|

How To Fix No Drives Found During Windows 11 Setup (2026)

Windows Setup sometimes shows an empty list when it asks where to install Windows.

On many newer Intel PCs the drive is there, but Setup cannot see it until you load a storage driver from a USB stick.

This guide follows Intel’s and Dell’s support pages and shows which driver to load, where to find it and what to avoid changing.

Quick answer: the fix in one table

StepWhat to doSource
1Download the Intel Rapid Storage Technology (RST) driver from your PC maker or from IntelDell and Intel support pages
2Extract the driver files to a USB flash driveIntel article 000094664
3Restart Setup, choose Load driver, then Browse to the USB driveIntel article 000092508
4Pick the Intel RST VMD Controller and click NextDell article 000188116
5Select the drive that now appears and continueIntel article 000092508

Why Windows Setup cannot see the drive

Dell explains that 11th to 14th Gen Intel processors use Intel Volume Management Device (VMD) technology.

With retail Windows media or a Media Creation Tool download, the Intel RST driver must be loaded during Setup before the drive shows up.

Dell adds that images made with the Dell OS Recovery Tool or SupportAssist OS Recovery do not have this problem.

Intel describes the same symptom as no storage drives being available to select as the destination drive on 12th and 11th Gen platforms.

If you still need to build the installer, follow the guide to creating a Windows 11 installation USB drive first.

What you need before you start

  • A working PC to download and extract the driver.
  • A USB flash drive for the driver files, or the same drive that holds your Windows installation media.
  • Your PC’s service tag or model name, if you buy from Dell or another maker with its own driver page.

Step 1: Download the Intel RST driver

Dell’s route starts on its support site.

  1. Go to dell.com/support, enter the computer’s service tag and search.
  2. Open the Drivers and Downloads tab and select the Storage category.
  3. Find the Intel Rapid Storage Technology Driver and click Download.

Intel itself recommends that end users take driver updates from the system manufacturer or Windows Update, because makers often customise Intel’s generic drivers.

Intel’s own download for 12th to 15th Gen platforms is a file named SetupRST.exe, listed at 8.1 MB for version 20.2.6.1025.3.

Intel adds that it supports 64-bit Windows 10 and Windows 11.

Step 2: Extract the driver to a USB drive

For a Dell package, the downloaded executable has a long name that ends in WIN64 and a version number.

  1. Double-click the downloaded file to start extraction.
  2. Click Extract and choose your USB flash drive as the destination.
  3. Click Close when it finishes.

For Intel’s SetupRST.exe, Intel gives a command that creates the driver folder.

  1. Open PowerShell or Command Prompt as administrator and go to the folder that holds SetupRST.exe.
  2. Run the command ./SetupRST.exe -extractdrivers SetupRST_extracted
  3. Copy the new SetupRST_extracted folder to the USB drive.

Intel says the RST install window opens and the folder is created.

Step 3: Load the driver in Windows Setup

Plug the USB drive into the PC you are installing to.

  1. Start or restart the Windows 10 or Windows 11 installation.
  2. On the screen that says Setup cannot find any drives, select Load driver.
  3. If a prompt says to insert driver media, select OK.
  4. If a Drivers Not Found prompt appears, click OK.
  5. Select Browse and open the folder that holds the driver files.
  6. Choose the folder described in the table below and select OK.
  7. Select Intel RST VMD Controller and click Next.
  8. Select the drive in the list and click Next to continue installing.
Your processorFolder Dell tells you to select
11th Gen or newerThe VMD folder, or its f6vmdflpy-x64 subfolder
10th Gen or olderThe F6 folder, then f6flpy-x64

Dell’s sample paths are IRST\production\Windows 10-x64\15063\Drivers\VMD and IRST\F6\f6flpy-x64.

Dell notes that screenshots may differ because Intel updates the drivers often, but the steps apply to the latest versions.

If the drive still does not show

Intel says to repeat the steps with the Intel RST driver from your device manufacturer’s website.

The VMD driver generation also matters, according to Dell’s compatibility table.

VMD driverWorks onDoes not work on
TGL VMD 18.3.xTiger LakeAlder Lake, Raptor Lake
ADL VMD 19.2.xTiger Lake, Alder LakeRaptor Lake
ARL VMD 20.2.xTiger Lake, Alder LakeRaptor Lake
RPL VMD 19.5.xTiger Lake, Alder Lake, Raptor LakeNone listed

Dell says those versions were correct only when written, so look for the newest VMD driver for your exact model.

BIOS settings that matter with VMD

Intel’s VMD guide says to make BIOS changes before installing the operating system.

Changing them afterward can cause an Inaccessible Boot Device error.

  • Enable the VMD controller and the storage ports that hold your drives.
  • Assign the SATA controller to VMD if you use RAID or Optane volumes.
  • Set boot mode to UEFI, because Intel says Legacy boot causes failures with RST.

Intel advises doing this only with your system vendor’s guidance, because BIOS and volume changes carry risk.

The guide to opening BIOS or UEFI settings in Windows 11 shows how to reach those menus.

After Windows is installed

Intel’s guide says to run SetupRST.exe inside Windows once the install finishes.

The installer puts in the RST driver and then starts installing the Intel Optane Memory and Storage Management app from the Microsoft Store.

Intel warns not to uninstall the RST VMD driver, because doing so can cause an Inaccessible Boot Device error and possible data loss.

If VMD is on but no devices are attached, Intel still says to install the driver to avoid a warning icon in Device Manager.

Intel’s download page also warns that Optane should not be enabled when installing or using this driver on Windows 24H2 and newer.

Once Setup sees the drive, a blank disk may still need partitioning, which is covered in setting up a new hard drive or SSD in Windows 11.

If Setup complains about the partition style, read how to convert MBR to GPT in Windows 11.

A Dell laptop that fails to boot after install may instead need the no boot device found fix.

Samsung drive owners can also read how to install the Samsung NVMe driver.

When to contact support

If the drive is missing even after loading the correct driver, contact your PC maker.

Dell and Intel both point owners back to the manufacturer’s page for the right driver for a specific model.

Official sources: Intel drive not detected during Windows install, Intel RST driver zip extraction, Intel VMD and RST setup, Dell no drives found article.

Leave a Reply

Your email address will not be published. Required fields are marked *