How To Reset AirPods And AirPods Pro: Every Model (2026)
When your AirPods refuse to charge, connect or behave, a factory reset is the step Apple points to after the simple fixes.
The button sequence is not the same on every model, and a wrong sequence is the usual reason the light never flashes white.
This guide gives the exact steps for each generation, which take about two minutes plus the reconnect.
Which reset method does your AirPods model use?
| Model | Reset control | What you wait for |
|---|---|---|
| AirPods 1, 2 and 3 | Hold the setup button on the back of the case for about 15 seconds | Front light flashes amber, then white |
| AirPods Pro 1 and Pro 2 | Hold the setup button on the back of the case for about 15 seconds | Front light flashes amber, then white |
| AirPods 4 (all models) | Three double-taps on the front of the case | Front light flashes amber, then white |
| AirPods 5 (both models) | Three double-taps on the front of the case | Front light flashes amber, then white |
| AirPods Pro 3 | Three double-taps on the front of the case | Front light flashes amber, then white |
| AirPods Max | Hold the listening mode button and Digital Crown for 15 seconds | LED flashes amber, then white |
When should you reset AirPods?
Apple says you may need a reset if the AirPods will not charge or to fix another issue.
Try the quicker checks in our AirPods not connecting guide and our AirPods not charging guide first.
Remember that you will pair the AirPods again afterward, so keep your iPhone or iPad within reach.
How do you reset AirPods 1, 2, 3, Pro 1 and Pro 2?
- Put the AirPods in the charging case, close the lid and wait 30 seconds.
- On a paired iPhone or iPad, open Settings and tap Bluetooth.
- If the AirPods are listed under My Devices, tap the More Info button beside them, tap Forget This Device and confirm.
- Open the case lid.
- Press and hold the setup button on the back of the case for about 15 seconds.
- Wait until the front status light flashes amber, then white.
- Follow the on-screen prompts on your device to reconnect.
If the AirPods do not appear in My Devices, skip the Forget This Device step and go straight to the case.
How do you reset AirPods 4, AirPods 5 and AirPods Pro 3?
These models have no button to hold, so the reset runs on double-taps of the case front.
- Put the AirPods in the case, close the lid and wait 30 seconds.
- Forget the AirPods under Bluetooth settings if they appear in My Devices.
- Open the case lid.
- Double-tap the front of the case while the status light is on.
- Double-tap again when the status light flashes white.
- Double-tap a third time when the light flashes faster.
- Wait for amber, then white, and follow the on-screen prompts.
Apple describes the light only as on, white, faster, amber and white, so watch for the change in speed rather than a specific color at the start.
What should the status light do during a reset?
| Stage | What the status light does | What you do |
|---|---|---|
| Start | Light is on | Double-tap the case front (AirPods 4, 5 and Pro 3) |
| Second stage | Flashes white | Double-tap again (AirPods 4, 5 and Pro 3) |
| Third stage | Flashes faster | Double-tap a third time (AirPods 4, 5 and Pro 3) |
| Reset in progress | Flashes amber | Wait for the next change |
| Reset done | Flashes white | Reconnect with the on-screen prompts |
Is pairing mode the same as a reset?
No, because pairing mode only makes the AirPods discoverable, while a reset also has you forget them and wait for amber.
| Action | AirPods 4, 5 and Pro 3 | Other models | Light goal |
|---|---|---|---|
| Pairing mode | Double-tap the case front | Hold the setup button | White |
| Factory reset | Three double-taps as the light changes | Hold the setup button for about 15 seconds | Amber, then white |
On a Mac, Apple’s connection steps say to pair the AirPods manually.
What should you try before a reset?
Apple’s connection checklist comes first, and a reset is its last step.
- Update the iPhone, iPad or Mac to the latest software.
- Charge both AirPods in the case.
- Turn on Bluetooth and put the AirPods in your ears.
- Check the AirPlay list in Control Center and raise the volume.
- Reseat them by closing the lid for 15 seconds, then reopening it.
What if the light does not flash white?
Apple’s fix is to close the lid for 20 seconds, open it again and repeat the reset for your model.
- AirPods 1, 2, 3, Pro 1 and Pro 2: hold the setup button for about 15 seconds until amber, then white.
- AirPods 4, AirPods 5 and AirPods Pro 3: run the three double-tap sequence again until amber, then white.
How do you reconnect after a reset?
Keep the AirPods in the open case and hold the case near your iPhone or iPad.
Then follow the on-screen steps to set them up again.
How do you reset AirPods Max?
Apple recommends charging the AirPods Max to at least 50 percent first, unless they will not charge.
- Restart: hold the listening mode button and Digital Crown together until the LED flashes amber.
- Factory reset: hold both for 15 seconds and release when the LED flashes amber, then white.
After a reset, reconnect them to an iPhone, iPad, Mac or other device.
AirPods Max can be tied to one Apple Account, so a previous owner must remove them from that account first.
What should you check after the reset?
Confirm the pairing works, and if firmware is a suspect, see our AirPods firmware update guide.
A reset is also the step Apple gives when a firmware update fails, so the two guides work together.
If cancellation sounds wrong afterward, our AirPods noise cancellation guide picks up from there.