Is your LG Magic Remote control slow to respond? There are several factors that can cause this problem such as a weak battery power, remote needs to be paired, button on the remote is stuck, or even a software glitch. To fix this you will need to perform a series of troubleshooting steps.
LG is a popular company that makes various consumer products including Smart TVs. The company’s Smart TV lineup are one of the best models available as they have various features such as a OLED display or even an 75 inch 4K display to provide a great viewing experience.
Why is my LG TV not responding to the remote?
One of the issues that you might experience with your LG TV remote control is when it has a slow response. You will notice that the TV will lag when trying to use the remote control. This can be a frustrating experience as you won’t be able to effectively control your LG TV,
Here’s what you need to do to fix LG Smart TV remote control issue.
Solution 1: Soft reset your LG TV
One factor that can cause the LG Smart TV unresponsive remote is a software glitch. This can be due to the TV’s internal memory being overloaded or the TV’s operating system has crashed. In order to fix this, you just need to soft reset your LG TV.
Press and hold the power button on the TV for at least 10 seconds.
When the LG TV turns off unplug its power cord from the power source. You will know it is off when the power button lights is no longer lit.
Wait for a minute before plugging the power cord back to the power source then turn on the LG TV.
Try checking if the LG TV unresponsive remote issue still occurs.
Solution 2: Clear cache on LG TV
One of the reasons why your LG TV will lag is because of a full cache memory. When the memory gets full then there’s a possibility that the TV will have a slow response time since it can’t access the required amount of memory it needs to run smoothly. To fix this, you need to clear cache of your LG TV.
Clear cache LG TV
Select Settings on the main menu of your LG TV using the remote control.
Scroll down and select General then Clear Cache.
A confirmation message will appear; click OK to proceed.
The cache will be cleared and your LG Smart TV should now run more smoothly.
Try checking if you still experience the unresponsive remote control issue.
Solution 3: Replace the batteries of your TCL TV remote control
One of the reasons why your LG TV will have a slow response time is because of dying batteries.
You replace the batteries with new ones. If possible, try using a rechargeable battery so that you only need to charge this if it gets drained in the future.
Replace the batteries of remote
- Open the battery cover found at the back of the TV remote.
- Remove the batteries from the battery compartment.
- Put in the new batteries.
You should only use new batteries and not old ones. Also check for poor battery contact as this will prevent the remote control from being used. Make sure that the battery fits tightly and is making contact with the battery terminals of the remote control.
In case you don’t have any new batteries available at the moment then you can try resetting the remote by performing these steps.
- Remove the batteries out of your TCL TV remote.
- Wait 2-3 minutes
- Reinsert the batteries.
Try checking if the issue has been fixed.
Solution 4: Check the internet connection of your LG TV
If the TV remote stops working when you are using streaming apps then you need to make sure that the LG TV has a good internet connection. You can check the internet speed using some of the popular online speed checker tools.
Checking your internet speed
Open a browser on your LG TV.
Go to speedtest.net. This is an online speed test tool that is free to use.
Click on Go. This will start the speed test.
In order to prevent any slow response issues on your Smart TV you should have a stable internet connection. The results should match your subscription plan from your internet service provider.
If you are experiencing internet connection issues then try checking if this is caused by your networking equipment.
- Turn off your Smart TV.
- Unplug your Modem and Router from the power source.
- Wait for a minute then plug your modem and router back into the power source.
- Wait until the lights turn back on.
- Turn on the TV.
- Reconnect your TV to the internet.
Here’s what you can do to get a stable Wi-Fi internet connection.
- Try to disconnect other devices connected to the Wi-Fi router while you use the LG TV. This will allow the TV to use the maximum internet bandwidth.
- Move the TV closer to the router . This will allow the device to get a much stronger Wi-Fi signal.
- If you have a dual band router try to connect to the 5Ghz band instead of the 2.4.
Solution 5: Get the latest software updates for your LG TV
It’s important for your LG TV to run on the new update as this will have several enhancements as well as bug fixes that could fix the slow response issue you are experiencing.
Update LG TV software manually
Go to Settings using the LG Smart TV remote control.
Go to All settings.
Go to Support.
Select Software update.
Select Check for Updates. If an update is available then select Download and Install.
After getting the latest software update try checking if the LG TV remote issue still occurs.
Solution 6: Perform a factory reset on your LG TV
In case the slow remote control issue persists on your television then you will need to reset it to initial settings. This will bring back the LG TV to its default factory settings and usually fix any problems caused by a corrupted software.
Factory reset LG TV
Press the Settings button on the remote.
Go to All Settings.
Open the General tab.
Select Reset to Initial Settings.
Click OK to confirm.
After the factory reset has completed try to check if the same problem occurs.
Solution 7: Get a new Vizio Remote
Sometimes this problem can already be caused by a remote issue. To fix this you should replace this with a new LG TV remote. If your area does not have any LG TV remotes available then you can also use a universal remote.
Frequently Asked Questions
How to test IR signal of LG remote control?
Open the camera app of your smartphone then direct the remote towards the camera.
Press and hold the power button on the remote control.
Look into the camera, you will see that colored light is blinking on the remote. This indicates that the remote is sending IR signal.
If no light is coming from the IR sensor of the remote, it means the remote is not working. You will need to replace the remote batteries or the remote itself.
How to reset LG TV remote control?
Open the back/battery cover of your TV remote.
Remove the batteries and set them aside.
Now, press and hold the power button on your remote for a minute.
Insert the batteries back in the remote.
How Do I Fix a Delayed TV Remote?
Clear anything between your TV remote and its receiver.
Clean the remote and the receiver with a soft cloth to remove dust, fingerprints, and other debris.
Ensure you’re within the required range to keep the remote’s signal strong.
How to Fix an Unresponsive Remote?
Replace the batteries if they’re not charged or are failing
Turn on the TV.
Hold the syncing button on the front of the remote and behind the smart TV’s signal receiver.
Release both sync buttons once they’re blinking together.
Test your remote.
Can you control LG TV without remote?
Your LG TV has physical buttons which you can use to control it. Most Smart TVs will also work with the Google Home app on your phone.