
On a MacBook with Apple silicon, the Mac may ask whether to allow the display to connect.
If you click Don’t Allow, the display stays dark, and you are asked again the next time you connect it.
You can control this under System Settings > Privacy & Security > Accessories, using the menu next to Allow accessories to connect.
| Setting | What it does |
|---|---|
| Always ask | You approve every accessory every time |
| Ask for new accessories | You approve a new accessory the first time it connects (the default) |
| Automatically allow when unlocked | Accessories are approved when connected to an unlocked Mac |
| Always allow | All accessories are approved automatically |
If the Mac is locked, you must unlock it before you can answer the prompt.
Step 5: Fix a blank display with the MacBook lid closed
If your desktop does not show on the external display, Apple lists these steps for notebooks.
- Close the notebook’s lid to put it to sleep.
- Plug the power adapter into the Mac and a wall outlet.
- Reconnect the Mac to the external display.
- Attach a USB keyboard, mouse or trackpad, or turn on your wireless ones.
- Wait a few seconds, then press a key or move the mouse to wake the Mac.
If a wireless device is not paired yet, Bluetooth Setup Assistant opens so you can pair it.
On an Apple silicon MacBook, allow an external display, mouse and keyboard to connect first before you rely on closed-lid use.
Step 6: Sleep, restart and update
These quick resets clear most one-off detection glitches.
- Reconnect: disconnect the display from the Mac and from its power source, then connect both again.
- Sleep and wake: put the Mac to sleep and wake it, or close and reopen a laptop lid after a few seconds.
- Restart: choose Restart from the Apple menu, or hold the power button for about 10 seconds if it will not restart, then press it again to turn on.
- Update: install the latest macOS updates, which can also deliver firmware updates for Apple displays.
For a non-Apple display, check the manufacturer’s website for firmware instructions.
Step 7: Check the display’s brightness
A screen that is detected but looks black may simply have its brightness turned all the way down.
On an Apple display or keyboard, press Brightness Up or use the brightness control in System Settings > Displays.
On a non-Apple display, use the display’s own buttons and on-screen menu.
If you cannot raise it and the screen stays dark, the display may not be getting power or may be faulty.
How do I fix a blurry or low-resolution external display?
Settings above what your Mac, display, cable and other displays can handle cause a dark or reduced picture.
If the screen went dark right after you changed resolution or refresh rate, go back to System Settings > Displays and pick a lower setting.
For a blurry picture, try a different resolution, because the display’s native resolution is often sharper than a scaled one.
Some third-party displays also have sharpness controls in their built-in menus.
What to do if the display still is not detected
Try the display with a different cable, then on a different Mac, to see whether the display or the Mac is at fault.
If the display works on another computer, check your Mac’s startup health with our guide to a Mac that will not turn on or start up.
For a screen that flickers off and on, see monitor goes black for a second then comes back.
Apple’s advice for anything else is to contact the display’s vendor.
Official sources
- If your Mac doesn’t recognize an external display (Apple Support)
- If your external display is dark or low resolution (Apple Support)
- Allow USB and other accessories to connect to your Mac (Apple Support)
- If you can’t see your Mac desktop on an external display (Apple Support)
Related: fix Wi-Fi not working on a Mac.