How To Fix An Epson Ink Pad End Of Service Life Error (2026)

When an Epson printer says an ink pad is at the end of its service life, it is reporting a worn internal part and not a blocked cartridge.

Epson treats this as normal wear, and the pad is not something an owner can swap.

What you can do depends on which of two wording versions your printer shows, so start with the table below.

Quick answer: which message do you have?

Message on the screenWhat it meansWhat to do
Borderless printing ink pad is nearing the end of its service lifeA warning, and the pad is not user-replaceableDismiss it to keep printing, and contact Epson
Borderless printing ink pad has reached the end of its service lifeThe pad is used upTurn the printer off and contact Epson
Parts inside the printer have reached the end of their service lifeInternal ink pads, service neededContact Epson about repair options
Maintenance Box is at the end of its service lifeA different, replaceable partReplace the maintenance box

What the ink pad does

Epson describes ink pads as porous pads inside the printer that collect ink which is not used on the page.

Ink lands on them during setup, during cleaning cycles, and during borderless printing.

The wear builds up with use, so the printer stops at a set point.

Epson calls this normal operation and not a fault.

Why the printer stops instead of carrying on

Epson says the printer halts to prevent ink leaks.

A leak could damage the surroundings, and in the worst case could cause an electrical fault, fire, or electric shock.

The pad is not a part you can clear, dry out, or reset from the printer menus.

If the message says nearing the end

This version stays on the screen until the pad is replaced.

The wording on your printer’s page names the button that lets you keep printing, and Epson’s pages differ by model.

Epson pageNearing the endReached the end
XP-8700Message says it is not user-replaceable; select OK to resume printingTurn the product off and contact Epson
XP-5200Select Dismiss to resume printing; contact EpsonTurn the product off and contact Epson
ET-3843Select Dismiss to keep printing; contact EpsonTurn the product off and contact Epson; scanning still works

All three pages word the on-screen message the same way and mention the borderless printing ink pad.

Contact Epson at the same time, because the pad cannot be replaced at home.

If the message says it has reached the end

Epson’s instruction here is to turn the product off and contact Epson for support.

For the ET-3843, Epson adds that tasks which do not use ink, such as scanning, still work.

Epson’s European guide says that for the borderless ink pad message you can still print with a border in the meantime.

Treat that as a workaround for the borderless-pad wording only, since the messages differ by model.

If the message says parts inside the printer

This wording covers the sealed internal ink pads as a whole.

Common versions Epson lists include Epson Service required, Waste ink pad full, and Ink pad at end of service life.

Epson says the pads are internal and sealed, and that its inkjet printers are not user-serviceable.

Its only instruction is to contact Epson for information about repair options.

Maintenance box: the part you can replace

If your printer names a Maintenance Box, you have a different part from the ink pad.

Epson says the maintenance box collects surplus ink from printing and print head cleaning.

PartUser-replaceable?Covered by warranty?
Borderless ink padNoReplacement or exchange is covered under the standard warranty (ET-3843 page)
Maintenance BoxYesNo, Epson says it is a user-replaceable part

When the box is full, Epson’s ET-3850 page says you cannot print or clean the print head until you replace it, though scanning still works.

Safe handling for a maintenance box

Epson’s pages list a few rules for the box.

  • Do not touch the green chip on the side.
  • Do not tilt the old box until it is sealed in the bag supplied with the new one.
  • Do not replace it while the printer is printing.
  • Do not reuse a box that was removed and left out for a long time.
  • Use a genuine Epson box for your exact model.

Epson also says a box installed in one printer cannot be used in another.

Dispose of the old box according to local requirements, and Epson says used boxes can be returned to it through its recycling page.

Reduce how fast ink collects

Because cleaning cycles send ink to the pads, Epson’s advice not to run head cleaning more than necessary also helps here.

Epson’s nozzle-check guide says cleaning uses ink and may not be possible when ink is low.

If you only need to fix faint prints, our guide on printing with only color ink when black is empty covers a related ink problem.

Warranty and when to contact Epson

The ET-3843 page says that if the product is under its standard warranty, replacing the ink pad or exchanging the product is covered.

If it is out of warranty, Epson says to contact it for more information.

Epson’s European page adds that it will not repair or replace a product when the problem comes from external damage, use outside specification, non-Epson parts or consumables, or modifications.

Use Epson’s support site for your country to start a repair or warranty check.

If a different Epson problem is stopping prints, see our guide to Epson printers that show offline.

Official Epson sources

Leave a Reply

Your email address will not be published. Required fields are marked *