How To Fix A Brother Printer Not Connecting To Wi-Fi (2026)

When a Brother printer will not join your Wi-Fi, the quickest way to find out why is the error code on its WLAN Report.

Brother publishes a code-by-code list of causes and fixes, plus a separate checklist for setups that fail before any report is printed.

This guide turns those pages into a plain order of steps for a Brother machine that cannot connect to a wireless network.

Quick answer: what to try first

SituationFirst step from Brother
Wireless setup will not finishPower-cycle the router, then retry the setup
Setup fails a second timePrint the WLAN Report and read the error code
Not sure of the Wi-Fi passwordUse the label on the router or its manual; the default may be the maker name or model number
Router hides its network nameEnter the SSID and network key manually
Connected, but cannot print or scanCheck firewall rules and the ping test
Windows connection was interruptedUse the Network Connection Repair Tool

Restart the router and retry

Brother’s first instruction for a failed wireless setup is to power-cycle the wireless router and run the setup again.

For the TS-02 code, the same guidance is to unplug the router, wait about 10 seconds, and plug it back in.

Keep the printer close to the router while you retry, because Brother suggests moving the machine closer when the router is not detected.

Print the WLAN Report

If the setup fails again, Brother says to print the WLAN Report and check the error code on the printed page.

The report is the quickest way to tell a wrong password from a router setting the printer cannot use.

The codes below come from Brother’s page for the HL-L2460DW and related models, so other models may word them differently.

What the TS error codes mean

CodeCauseWhat Brother says to do
TS-01Wi-Fi is not enabledTurn on the WLAN setting and unplug any network cable
TS-02Router or access point not detectedConfirm it is on, move the machine closer, check MAC filtering, re-enter a manual SSID, restart the router
TS-03Network or security settings may be wrongVerify the SSID and the security details you selected
TS-04Authentication or encryption not supportedChange the router to a method the machine supports
TS-05SSID or network key incorrectRe-enter both, matching upper and lower case
TS-06Security information incorrectConfirm the key and methods, restart router and machine, turn off stealth mode
TS-07WPS router not detectedSet up WPS on both the machine and the router
TS-08More than one WPS router foundLeave WPS on for only one router, wait a few minutes, retry

Use a security type the printer supports

TS-04 means the router’s security setting is one the machine cannot use.

On the HL-L2460DW page, the supported methods are listed below.

MethodEncryption
WPA-PersonalTKIP or AES
WPA2-PersonalTKIP or AES
WPA3-PersonalAES
OpenWEP or none
Shared keyWEP

Change the router to one of these, then retry the connection.

Find and re-enter the Wi-Fi password

A wrong SSID or network key is behind TS-05 and TS-06, and Brother’s page says to match capital and small letters exactly.

The network key may be called the password, security key or encryption key on your router.

Brother says the router may carry default settings on a label, and the maker name or model number can serve as the default key.

If the router uses WEP with several keys, Brother says to use only the first WEP key.

Connect when the network name is hidden

A router in stealth mode does not broadcast its name, so the printer cannot find it by itself.

Brother says to enter the SSID and network key manually in that case, using the details from the router’s instructions.

For TS-06, Brother also says turning off the router’s Stealth Mode lets the machine connect.

Check the Wi-Fi band and channel

Brother’s TS-02 page for the HL-L3210CW says to use a 2.4 GHz network because 5 GHz SSIDs are not supported on that model.

Brother’s network page for its MFC-J series says that when a router’s 5 GHz channel is unsupported, you should change the router to a channel the machine supports and not leave it on Auto.

The supported channel list is in Brother’s document “Channels Supported by Brother Machines for 5 GHz Wi-Fi Networks” at support.brother.com/manuals.

Fix WPS setup problems

TS-07 appears when WPS was not started on both devices.

Start WPS on the machine and on the router, then try again.

TS-08 appears when two or more nearby routers have WPS active, so keep it on for just one and retry after a few minutes.

Allow the printer through MAC filtering

If your router only allows listed devices, the printer will not connect until its address is added.

Brother says to add the machine’s MAC address to the router’s allowed list.

Brother says the address can be found on the machine’s control panel and on the Network Configuration Report.

If it connects but will not print

A machine that joins the network can still fail to print or scan if security software blocks it.

Brother says to allow UDP ports 54925, 137 and 161 for network scanning on Windows, and UDP port 54926 for PC-Fax receive.

Brother also says to cancel any failed job still in the queue, and to use the Network Connection Repair Tool on Windows.

If printing still fails, see our guide to a Brother printer that will not print, or fixing a Brother printer that shows offline.

When to contact Brother

If the report keeps showing an error after the router settings check out, contact Brother.

Brother says technical help is available only by calling the support number for the country where the machine was purchased.

Model-specific answers are on the FAQs page for your model at support.brother.com.

Sources

Brother online user’s guides: Wireless and Network Troubleshooting (MFC-J series), Wireless LAN Report Error Codes (HL-L2460DW) and WLAN Report error codes (HL-L3210CW).

Leave a Reply

Your email address will not be published. Required fields are marked *