How To Fix AirPods Noise Cancellation Not Working (2026)

AirPods noise cancellation that seems weak or dead is usually a setting, a seal or a dirty mesh.

This guide follows Apple’s own troubleshooting steps for AirPods Pro, AirPods 4 (ANC) and AirPods 5.

Check the quick answer table, then work down the sections.

Quick answer: what to check first

SymptomLikely cause and fix
No noise cancellation at allConfirm Noise Cancellation is selected, update software and firmware, then reset
Hiss, squeal or feedbackA microphone may be covered, so clear the external mics
Weak bass or more background noiseEar tip seal or dirty meshes, so run the fit test and clean the AirPods
Audio does not pause when you remove one AirPodReset the AirPods
ANC will not switch on in Settings or Control CenterReset the AirPods

Check that your AirPods have noise cancellation

Apple lists Active Noise Cancellation on specific models only, so the standard AirPods 4 and AirPods 3 will not have it.

FeatureModels
Active Noise CancellationAirPods 4 (ANC), AirPods 5 (both models), AirPods Pro 1, 2 and 3, AirPods Max 1 and 2
Adaptive AudioAirPods 4 (ANC), AirPods 5 (both models), AirPods Pro 2, AirPods Pro 3, AirPods Max 2

Apple’s troubleshooting article covers AirPods Pro 1, 2 and 3, AirPods 4 (ANC) and AirPods 5.

How noise cancellation works and why fit matters

Apple says outward-facing microphones pick up outside sound and counter it with anti-noise.

An inward-facing microphone also works against sound inside your ear.

Transparency does the opposite and lets outside sound in so you can hear your surroundings.

Apple says ANC and Transparency both work best when the AirPods Pro fit well, which is why the seal test comes before cleaning.

Adaptive Audio adjusts the amount of noise cancellation to your surroundings, so it can look like ANC is fading when it is simply adapting.

Update your software and AirPods firmware

Apple’s first step is to update your iPhone, iPad or Mac and confirm the AirPods are on the latest firmware.

To see the version on an iPhone or iPad, open Settings, tap Bluetooth, tap the Info button next to your AirPods and scroll to the About section.

On a Mac, open System Settings, click Bluetooth, then click the Info button next to the AirPods.

Firmware installs by itself when the AirPods are charging near a Wi-Fi connected device, and you can leave them in the case for at least 30 minutes to let it finish.

Keep the external microphones clear

Apple warns that covered external microphones can cause squeals, feedback or other audio problems.

Look over the microphone openings on each AirPod and make sure nothing is sitting on them.

Check the noise control settings

  1. Put the AirPods in your ears while connected.
  2. Make sure Active Noise Cancellation is on; Apple’s pages call it Noise Cancellation on iOS, iPadOS, watchOS and macOS.
  3. Turn off Adaptive Audio, because it changes noise control based on your surroundings.
  4. Play audio, then remove one AirPod and see whether it pauses.

If audio does not pause, or you cannot turn ANC on in Settings or Control Center, Apple says to reset the AirPods.

How to switch listening modes

WhereHow
AirPods 4 (ANC), AirPods 5 and AirPods ProPress and hold the force sensor on either stem until a chime plays
AirPods MaxPress the listening mode button on the right ear cup
iPhone or iPadTouch and hold the volume slider in Control Center, then tap a mode; or open Settings, tap the AirPods name and pick a mode
Apple WatchOpen Control Center, tap the AirPods icon while audio plays, then pick a mode
MacClick the AirPods icon in the menu bar and choose a mode

With both AirPods in, a press cycles through Noise Cancellation, Transparency and Off, plus Adaptive Audio on supporting models.

Why Off or ANC may be missing from the cycle

Off is only available on AirPods Pro 2 and Pro 3, and only after you enable it.

In Settings, tap the AirPods name and turn on Off Listening Mode; if you do not see it, tap Audio and Routing first.

Apple says your hearing is not protected when the mode is Off, and it disables Hearing Protection features.

You can also choose which two or three modes the stem press cycles between under Button Cycles Between on iPhone or iPad, or Press and Hold to Cycle Between on a Mac.

Use noise cancellation with one AirPod

Wearing just one AirPod will not give you ANC by default.

On an iPhone or iPad, go to Settings, then Accessibility, then AirPods under Accessories, tap the AirPods name and turn on Noise Cancellation with One AirPod.

Then press and hold the force sensor as usual.

Test the ear tip seal

A poor seal is a leading reason the noise blocking sounds weak, and Apple says a good seal improves both cancellation and sound quality.

  1. Open Settings and tap Bluetooth.
  2. Tap the Info button next to your AirPods.
  3. Choose the Ear Tip Fit Test on Pro 1 and Pro 2, or the Acoustic Seal Test on Pro 3.
  4. Tap Continue, then tap Play.

If the result is poor, Apple’s article links to guidance on choosing the right ear tip size.

Clean the meshes and the AirPods

Apple says to clean the AirPods if you lose bass or hear more background noise with ANC on.

ModelMeshes to clean
AirPods Pro 2 and 3Only the encircled meshes, including the bottom mic on Pro 3, with the ear tips removed first
AirPods 3, 4 and 5Only the encircled meshes; on AirPods 3 these are the snorkel mesh, control leak mesh and top mic
  1. Saturate a soft-bristled child’s toothbrush with micellar water containing PEG-6 Caprylic/Capric Glycerides, or use a Belkin AirPods cleaning kit.
  2. Brush each mesh in circles for about 15 seconds and blot it on a paper towel.
  3. Repeat for three passes, then repeat with distilled water.
  4. Let the AirPods dry for at least two hours before using or charging them.

Reset, then get service if needed

If ANC still fails after the checks above, Apple says to reset the AirPods; our AirPods connection guide lists the reset steps for each model.

If the problem continues after a reset, Apple says you may need service through getsupport.apple.com.

For crackling or a dead earbud, see our AirPods Pro 3 static guide.

Official sources

Leave a Reply

Your email address will not be published. Required fields are marked *