How To Fix Bad Bluetooth Headset Sound In Windows 11 (2026)
Music sounds fine through a Bluetooth headset on a Windows 11 PC until a Teams call or a game chat starts, and then everything turns flat and muffled.
Microsoft’s own engineers say this is not a fault in the headset: it is how classic Bluetooth audio behaves whenever the microphone is in use.
There are three ways around it, and which one fits depends on whether you need the headset’s microphone and how new your PC is.
Quick answer: pick the fix that fits
| Your situation | What to do |
|---|---|
| Sound goes muffled the moment a call or chat starts | Use a different microphone, so the headset only plays sound |
| You never use the headset’s own microphone | Turn off Handsfree Telephony for the headset |
| The PC and the headset both support LE Audio | Set Format when microphone is active to Stereo (2 channels) |
| Sound is poor even with no call running | Set a 16-bit, 48000 Hz, 2-channel format and update the Bluetooth driver |
Why the sound drops when the microphone turns on
A Microsoft post on its Windows OS Platform Blog explains that classic Bluetooth audio has two separate modes, called profiles.
| Profile | Microphone | What you hear |
|---|---|---|
| A2DP | Cannot use it | High-quality stereo |
| HFP, the Hands-Free Profile | Works | Mono at lower fidelity |
| LE Audio (TMAP) | Works | Super wideband voice at a 32 kHz sample rate, with stereo on supported PCs |
As soon as an app opens the microphone, a classic headset has to leave A2DP and switch to HFP.
Microsoft says the original HFP compression only supported an 8 kHz sample rate, which strips out most of the treble.
Newer Windows 11 versions and most modern headsets double that with what is called wideband voice, but the sound stays mono.
The blog’s own comparison is that the result is closer to AM radio than to CD quality.
The same post is clear that a classic Bluetooth device cannot play stereo while its microphone is in use.
Fix 1: use a different microphone
If the headset’s microphone is never opened, the headset has no reason to switch to hands-free mode.
A Microsoft Q&A moderator gives this as a workaround: keep the headset as the output and set a separate microphone as the input.
- Select Start > Settings > System > Sound.
- Under Output, choose your Bluetooth headset.
- Under Input, choose another microphone, such as the laptop’s built-in one, a webcam or a USB microphone.
- Open the audio settings of your call or chat app and pick the same microphone there.
The app step matters, because an app that is still set to the headset’s microphone will open it anyway.
Our guide to changing the default speakers or microphone in Windows 11 covers the Input list in detail.
Fix 2: turn off Handsfree Telephony
The same moderator’s first suggestion is to switch the hands-free service off for that headset.
- Press Windows key + R, type control panel and press Enter.
- Go to Hardware and Sound > Devices and Printers.
- Right-click the headset and choose Properties.
- Open the Services tab.
- Clear Handsfree Telephony and select Apply.
The headset’s own microphone stops working on this PC while that box is clear, so only use this if you have another microphone.
If you cannot reach that Properties window on your PC, use the method in the next section instead.
Or disable the hands-free entries in Sound
- Open Sound settings and select More sound settings.
- On the Playback tab, disable the entry named Headset (Hands-Free).
- On the Recording tab, disable the headset’s microphone.
This comes from the same Microsoft Q&A answer, and it is a moderator’s advice, not a Microsoft support article.
Fix 3: use LE Audio, which keeps stereo during calls
LE Audio is the newer Bluetooth audio standard, and Microsoft says it replaces A2DP and HFP with profiles that carry media and voice together.
Windows 11 now supports what Microsoft calls super wideband stereo, which lets an LE Audio headset play in stereo while its microphone is on.
| Requirement | What Microsoft states |
|---|---|
| Windows | Windows 11, version 24H2 or newer; build 26100.4484 or newer for stereo with the microphone on |
| PC hardware | Bluetooth LE support built in at the factory |
| PC drivers | Updated Bluetooth drivers from the PC maker that support LE Audio stereo |
| Headset | Headphones, earbuds or speakers that support LE Audio |
Without LE Audio support or the right drivers, Microsoft says you hear mono whenever the microphone is used.
To see whether the PC supports LE Audio at all, open Start > Settings > Bluetooth & devices > Devices and look under Device settings for Use LE Audio when available.
If that switch is missing, the PC does not currently support LE Audio.
Turn on stereo for when the microphone is active
- Pair and connect the LE Audio headset.
- Go to Settings > System > Sound.
- Under Output, select the arrow to the right of the headset.
- Expand Output settings, then expand Format.
- Under Format when microphone is active, choose Stereo (2 channels).
Windows already defaults to stereo when both the PC and the headset support it.
If Format when microphone is active does not appear, Microsoft says the system does not support stereo during microphone use, and to update Windows and the drivers or contact the PC maker.
If stereo causes glitches on calls
Microsoft notes that some accessories struggle with stereo while the microphone is active, which shows up as lost audio or glitches.
In that case set Format when microphone is active to Mono (1 channel).
Also check Settings > Accessibility > Audio, because Windows warns that stereo may not work correctly while the system-wide mono audio switch is on.
If the sound is poor even with no call running
Poor sound with the microphone off is a different problem, and Microsoft’s Bluetooth audio page has its own steps for it.
- Open the headset’s Output settings in Start > Settings > System > Sound and choose a 16-bit, 48000 Hz, 2-channel format.
- Check the headset’s documentation to confirm it supports A2DP.
- Remove the headset in Bluetooth & devices and pair it again.
- Update the Bluetooth driver in Device Manager.
A headset that plays in one ear only is covered in our Bluetooth sound on one side guide, and dropouts are in Bluetooth keeps disconnecting.
Which PCs get stereo during calls
Microsoft’s blog post, published in August 2025, said some existing PC models would receive the needed driver updates later that year.
It also said most new mobile PCs launching from late 2025 would have support from the factory.
Microsoft added that it plans to bring CD-quality playback to game chat and calls in a future Windows update, with no date given.
One side effect it lists: Spatial Audio in Microsoft Teams, which depends on stereo, now works over LE Audio with a compatible headset and PC.
If Teams itself cannot hear you, see Teams microphone or camera not working.