How To Fix Brother Wrong Paper Size Or Paper Size Mismatch (2026)

When a Brother printer shows Wrong Paper Size or Paper Size Mismatch, the paper in the tray is not the size the machine or your document expects.

Brother’s support pages treat it as a settings problem on one of three screens: the machine, the print driver and the app.

This guide goes through each one, for both laser and inkjet models.

Quick answer: what to check

WhereWhat to match to the paper in the tray
Machine screenThe paper size setting for that tray
Paper guidesSet to the indicator for the paper size
Print driverPaper Size and Media Type in Properties or Preferences
Your appThe paper size in Page Setup

What triggers the message

Brother’s pages for inkjet models give three causes.

  • The paper size set on the machine does not match the paper in the tray.
  • The paper is loaded in the wrong orientation for its size.
  • The tray’s paper guides are not set to the indicators for your paper size.

On laser models, Brother’s page is shorter and says the paper in the tray is not the correct size.

The wording on screen varies by model, and Brother lists it as Wrong Paper, Wrong Paper Size, Paper Size Mismatch or Size Mismatch.

Step 1: check the size on the machine

Start with the screen, because that is the setting the machine compares against the tray.

  1. Read the paper size selected on the screen.
  2. Compare it with the paper actually in the tray.
  3. If they differ, change the setting or load the paper that matches.

On a laser MFC-L2700DW, Brother’s menu path for non-touchscreen models is below.

Machine typeWhere to set the paper size
Laser, buttonsPress Menu, then General Setup, Paper, Paper Size
Laser, touchscreenPress Menu, then General Setup, Tray Setting
InkjetBrother’s pages do not name a menu, so use your model’s manual

Step 2: reload the paper and set the guides

For inkjet models, Brother says to load the paper in portrait position with the guides set to the indicators for that size.

  1. Pull the tray out and take the paper out.
  2. Reload it in portrait position.
  3. Slide the paper guides to the indicator marks for that size.
  4. Follow the on-screen instructions, or press Black (Mono) Start or Color (Colour) Start to continue.

On the MFC-L6900DW laser page, Brother adds that you should press Go or Retry after loading the right paper.

Models with a Paper button

Some small inkjet models have no menu for this, so Brother’s MFC-J1215W page uses a Paper button instead.

Lit LED (US and Canada)Size and type Brother lists
LTRLetter, plain paper
4″ x 6″4″ x 6″, other glossy paper
LTR and 4″ x 6″ togetherCustom size, set in Web Based Management

To set a custom size, Brother says to open Web Based Management, choose Print, then Paper Tray (Custom), pick the Paper Type and Paper Size, and click Submit.

Step 3: check the print driver and your app

If the message appears when you print from a computer, the computer side has to match the tray too.

Brother’s MFC-J680DW page calls the app’s paper size the most common cause.

  1. In your app, open File, then Page Setup, and check Paper Size.
  2. Open the print dialog and click Properties or Preferences.
  3. Choose the Media Type you are printing on, since the machine adjusts dot placement based on it.
  4. Choose the Paper Size, or define a custom size.

Brother says screens vary by operating system and model, so the names may differ slightly.

To open the driver’s settings on Windows, Brother’s HL-2270DW page says to open the Printers folder, right-click the Brother driver and choose Printing Preferences.

The Basic tab holds Paper Size, Orientation, Media Type and Paper Source.

Brother also warns that the application’s settings will usually override the printer driver’s, so check the print dialog in your software as well.

Wrong Paper #1 and #2, and the manual feed slot

On the MFC-J6920DW and related models, Brother’s message can read Wrong Paper, Wrong Paper #1 or Wrong Paper #2.

For those models Brother adds two details to the usual steps.

  • For Letter, Executive or A4 paper in the manual feed slot, load the sheet in landscape orientation.
  • In the driver, check Paper Source, and use Auto Select for the manual feed slot.

Envelopes and the manual feed slot have their own loading instructions on Brother’s site, so use your model’s page for those.

Step 4: clear the error if it stays on screen

On the same MFC-J680DW page, Brother says the message can stay after you fix the setting.

  1. Delete any remaining jobs from the print queue.
  2. Open and close the ink cartridge cover.

Brother says pressing Cancel only switches between the main screen and the error message, and does not clear it.

Our Windows 11 guide to clearing the print queue covers the first step.

Brother pages and the models they cover

The same fix appears on several support pages, so the table shows which model each one was written for.

Brother pageModelKey detail
Wrong Paper / Paper Size MismatchMFC-J680DWLists the driver and app steps
Paper Size MismatchMFC-J6940DWOrientation and guide indicators
Paper Size Mismatch / Size MismatchDCP-T510WPress Start to continue
Size mismatchMFC-L2700DWMenu, General Setup, Paper, Paper Size
Size mismatchMFC-L6900DWPress Go or Retry
Wrong Paper SizeMFC-J6920DWWrong Paper #1 and #2, manual feed slot
Change the paper size and paper typeMFC-J1215WPaper button and Web Based Management

Update size and type together

Brother’s L6900DW page says that whenever you load a different paper size and type, you should update both the paper size and the paper type settings on the machine or your computer at the same time.

That habit prevents most repeat messages for people who switch between letter, legal and photo paper.

If the message is about something else

Official Brother sources

Leave a Reply

Your email address will not be published. Required fields are marked *