How To Fix AirPods Microphone Not Working On Calls (2026)
If people cannot hear you on calls while your AirPods are in, the cause is usually a mute, a microphone setting, app permission, or a blocked microphone mesh.
Apple documents each of these in separate support pages, so this guide puts them in one checklist.
Work down the list in order, since the first few take only a few seconds.
Quick answer: causes and fixes
| Symptom | Likely cause | Fix, per Apple |
|---|---|---|
| Caller hears nothing from you | Call is muted | Press the stem once on either AirPod to unmute |
| Mic works in one app only | App has no microphone access | Settings, Privacy & Security, Microphone |
| Mic stops when you take one AirPod out | Microphone set to Always Left or Always Right | Change it to Automatically Switch AirPods |
| Voice sounds muffled | Debris on the microphone mesh | Clean the mesh as Apple describes and let it dry |
| Mac uses the wrong mic | Wrong input device | System Settings, Sound, Input, choose your AirPods |
Check that the call is not muted
On AirPods 3, 4, 5 and the Pro models, Apple says a single press of the stem mutes or unmutes you during a call.
That means a stray squeeze while adjusting an AirPod can silence you without you noticing.
In apps such as FaceTime, Apple says you hear a sound and see a message showing whether the microphone is on or off.
Apple also lets you swap the controls so the stem ends calls and mutes with a double press instead, under your AirPods’ settings.
Check the microphone setting
Apple says each AirPod can act as the microphone by default, and you can force one side instead.
- Wear your AirPods and connect them to your iPhone or iPad.
- Open Settings and tap your AirPods’ name near the top.
- Tap Microphone, or tap Audio & Routing first if you do not see it.
- Choose Automatically Switch AirPods.
| Option | What it does, per Apple |
|---|---|
| Automatically Switch AirPods | Either AirPod can be the mic, and if you use only one, it is the mic |
| Always Left AirPod | The left AirPod is always the mic, even when it is out of your ear or in the case |
| Always Right AirPod | The right AirPod is always the mic, even when it is out of your ear or in the case |
On a Mac, Apple says to open System Settings, click your AirPods’ name, and choose Microphone, using Audio & Routing first if needed.
Check app microphone access on iPhone
If the problem only happens in one app, Apple’s microphone page says to check that the app is allowed to use the microphone.
Open Settings, tap Privacy & Security, tap Microphone, and make sure the app you are using is turned on.
If the app already has access or is not listed, Apple says to contact the app’s developer.
Pick your AirPods as the Mac input
Apple says all sound input devices your Mac can use are listed in one place.
- Choose Apple menu, then System Settings.
- Click Sound in the sidebar, scrolling down if needed.
- Click Input and select your AirPods from the list.
You can also drag the input volume slider on that screen to raise a quiet microphone or lower one that distorts.
Clean the microphone meshes
Debris over a microphone can make your voice sound faint, and Apple says to clean only the circled mesh areas in its diagrams.
| Model | Mesh to clean, per Apple |
|---|---|
| AirPods 4 and 5 | The encircled meshes in Apple’s diagram |
| AirPods 3 | Snorkel mesh, control leak mesh and top mic |
| AirPods Pro 2 and Pro 3 | The circled meshes, including the bottom mic on Pro 3 |
Apple says to use a soft-bristled toothbrush with micellar water that contains PEG-6 Caprylic/Capric Glycerides, brushing each mesh in circles for about 15 seconds.
Blot the mesh on a paper towel and repeat three times in total, then repeat with distilled water to remove the residue.
Let the AirPods dry for at least two hours before you use them or put them in the case, and do not run them under water.
On AirPods Pro, remove the ear tips first by pulling firmly at their base.
Try Voice Isolation on supported models
If the other person hears wind or background noise rather than silence, Apple says Voice Isolation can help on AirPods 4, 5, Pro 2 and Pro 3.
Apple says Voice Isolation improves voice quality and reduces background noise, such as wind, for the person listening.
On iPhone or iPad, open Control Center during a call, tap FaceTime Controls, and select Voice Isolation.
On a Mac, click the Video or Microphone icon in the menu bar, click Mic Mode, and select Voice Isolation.
Make sure the AirPods are the active device
Apple’s connection guide says to update your iPhone or iPad to the latest iOS or iPadOS, or your Mac to the latest macOS.
It then says to put the AirPods in your ears, open Control Center, and tap or click the AirPlay button.
If your AirPods appear, select them, and if they do not appear or will not connect, reset the connection as described below.
Reconnect or reset the AirPods
For a bad connection, Apple says to put both AirPods in the case, close the lid, wait 15 seconds, then open it.
If the AirPods connect but still do not pick up your voice, follow our AirPods reset guide to factory reset and pair them again.
If the AirPods will not connect at all, start with AirPods not connecting.
When to contact Apple
Apple’s general headphone page says to check the microphone for blockages such as debris or lint, and to contact Apple Support if its steps do not help.
Before you do, our AirPods firmware guide shows how to check that the AirPods are up to date.
Sources: Change the settings of your AirPods and AirPods Pro, Make and answer calls with AirPods, If the microphones on your iPhone aren’t working, How to clean your AirPods and How to clean your AirPods Pro.