How To Fix Wi-Fi Not Working Or Connecting On A Mac (2026)

Your Mac shows a Wi-Fi connection but pages will not load, or it refuses to join your network at all.

Apple splits this into two problems, a Mac that cannot join the network and a Mac that joins but cannot reach the internet.

The steps below follow Apple’s support pages, so work through them in order and test after each one.

Quick answer

Work out which problem you have first, because the fixes are different.

What happensStart with
Mac will not join the networkCheck the password, security type and range, then forget and rejoin the network
Joined, but no internetRestart the Mac, renew the DHCP lease, then restart the router
Wi-Fi is missing from System SettingsUse the Network settings steps in Apple’s Wi-Fi guide
Only one network failsCheck the date and time, VPN software and the router firmware

Make sure Wi-Fi is on and in range

Use the Wi-Fi status menu in the menu bar to confirm Wi-Fi is turned on.

Move your Mac within range of the router, because Apple gives a typical range of about 150 feet that shrinks with walls and other obstacles.

If Wi-Fi does not appear in Network settings at all, Apple has a separate article for that case, linked from its Wi-Fi help page.

Check the password and security type

Confirm that you are typing the correct password and that you know the network’s type of wireless security.

For a hidden network, re-enter the network name and password exactly as the router has them.

If the network uses access control, ask the network administrator to confirm your Mac’s MAC address is registered.

Restart the Mac

Apple says a restart can give your Mac a new internet address from the network.

Choose the Apple menu, then Restart, and test the connection once the Mac is back.

If you would rather not restart, the next section renews the address without one, which gives the same fresh start from the network.

Renew the DHCP lease

If the Mac is joined but has no internet, you can renew its address without restarting.

  1. Click the Apple menu and choose System Settings.
  2. Click Network in the sidebar, scrolling down if needed.
  3. Select Wi-Fi, then click Details.
  4. Select TCP/IP, then click Renew DHCP Lease.
  5. Click OK.

Forget the network and join again

Forgetting a network clears its saved settings so you can set it up from scratch.

  1. Click the Apple menu and choose System Settings.
  2. Click Wi-Fi in the sidebar.
  3. Click Details next to the connected network, then click Forget This Network.
  4. Open the Wi-Fi menu and join the network again with its password.

To remove a network you are not connected to, click Advanced in the Wi-Fi settings, click the More button next to it under Known Networks, and choose Remove From List.

Use Wi-Fi Recommendations and Wireless Diagnostics

Your Mac can look for the problem itself.

ToolHow to open it
Wi-Fi RecommendationsClick the Wi-Fi icon in Control Center or the menu bar and choose Wi-Fi Recommendations, if it appears
Wireless DiagnosticsHold Option, click the Wi-Fi icon, then choose Open Wireless Diagnostics

Apple says Wi-Fi Recommendations is not available for personal hotspots or WPA Enterprise and WPA2 Enterprise networks.

Wireless Diagnostics analyzes your wireless environment and shows its findings in a window.

Wi-Fi settings worth checking

Click Details next to your network in System Settings, then Wi-Fi, to see the settings Apple lists for a connection.

SettingWhat Apple says it does
Automatically join this networkConnects to the network whenever it is available
Private Wi-Fi addressReduces tracking by network operators, with Off, Fixed or Rotating options
Low data modeReduces data usage over the Wi-Fi network
Limit IP address trackingHides your IP address from known trackers in Mail and Safari
TCP/IPConfigures IPv4 and IPv6, or renews the DHCP lease
DNSConfigures DNS servers and search domains
ProxiesConfigures internet proxies

If a work or school network needs a proxy or custom DNS, wrong values in those panes can leave a Mac joined but unable to load pages.

Apple also lets an administrator require a password to change networks or turn Wi-Fi on or off, found under Advanced in the Wi-Fi settings.

The Known Networks list under Advanced lets you turn off auto-join for a network or remove it entirely.

Check the network status

Open System Settings and click Network in the sidebar to see how your Mac views the connection.

Apple says a working network service shows a green indicator and the word Connected.

Click the service to see more details about the connection.

Check the date, VPN and security software

An incorrect date and time can stop a Mac from reaching the internet, so make sure both are right.

VPN apps and other software that monitors or changes network traffic can block internet access, so turn them off temporarily to test.

If you can reach the internet from a different Wi-Fi network, Apple says you can use it to update macOS.

Check the router and modem

Install the latest firmware from the router’s manufacturer, then restart the router.

Unplug modems, hubs and routers for a couple of minutes, plug them back in, and wait until they finish starting up.

Check the indicator lights, and if a light stays off, see the device’s documentation or contact your internet provider.

Apple also publishes recommended settings for Wi-Fi routers and access points that you can compare with your router’s settings page.

If your router is the problem, our guides on a TP-Link router with no internet and an offline eero network may help.

If other networks work or nothing works

Test your Mac on another network, such as a phone hotspot.

If it connects there, or you are unsure, contact your internet provider or network administrator about an outage or a network problem.

Apple also offers a Get suggestions link on its support page that asks about your issue and recommends next steps.

If the Wi-Fi works but a printer will not, see how to add a printer to a Mac by IP address.

Apple sources

Leave a Reply

Your email address will not be published. Required fields are marked *