|

How To Fix An LG TV Screen That Flickers (2026)

A flickering LG TV is usually caused by something outside the panel, such as an HDMI cable, a weak broadcast signal or a power-saving setting.

LG’s support pages separate those causes with one quick check: whether the TV’s own menu flickers too.

This guide follows LG’s order, from that menu test to the signal-strength screens, with the menu path for each webOS generation.

Quick answer: match what you see to the fix

What you seeLikely cause (per LG)First fix
Menu stays steady, picture flickersExternal device or cableReconnect the HDMI cable
Menu flickers as wellFault inside the TVContact LG Customer Support
Flicker on antenna or cable channels onlyWeak or unstable broadcast signalCheck signal strength in Manual Tuning
Flicker in one streaming app onlyApp picture or playback settingsDelete and reinstall the app
Brightness rises and falls with room lightEnergy Saving is activeTurn Energy Saving off

LG’s first check separates a TV fault from a source fault.

Press the Settings or Volume button on the remote and watch the on-screen menu.

  • Menu looks normal: LG says the problem is likely the external device or its cables.
  • Menu flickers too: LG says the TV itself may be at fault and points you to Customer Support.

Do this before touching any settings, because it tells you which of the next steps are worth your time.

Step 2: reseat the HDMI or antenna connection

A loose or worn cable can corrupt the signal, and LG lists this as a main cause of flicker.

  1. Turn off the TV and every connected device, such as a set-top box.
  2. Unplug the HDMI cable from the back of the TV and plug it back in firmly.
  3. If you can, unplug and reconnect the other end at the external device too.
  4. Check the antenna cable for damage or a loose connection.

One LG page recommends an authentic HDMI cable and names Version 2.0 as the one to use.

Step 3: check the broadcast signal strength

If the flicker only appears on antenna or cable channels, the signal may be the cause.

LG notes that antenna broadcasts do not depend on your internet connection, so check the signal itself.

The menu path depends on the TV’s webOS version.

TVPath to the signal screen
webOS 25 (2025 TVs)Settings > All Settings (top left) > General > Channels > Channel Tuning > Manual Tuning > select your antenna
webOS 6.0 and up (2022 and later per LG)Settings > All Settings > General > Channels > Channel Tuning > Manual Tuning > select your antenna
webOS 5.0 and below (2021 and earlier per LG)Settings > All Settings > Channels > Channel Tuning > Manual Tuning > select your antenna
Older webOS, cable TVSettings > All Settings > Channels > Channel Search > Manual Channel > Cable DTV

LG gives the 2021 cut-off differently on two pages, so use your TV’s own menu to see which path it has.

What do the signal numbers mean?

LG gives specific thresholds for deciding whether the signal is the problem.

ReadingWhat LG saysWhat to do
Strength 50% or lessVery weak signalContact your building maintenance office or service provider
Strength and quality both below 70%Very weak signalContact your building maintenance office or service provider
Strength or quality swings by more than 30%Unstable broadcast signalContact your property management office or broadcast provider

Another LG page uses a slightly different line, under 50% strength, and tells you to contact your provider in that case.

Step 4: run the Picture Test on older webOS TVs

LG’s older-model pages use the built-in Picture Test to check whether every channel flickers.

TVPath to Picture Test
2019 or earlier, webOSSettings > All Settings > Picture > Picture Test
webOS 5.0 (2020)Settings > All Settings > Customer Support > Additional Settings > Picture Test

If the test picture looks normal, LG says the broadcast signal is the likely cause and you should contact your set-top service provider.

If the flicker continues during the test, LG says to contact an LG Electronics Service Center.

Flicker in only one streaming app

If the picture flickers in a single app, LG says the app’s own picture or playback settings may be responsible.

If that does not clear it, delete the app and reinstall it.

If that does not clear it, delete the app and reinstall it, and see how to hard reset your LG TV if several apps misbehave.

Brightness that rises and falls

Some people describe a changing brightness as flicker.

LG says Energy Saving mode raises and lowers brightness with the lighting in the room.

TVPath to turn Energy Saving off
webOS 23 and 24Settings > gear icon > General > Energy Saving > Off
webOS 21 and 22Settings > All Settings > Support > Energy Saving > Energy Saving Step > Maximum > Off
webOS 5.0 and olderSettings > All Settings > Picture > Energy Saving > Maximum > Off

LG gives no steps for webOS 6.0 through 20 on that page.

It also warns that picture settings can differ by input, so reapply your preferred picture mode after switching between broadcast and HDMI.

If the screen is simply too dark rather than changing, read our LG TV dim screen guide.

Flicker with a scratchy sound

LG has a separate page for flicker that comes with a scratchy noise from the OLED or other models.

Its causes are the same two: a bad HDMI connection to the set-top box and a weak broadcast signal.

Work through the HDMI and signal steps above, in that order.

If the screen goes fully dark instead of flickering, see our guide to the LG TV black screen.

If the whole TV stops responding, see LG TV is frozen.

When to contact LG

LG says to contact Customer Support if the TV menu flickers even with all cables reconnected.

For a stubborn case, LG’s page directs you to its website chatbot or to a technician visit request.

SituationLG route
Menu flickersContact LG Customer Support
Test picture flickers on older TVContact an LG Electronics Service Center
Flicker persists after all stepsUse the LG chatbot or request a technician visit

Sources

The steps above come from LG’s own help library pages: continuous screen flickering, if your LG TV screen flickers and screen brightness changing intermittently.

Leave a Reply

Your email address will not be published. Required fields are marked *