How To Fix AirPods Not Connecting To iPhone Or Mac (2026)

Apple AirPods that will not connect are usually a pairing or software problem, not a dead pair.

This guide follows Apple’s own steps, in order, for iPhone, iPad, Mac and Android.

Most people are connected again after the lid reset or a fresh pairing.

Quick answer: what to try first

SymptomTry this first
AirPods missing from the Bluetooth listClose the case lid, wait 15 seconds, then reopen it near your device
AirPods show up but will not connectTurn Bluetooth off and on, then put the AirPods in pairing mode
Sound still plays from the phone or Mac speakerPick the AirPods from the AirPlay or Sound output list
Pairing mode never startsUse the right gesture for your model, then reset the AirPods
Nothing worksReset the AirPods, then pair them again as new

Update your device and charge both earbuds

Apple says to start by updating your iPhone or iPad to the latest iOS or iPadOS, or your Mac to the latest macOS.

Next, put both AirPods in the charging case and make sure both are actually charging.

A flat earbud is a common reason the pair looks half connected, so give them a few minutes before you move on.

Make sure Bluetooth is on

Bluetooth has to be on for AirPods to appear at all.

  • On an iPhone or iPad, open Settings, then Bluetooth.
  • On a Mac, open the Apple menu, then System Settings, then Bluetooth.

Toggle the switch off and on once if it already shows as on.

Wear the AirPods and check the AirPlay list

Take the AirPods out of the case and put them in your ears.

Then open Control Center on your device and tap or click the AirPlay button.

If your AirPods are listed, select them, play some audio and turn the device volume up.

If they are missing, or listed but refusing to connect, move on to the next step.

Reset the connection with the case lid

Put both AirPods back in the case, close the lid and wait 15 seconds.

Open the lid again with the case next to your device and see whether the setup card appears.

Put the AirPods in pairing mode

The gesture that starts pairing depends on your model, and using the wrong one is a frequent reason nothing happens.

ModelHow to start pairing
AirPods 4 (both versions) and AirPods 5 (both versions)Double-tap the front of the case until the status light flashes white
AirPods Pro 3Double-tap the front of the case until the status light flashes white
All other modelsPress and hold the setup button on the back of the case until the status light flashes white

With the light flashing white, hold the open case with the AirPods inside next to your iPhone or iPad and follow the on-screen prompts.

Pair the AirPods with a Mac manually

AirPods set up on an iPhone signed in to the same Apple Account as your Mac should connect on their own.

If they do not, click Control Center in the menu bar, click Sound and choose your AirPods.

For a manual pairing, follow these steps.

  1. Open the Apple menu, choose System Settings, click Bluetooth and make sure it is on.
  2. Put both AirPods in the case and open the lid.
  3. Start pairing mode with the gesture from the table above.
  4. Click Connect next to your AirPods under Nearby Devices.
  5. If sound still comes from the Mac speakers, open Control Center, click Sound and pick the AirPods as the output.

Connect AirPods to Android or another Bluetooth device

AirPods work as a Bluetooth headset for listening and calls on non-Apple devices, but Siri is not available.

  1. Turn Bluetooth on; on Android, go to Settings, tap Connections, then Bluetooth.
  2. Open the lid with the AirPods in the case.
  3. Use the pairing gesture for your model.
  4. Select your AirPods when they appear in the device list.

Minimum macOS versions for each model

A Mac that is too old for your AirPods will not pair them properly, so check this table.

AirPods modelMinimum macOS
AirPods 2macOS Mojave 10.14.4
AirPods 3macOS Monterey
AirPods 4macOS Sequoia
AirPods Pro (1st generation)macOS Catalina 10.15.1
AirPods Pro 2 (Lightning)macOS Ventura
AirPods Pro 2 (USB-C)macOS Sonoma
AirPods Pro 3macOS Tahoe

Reset the AirPods if they still will not connect

A reset wipes the old pairing, so Apple tells you to forget the AirPods first.

ModelsReset steps
AirPods 1, 2, 3, Pro 1 and Pro 2Case closed for 30 seconds, forget the AirPods in Settings, Bluetooth, open the lid, hold the setup button for about 15 seconds until the light flashes amber, then white
AirPods 4, AirPods 5 and AirPods Pro 3Case closed for 30 seconds, forget the AirPods, open the lid, then double-tap the case, double-tap again when the light flashes white, and a third time when it flashes faster, until it flashes amber, then white

To forget them, go to Settings, then Bluetooth, tap the More Info button next to your AirPods under My Devices and choose Forget This Device.

When the light flashes amber and then white, reconnect by following the on-screen steps.

What to do if the light does not flash white

Put the AirPods back in the case, close the lid and wait 20 seconds.

Open the lid and repeat the hold or the triple double-tap until the light flashes amber, then white.

Then, with the lid open, place the AirPods near your device and follow the prompts.

Why AirPods jump between your Apple devices

AirPods 2 and later, and AirPods Pro, can switch automatically between a Mac on macOS Big Sur or later, an iPhone on iOS 14 or later and an iPad on iPadOS 14 or later.

Every device must use the same Apple Account with two-factor authentication.

If audio keeps landing on the wrong device, choose the AirPods manually from that device output list.

When to contact Apple

If a reset and a fresh pairing do not work, the fault may be in the AirPods or the case.

Apple points owners of damaged AirPods to its service route, and out-of-warranty fees may apply.

You can describe the problem at getsupport.apple.com to get suggested next steps.

Related TDG guides: AirPods Pro 3 static or one side out, iPhone 17 Bluetooth not pairing and Apple Watch not charging.

Official sources

Leave a Reply

Your email address will not be published. Required fields are marked *