|

How To Download And Install A Lexmark Printer Driver (2026)

To get a Lexmark printer working properly on a PC, you download the driver package for your exact model from Lexmark’s support site and run the installer.

Lexmark says that package installs the print, scan and fax drivers in one go.

This guide walks through the download, the installer, a manual method through Windows Update, and what to pick when the page offers several downloads.

Quick answer: download and install the Lexmark driver

StepWhat to do
1. PrepareConnect a USB cable, or put the printer and computer on the same network and note the IP address on the printer display
2. Open the siteGo to support.lexmark.com and select Drivers & downloads
3. Find your modelType the model in Search by Device Model and select Find Drivers & Downloads
4. DownloadUnder Recommended Driver, select Download Driver Package, accept the license and select Start Download
5. InstallRun the installer and follow the on-screen instructions

Lexmark’s page gives these same steps for every operating system, so they apply on Windows and on Mac.

Before you start

Lexmark’s install page asks for one of two setups, depending on how the printer connects.

ConnectionWhat Lexmark says to do first
Network printerConnect the printer and the computer to the same network and write down the IP address shown at the top of the printer display
Local printerConnect the printer to the computer with a USB cable

If you cannot find the model number, the Drivers & downloads page has a help section for locating it.

Download the driver package

  1. Open the Lexmark support site and select Drivers & downloads.
  2. Enter your printer model in the Search by Device Model field, such as MB2236, which is the example Lexmark shows.
  3. Select Find Drivers & Downloads.
  4. Choose your operating system and OS version if the page has not detected them.
  5. In the Recommended Driver section, select Download Driver Package.

If no products match, Lexmark says to check the spelling and try again.

Accept the license and start the download

Lexmark does not start the download until you review the license agreement.

  1. Scroll to the end of the license agreement.
  2. Tick the agreement box.
  3. Select Start Download.

The confirmation window lists the file name, file size, SHA-256 hash, operating system, languages, release date, version, release notes and supported products.

Run the installer

Open the downloaded file, then follow the on-screen instructions.

Lexmark says installing the software lets the printer communicate with the computer and enables full functionality.

It also says the installer simplifies network or wireless setup.

When it finishes, add the printer through the installer or, if needed, follow our Windows 11 add a printer guide.

What else the downloads page can offer

The results for your model can include more than one file, and Lexmark labels each type.

ItemWhat Lexmark says it is
Recommended DriverThe package to download first, shown as Download Driver Package
Print Support ApplicationThe Xerox Print and Scan Experience app, which needs Windows 11 and the latest printer firmware
Recommended FirmwareA firmware package, shown as Download Firmware Package
Additional downloadsA table with the file, type, OS, OS version, languages, release date, size and link, which you can filter

If the page cannot detect your operating system, use the table filters to choose it yourself.

Linux users should pick a driver from the Additional downloads compatible with section instead of the recommended driver.

When you may not need the package

Lexmark says that, depending on your operating system, you can connect the printer with the Microsoft IPP Class Driver or AirPrint instead.

For some devices the downloads page recommends AirPrint on a Mac rather than a driver package.

The trade-off is features, because Lexmark says you need the printer software to get custom and full printing features.

Manual install through Windows Update

If Windows does not detect the printer, Lexmark’s Windows 10 article describes a manual route through the Add Printer wizard.

That article covers Windows 10 only, so menu names on Windows 11 can differ.

  1. Open Devices and Printers and select Add a printer.
  2. Select The printer that I want isn’t listed, then Add a local printer or network printer with manual settings.
  3. For USB choose Use an existing port, or for a network printer choose Create a new port and Standard TCP/IP Port.
  4. For a network printer, enter the hostname or IP address and a port name.
  5. Select Windows Update and wait for the list to refresh.
  6. Select Lexmark under Manufacturers, then your printer under Printers.

Lexmark warns that refreshing the list from Windows Update can take up to an hour.

Driver types you may see in the list

Lexmark’s article says the list can show several driver types for one model.

TypeDetail from Lexmark
PS3, XL, XPSModel drivers that may appear in the list
Class (V4)Driver included with Windows, with Class Driver in its name
HBPHost Based driver
Model specificV4 drivers downloaded from the maker’s website or Windows Update

Replacing an existing driver

If a driver is already installed, the wizard asks which version of the driver you want to use.

Lexmark says the wizard suggests keeping the current driver, and that you should choose Replace the current driver so the files are fully replaced.

It adds that a Copy1 or Copy2 suffix is added to the printer name when you replace a driver.

You can then delete the old printer entry, as our guide to removing a printer in Windows 11 explains.

For driver problems after a Windows update, see our guide to updating or rolling back a printer driver.

The Lexmark Universal Print Driver

Lexmark also offers a Universal Print Driver, a single driver meant for administrators who want one driver in place of one per model.

Lexmark says it covers over 200 mono and color laser printers and multifunction devices, local or networked.

The Windows emulation drivers are for Windows Vista or later and come in 32-bit and 64-bit versions.

On Mac, Lexmark offers separate color and mono packages that run on both ARM and Intel.

If you also update firmware

Lexmark warns that a firmware update may change printer settings.

It says an update can also stop cartridges with non-Lexmark chips, depleted Return Program cartridges and unauthorized parts from working.

Do not turn the printer off during an update, and if it fails, restart the printer and try again.

Lexmark says a printer cannot be downgraded to an earlier firmware version once it is updated.

If Windows 11 blocks the driver

On newer Windows 11 builds, Windows protected print mode can stop third-party drivers from working.

Lexmark’s page on that mode is covered in our guide to Lexmark printers and protected print mode.

Other makers are covered in our Brother driver guide and Epson driver guide.

If the install still fails

Lexmark’s downloads page says to use its contact support page for further help.

It lists the phone number 1-800-539-6275 in the page footer.

The software can send data to Lexmark such as product registration, supply levels, configuration, software version and fault codes, which Lexmark says does not let it read your documents.

Sources

Leave a Reply

Your email address will not be published. Required fields are marked *