|

Turn Off Windows Protected Print Mode For Canon Printers (2026)

If your Canon printer or its driver stopped working after Windows protected print mode was switched on, the Canon driver was probably removed on purpose.

Microsoft says this mode deletes third-party print drivers and lets the PC print only through its built-in method.

This guide shows how to check the setting, turn it off in Windows 11, and get your Canon driver back.

Quick answer: turn off Windows protected print mode

StepWhere
1. Open the settingStart > Settings > Bluetooth & devices > Printers & scanners
2. Find the switchScroll to Printer preferences, then Windows protected print mode
3. Turn it offSelect Turn Off, then Yes
4. Restore the driverRemove the Canon printer and install it again with the Canon driver

Canon says you need to be signed in as an administrator to change this setting.

What protected print mode does to Canon drivers

Windows protected print mode makes the PC use only Windows Ready Print.

Microsoft says printers that use third-party drivers are uninstalled when the mode is enabled, and the driver is deleted from the print driver store.

Canon describes the same behavior: the mode limits printing to Microsoft’s built-in IPP Class Driver and blocks other drivers from installing.

Canon also says its own drivers remain available and supported.

Check which driver your Canon printer uses

Canon gives these steps for Windows 11.

  1. Open Settings.
  2. Select Bluetooth & devices, then Printers & scanners.
  3. Select your printer and open Printer properties.
  4. On the Advanced tab, read the Driver field.

If it says Microsoft IPP Class Driver, Windows is using the generic driver instead of the Canon one.

What can change with the generic driver

Canon lists several things that may be affected when the IPP Class Driver replaces its own driver.

AreaWhat Canon says may change
Print settingsFewer paper types and sizes, fewer layout and finishing options, less control over print quality
Device monitoringInk or toner levels, maintenance cartridge status, warnings and health details may not appear
Canon softwareEasy-PhotoPrint Editor and PosterArtist may not work correctly
Print qualityOutput quality may vary, so test important or specialized jobs first

Turn off Windows protected print mode

  1. Select Start, then Settings.
  2. Go to Bluetooth & devices, then Printers & scanners.
  3. Scroll down to Printer preferences.
  4. Under Windows protected print mode, select Turn Off.
  5. Select Yes to confirm.

Canon’s inkjet manual describes the same path and says the button then changes back to Set up.

Microsoft adds that you can install printers that are not compatible after the mode is off.

If the Turn Off button does not work

Microsoft says that if the mode was enabled through group policy, you cannot turn it off yourself.

On a work or school PC, contact your administrator.

What happens to your printers when you turn it off

Printer situationResult
Compatible printer that was installed with a third-party driverIt stays on Windows Ready Print unless you remove it and reinstall it with the mode off, which restores the original driver
Printer first installed with Windows Ready PrintIt was never uninstalled by the mode
XPS and FaxRemoved by the mode and reinstalled manually
Unsupported software printersNot restored automatically

Reinstall the Canon driver

  1. Remove the Canon printer in Settings, following our guide to removing a printer in Windows 11.
  2. Restart the PC.
  3. Install the Canon driver you downloaded from Canon’s website, or add the printer again with our Windows 11 add a printer guide.
  4. Check the Advanced tab again to confirm the driver name.

If a Canon laser driver will not install over USB, see our guide to the Canon Generic Plus driver install fix.

Turn off the Windows Ready Print preference

Canon says new installs can also prefer the generic driver through a separate switch.

  1. Sign in as an administrator.
  2. Go to Bluetooth & devices, then Printers & scanners.
  3. Switch Default install printers using Windows Ready Print from On to Off.
  4. Remove and reinstall the printer if needed, then restart.

In Group Policy, Canon points to Local Computer Policy, Administrative Templates, Printers, then Configure Windows Ready Print driver ranking, set to Disabled.

Bring back XPS and Fax

Microsoft says both are removed when the mode is turned on, and neither returns on its own.

  1. For XPS, open Start, search for Windows Features, select Microsoft XPS Document Writer, and select OK.
  2. For Fax, open Settings, then System, then Optional features, and check the box for Windows Fax and Scan.

Microsoft also says that compatible printers show a compatible-shield icon in Printers & scanners, so you can look for it before the mode is on.

Scanners under protected print mode

Microsoft says scanner features are unavailable on some devices while the mode is on.

It says only printing works unless the device is Mopria certified.

That is a reason to check scanning before you turn the mode on, and to turn it off if your Canon scanner stops responding.

Keep the mode on instead

Microsoft recommends the mode for added print security, and it is designed for Mopria certified printers.

Canon says most modern Canon printers support the Mopria standards, which you can check on the Mopria certified products list.

Canon also offers its Canon Print Assistant app in the Microsoft Store to add settings when the IPP Class Driver is in use.

ChoiceGood for
Mode off, Canon driverFull Canon settings, ink level display, Canon software and scanning
Mode on, IPP Class DriverMicrosoft’s added print security on a compatible Mopria certified printer

ARM and Snapdragon PCs

Canon says ARM-based Windows PCs such as Snapdragon devices generally lack Canon drivers.

Those PCs rely on the IPP Class Driver, so turning the mode off will not bring back a Canon driver there.

What Canon says about the timing

Canon says the mode is off by default, so Canon drivers can still be used for now.

It also says that starting July 2026, new printer installations will default to Windows Ready Print where supported.

Microsoft has not announced a mandatory transition date, according to Canon.

Sources

Leave a Reply

Your email address will not be published. Required fields are marked *