How To Fix AirPods Connected But No Sound (2026)
If your AirPods show as connected but you hear nothing, the audio is usually going somewhere else, or a setting is quieting or pausing it.
Apple has separate pages for output switching, ear detection, balance and volume, and this guide combines them in the order that is fastest to check.
Start with the first table and stop as soon as sound returns.
Quick answer: where the sound went
| Symptom | Likely cause | Fix, per Apple |
|---|---|---|
| Sound plays from the phone speaker or a car | Wrong audio output | Tap the AirPlay button and pick your AirPods |
| Sound stops when you take an AirPod out | Automatic Ear Detection | Wear both AirPods or turn the setting off |
| Another Apple device grabbed the AirPods | Automatic Switching | Switch back by hand or turn automatic switching off |
| One AirPod is silent | Charge, debris or a stuck connection | Charge both for 30 seconds, then retest |
| Sound is very quiet or lopsided | Balance, EQ or Headphone Accommodations | Reset them under Accessibility |
Pick the AirPods as the audio output
Apple says the quickest way to change where audio plays is Control Center.
On an iPhone or iPad, open Control Center and tap the AirPlay button, then choose your AirPods.
On a Mac, open Control Center in the menu bar, click Bluetooth, and select your AirPods.
On an Apple Watch, press the side button, tap the Playback Destination button, and choose them there.
Turn the volume up and update
Apple’s connection guide says to update to the latest iOS, iPadOS or macOS, then select your AirPods and turn up the device volume to test.
Its headphone page also says to raise the volume with the volume buttons or the Volume slider in Control Center.
Make sure Bluetooth is on, under Settings, Bluetooth on an iPhone or iPad, or System Settings, Bluetooth on a Mac.
Check Automatic Ear Detection
Apple says that with this on, audio plays through the AirPods when they are in your ears and pauses when you remove one.
Playback stops when you remove both, and it does not resume on its own.
When you are not wearing them, audio goes to the device speakers instead.
To change it, wear the AirPods while connected, open Settings, tap your AirPods’ name, and use the Automatic Ear Detection switch, tapping Audio & Routing first if you do not see it.
Apple says that with the setting off, all audio goes to the AirPods whether or not you are wearing them.
Stop automatic switching from taking them
Apple says Automatic Switching moves AirPods between devices that use the same Apple Account with two-factor authentication.
It lists AirPods 2, 3 and 4, all AirPods Pro and all AirPods Max as compatible, and says audio should not switch during calls.
| Device | Turn off automatic switching, per Apple |
|---|---|
| iPhone or iPad | Settings, tap your AirPods, More Info, Connect to This iPhone, choose When Last Connected to This iPhone |
| Mac | System Settings, Bluetooth, Options next to the AirPods, Connect to This Mac, choose When Last Connected to This Mac |
| Apple TV | Settings, Remotes and Devices, Bluetooth, turn off Suggest Nearby AirPods |
Apple adds that, on macOS Sonoma, a notification appears on the Mac and you click Connect to confirm the switch.
If only one AirPod is silent
Apple’s one-AirPod page starts by making sure the charging case is fully charged.
- Put both AirPods in the case and let them charge for 30 seconds.
- Open the case near your iPhone or iPad and check each AirPod’s battery status.
- Put the silent AirPod in your ear, close the lid with the other still inside, and play audio.
If that does not help, Apple says to reset your AirPods, and our AirPods reset guide covers every model.
If the sound is quiet or lopsided
Apple says one AirPod can sound louder than the other because of debris or the Balance slider.
Go to Settings, Accessibility, Audio & Visual, then Balance, and center the slider.
Apple also says Hearing Assistance on AirPods Pro 2 and Pro 3 with iOS 18.1 or later overrides your Headphone Accommodations settings.
Other settings that change volume and tone are listed below.
| Setting | Where to reset it, per Apple |
|---|---|
| Headphone Accommodations | Settings, Accessibility, Audio & Visual, Headphone Accommodations, turn it off |
| Music EQ | Settings, Apps, Music, EQ, set to Off |
| AirPods Equalizer | Settings, Bluetooth, info button by your AirPods, Audio & Routing, Equalizer, set to Recommended |
Keep audio in AirPods with a car or speaker nearby
If a car or speaker keeps taking the sound, Apple says to open Settings, General, AirPlay & Continuity on your iPhone or iPad.
Turn on Keep Audio with Headphones, and a banner will appear when a car or speaker is available.
Tap the AirPlay button in that banner to send audio there, and tap Undo to move it back to your AirPods.
Clean the AirPods and the case
Apple says to remove the ear tips on AirPods Pro, check the speaker and microphone mesh, and clear debris using its cleaning guides.
Brush debris out of the charging case port with a dry, soft-bristled brush, and do not insert anything into the ports.
If the case will not charge, see AirPods or charging case not charging.
Reset the connection
Apple says to put both AirPods in the case, close the lid, wait 15 seconds, then open it.
If they still will not pair, follow our AirPods not connecting guide for model-specific pairing steps.
When to contact Apple
Apple says that if its steps do not help, you should contact Apple Support.
Pause first to check for a firmware update with our AirPods firmware guide.
Sources: If your AirPods or AirPods Pro won’t connect, Switch your AirPods to another device, If your left or right AirPod isn’t working, Change the settings of your AirPods and AirPods Pro and Customize headphone audio levels on your iPhone or iPad.